Skip to main content
Actalent logo

Manufacturing Engineer

Actalent

Durham, NCContract$45–55/hrSeen 1 day agoIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
$45–55/hr
Location
Durham, NC
Schedule
Contract
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Bachelor's degree, required

Job overview

The Manufacturing Engineer II owns products from a manufacturing perspective throughout the production lifecycle, focusing on engineering change management, BOM development, manufacturability, process improvement, and shop-floor support. The role improves manufacturing methods, standardizes work, optimizes layouts and material flow, and collaborates with cross-functional teams to support production and product changes. It is a hands-on, fully onsite contract-to-hire position in Durham, North Carolina.

Skills & qualifications

RequiredNice to have

Skills

Cross-Functional Collaboration, required5S, nice to haveStandard Work, requiredStandard Operating Procedures, requiredWork Instructions, requiredFlowcharts, requiredProduction Data Analysis, requiredContinuous Improvement, requiredKaizen, requiredValue Stream Mapping, requiredProcess Mapping, requiredFacility Layout Design, requiredBOM Management, requiredCAD, requiredTime Studies, requiredCapacity Analysis, requiredMaterial Flow Optimization, requiredMethods of Manufacture, requiredKanban, requiredDesign for Manufacturing and Assembly, requiredJig and Fixture Design, requiredPoka-Yoke, requiredERP Systems, requiredPLM Systems, requiredPart Nesting, requiredLean Manufacturing, requiredPFMEA, requiredAutoCAD, requiredIFS, requiredFusion PLM, requiredG-Code, nice to haveProblem Solving, nice to have

Qualifications

Bachelor's in Engineering, required4+ Years Manufacturing Experience, requiredLean Green Belt Certification, nice to haveGenerator Set Assembly Experience, nice to haveSwitchgear Assembly Experience, nice to haveMetal Fabrication Equipment Experience, nice to have

Benefits

Medical Insurance
Dental Insurance
Vision Insurance
401(k) Match
Paid Time Off

Full job description

Job Title: Manufacturing Engineer IIJob Description

This role is a hands-on Manufacturing Engineer position with full product ownership from a manufacturing perspective. You will support products throughout the entire production lifecycle with a strong focus on engineering change order (ECO) management, bill of materials (BOM) development, manufacturability, process improvement, and direct shop-floor support. The Manufacturing Engineer II ensures efficient Methods of Manufacture (MoM), drives Lean Manufacturing improvements, and develops standardized work instructions to enable fast response to BOM, design, and process changes that impact assembly operations. You will collaborate closely with cross-functional teams to ensure designs are manufacturable to required specifications, optimize facility layouts, and promote a strong lean manufacturing culture.

Responsibilities

  • Collaborate cross-functionally across departments to support and achieve operational goals.

  • Lead 5S initiatives on the shop floor to improve organization, safety, and efficiency.

  • Develop, implement, and continuously improve processes, including Standard Work, standard operating procedures (SOPs), work instructions, and flowcharts.

  • Analyze production data to identify waste, process bottlenecks, and opportunities for improvement.

  • Plan, organize, and facilitate continuous improvement activities such as kaizen events, Value Stream Mapping (VSM), and process mapping.

  • Design and optimize work center layouts to improve the use of space, materials, personnel, and equipment.

  • Support BOM setup, including creation and maintenance of product structures and routings.

  • Maintain and update facility layouts in CAD to reflect process improvements, equipment relocations, and operational growth.

  • Conduct time studies and observations to understand current performance and identify improvement opportunities.

  • Perform capacity analysis and drive material flow improvements using tools such as pacing charts and Methods of Manufacture.

  • Partner with Material Planning to enhance material flow, including implementing Kanban systems and point-of-use storage.

  • Collaborate with manufacturing engineering teams and technical stakeholders on product improvements, including Design for Manufacturing and Assembly (DFMA), machine capabilities, tooling aids, and poka-yoke solutions.

  • Provide hands-on support to the shop floor on manufacturing processes, troubleshooting issues, and implementing corrective actions.

  • Develop practical solutions and recommendations for leadership to address manufacturing challenges and improve performance.

  • Promote, reinforce, and model a Lean manufacturing culture throughout daily activities.

  • Design and develop tools, jigs, fixtures, and equipment to improve process efficiency, quality, and safety.

