Skip to main content

Associate Engineer, Electrical Failure Analysis

Eurofins

Sunnyvale, CAFull-timePosted todayStill listed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
No compensation found
Location
Sunnyvale, CA
Schedule
Full-time
Work Authorization
Work authorization required

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Bachelor's degree, required

Job overview

Eurofins EAG Laboratories seeks an early-career electrical engineer to develop expertise in Electrical Failure Analysis. The role investigates failures in semiconductor devices, electronic components, and assemblies through electrical testing, failure reproduction, and analysis. The engineer works hands-on in a Sunnyvale laboratory with experienced colleagues, building proficiency through training and mentorship. Applicants must meet ITAR U.S. Person status requirements.

Skills & qualifications

RequiredNice to have

Skills

Circuit Analysis, requiredAnalog Electronics, requiredDigital Electronics, requiredSemiconductor Fundamentals, requiredTest Equipment Operation, requiredElectrical Measurements, requiredI-v Characterization, requiredSchematic Reading, requiredStructured Troubleshooting, requiredSafe Lab Practices, requiredESD Controls, requiredElectrical Test Setup, requiredAttention to Detail, requiredTechnical Documentation, requiredCurve Tracing, nice to haveSMU Operation, nice to haveSemiconductor Parameter Analysis, nice to haveOptical Microscopy, nice to haveComponent Testing, nice to haveEMMI, nice to haveIR Thermography, nice to haveLIT, nice to haveMicroprobing, nice to haveTDR, nice to haveATE, nice to haveSEM/EDS, nice to haveX-Ray Analysis, nice to haveFIB, nice to haveCadence, nice to haveSPICE, nice to haveMATLAB, nice to havePython, nice to haveLabVIEW, nice to haveData Analysis, nice to haveTechnical Reporting, nice to haveClear Communication, requiredTeam Coordination, requiredDeadline Management, requiredComputer and Lab Equipment Operation, requiredFine Device Handling, required

Qualifications

Bachelor of Science in Electrical Engineering, requiredU.S. Person Status Under ITAR, requiredHands-on Test Equipment Experience, requiredElectronics or Semiconductor Project Experience, nice to havePPE Use, requiredLift Up to 50 Lbs, required

Benefits

Medical Insurance
Dental Insurance
Vision Insurance
401(k) Match
Paid Time Off
Tuition Assistance

Full job description

Company Description

Eurofins EAG Laboratories is a global leader in electrical and materials analytical testing. Our engineers help companies developing advanced technologies investigate failures, understand materials, and improve product performance. At EAG, you will apply your engineering education to real-world problems in a hands-on laboratory while learning from experienced scientists and engineers.

Job Description

We are looking for an early-career Electrical Engineer, such as a recent BSEE graduate, interested in developing expertise in Electrical Failure Analysis (EFA). You will apply electrical engineering fundamentals to investigate failures in semiconductor devices, electronic components, and assemblies: performing electrical testing, reproducing failures, analyzing results, and working with experienced engineers to determine what happened and why. What You’ll Do

  • Perform electrical bench testing and characterization of semiconductor devices, components, and assemblies using multimeters, oscilloscopes, DC power supplies, signal generators, and other test instruments.
  • Assist with I-V characterization, continuity testing, open/short analysis, leakage measurements, and failure reproduction.
  • Read schematics, compare expected versus measured behavior, and apply structured troubleshooting to isolate potential failure locations.
  • Collect, analyze, and document test data and results, protecting sample integrity and keeping accurate, traceable records.
  • Work with EAG engineers to determine when additional analysis is needed, and communicate findings clearly.
  • Build specialized EFA skills through training, mentorship, and cross-training.
  • Follow EAG safety, quality, confidentiality, ESD, and laboratory procedures.

What Success Looks Like at EAG You do not need to arrive knowing how to operate specialized failure analysis equipment. We are looking for strong electrical engineering fundamentals, hands-on curiosity, good laboratory discipline, and the ability to learn. Early success means learning EAG’s lab, safety, quality, and documentation practices while building proficiency in bench testing and failure reproduction. Over time, you will take on more independent work and more advanced fault-isolation techniques. The goal is to build your ability to follow the evidence, ask the right questions, and turn test results into sound conclusions for our clients. Why EAG? At EAG, you will have the opportunity to:

  • Apply your BSEE to challenging, real-world semiconductor and electronics problems.
  • Learn from experienced engineers and scientists across multiple technical disciplines.
  • Gain hands-on experience with advanced analytical and failure analysis technologies.
  • Work on a variety of client problems while growing through cross-training and increasing responsibility.

Qualifications

Compliance Requirement (ITAR): This position supports work subject to U.S. export control regulations. Applicants must meet U.S. Person status as defined by ITAR: U.S. Citizen, U.S. Permanent Resident (Green Card) or Protected Individual (asylee or refugee) Must Have:

  • Bachelor of Science in Electrical Engineering (BSEE).
  • Strong foundation in circuit analysis, analog and digital electronics, and semiconductor fundamentals.
  • Hands-on academic, research, internship, or project experience with common test equipment (digital multimeter, oscilloscope, DC power supply, signal/function generator).
  • Basic understanding of electrical measurements, I-V characteristics, schematics, and structured troubleshooting, with the ability to distinguish observations from conclusions.
  • Understanding of safe lab practices, including ESD controls and safe electrical test setup.
  • Attention to detail, clear technical documentation, and interest in developing Electrical Failure Analysis expertise.

Preferred Experience

  • Internship, research, capstone, or project experience in electronics, semiconductor devices, electrical testing, troubleshooting, or reliability.
  • Exposure to curve tracing, SMUs, semiconductor parameter analyzers, optical microscopy, or component-level testing.
  • Familiarity with fault-isolation techniques such as EMMI, IR thermography/LIT, microprobing, TDR, ATE, SEM/EDS, X-ray, or FIB.
  • Experience with Cadence, SPICE, MATLAB, Python, or LabVIEW, and with analyzing data and preparing technical reports.

Work Environment & Expectations

  • This is a fully onsite lab role in Sunnyvale, CA
  • Work involves operating lab equipment, handling chemicals/materials, and following safety protocols
  • Schedule may adjust based on priority turnaround times and customer commitments
  • Must be able to coordinate with team members to manage workload and meet deadlines

We encourage you to apply even if your experience is not a 100% match with the position. We are looking for someone with relevant skills and experience, not a checklist that exactly matches the job description. We want to help you grow and in return, you help us grow into a stronger, more inclusive organization. Physical Requirements

  • Ability to continuously operate a personal computer or lab equipment for extended periods (4+ hours).
  • Ability to operate a keyboard and other lab equipment, use a telephone, access file cabinets and other items stored at various levels, including overhead.
  • Must be able to remain in a stationary position 80% of the time.
  • Ability to communicate clearly and understandably in normal conversational distance, over the telephone, and in group settings.
  • Ability to handle small and fragile devices with tweezers and/or fingers.
  • Require close-distance visual acuity with or without correction (glasses, contacts, etc.).
  • Must be willing and able to wear PPE such as respirator, hard-hat, steel-toed shoes, safety glasses, laboratory coat, and other required devices or equipment.
  • Ability to learn new tasks, remember processes, maintain focus, complete tasks independently, and make timely decisions in workflow contexts.
  • Ability to move equipment or items up to 50 lbs.

Additional Information

What It’s Like to Work Here:

  • Teamwork: experience what being a part