  • Nest parts for fabrication equipment such as lasers, water jets, and copper punch machines to optimize material usage and throughput.

  • Manage and support ECO processes within the PLM environment to ensure accurate and timely implementation of changes.

  • Create and maintain accurate work instructions and documentation within ERP and PLM systems to support consistent production.

Essential Skills

  • Bachelors degree in Engineering, preferably Industrial or Mechanical Engineering.

  • At least 4 years of experience in a manufacturing environment.

  • Hands-on manufacturing experience supporting products directly on the shop floor throughout production.

  • Proficiency in ECO (Engineering Change Order) management within a PLM environment.

  • Experience creating and maintaining bills of materials (BOM), product structures, and routings.

  • Demonstrated experience with Lean Manufacturing and Continuous Improvement methodologies.

  • Ability to develop and improve processes, including Standard Work, SOPs, work instructions, and flowcharts.

  • Experience with process improvement tools such as Value Stream Mapping (VSM), process mapping, and PFMEA.

  • Skill in designing and optimizing work center and facility layouts using CAD tools (such as AutoCAD).

  • Experience conducting time studies, capacity analysis, and material flow improvements.

  • Familiarity with Methods of Manufacture (MoM) and standardization of work instructions.

  • Ability to design and implement jigs, fixtures, tooling aids, and poka-yoke solutions.

  • Experience with ERP systems (such as IFS) for manufacturing and BOM management.

  • Ability to work within PLM systems (such as Fusion) to manage product data and engineering changes.

  • Competence in nesting parts for fabrication equipment such as lasers, water jets, and copper punch machines.

  • Strong cross-functional collaboration and communication skills with production and engineering teams.

Additional Skills & Qualifications

  • Green Belt certification in Lean or Continuous Improvement is preferred.

  • Experience in the assembly of generator sets, switchgear, and/or metal fabrication equipment is preferred.

  • Knowledge of G-code and its application in fabrication or CNC equipment programming.

  • Experience promoting and sustaining a Lean manufacturing culture.

  • Familiarity with Kanban systems and point-of-use storage for material flow optimization.

  • Ability to interpret and apply DFMA principles to improve manufacturability and assembly efficiency.

  • Comfort working with Fusion PLM or similar product lifecycle management systems.

  • Experience with continuous improvement events such as kaizen workshops and structured problem-solving sessions.

Work Environment

This role operates in a hands-on production shop floor environment where you spend significant time working directly with manufacturing operations. You will interact frequently with production team members, engineering, material planning, and other cross-functional stakeholders, requiring a high level of coordination and clear communication. The environment involves working around fabrication equipment such as lasers, water jets, and copper punch machines, as well as assembly areas for complex products. You will use CAD tools to maintain and update facility and work center layouts, and work within ERP and PLM systems to manage BOMs, routings, and engineering changes. The culture emphasizes Lean manufacturing, continuous improvement, and active engagement on the shop floor, offering the opportunity to contribute to a major manufacturing scale-up and to take true ownership of both product and process.

Job Type & Location

This is a Contract to Hire position based out of Durham, NC.

Pay and Benefits

The pay range for this position is $45.00 - $55.00/hr.

Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave)

Job Type & Location

This is a Contract to Hire position based out of Durham, NC.

Application Deadline

This position is anticipated to close on Nov 27, 2026.

Workplace Type

This is a fully onsite position in Durham,NC.

About Actalent

Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service.

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email [email protected] for other accommodation options.

San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

How this job compares

Set against the 4,890 open Manufacturing Engineer jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This posting$45–55/hr
  • US median$40–50/hr309 hourly ranges

This range's midpoint, $50/hr, is 14% above the US median midpoint ($44/hr) — in the middle half of Manufacturing Engineer hourly ranges across the US.

Openings
Olive Jobs lists 199 open Manufacturing Engineer jobs in North Carolina and 4,890 across the US. Under 1% of them nationwide are listed as remote or flexible.
Hiring the most in North Carolina
Experience
This posting asks for at least 4 years of experience; Manufacturing Engineer postings that state a minimum ask for 3 years at the median (3,931 postings).
Education
This posting asks for a bachelor's degree; 2,775 of the 4,890 open Manufacturing Engineer jobs (57%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.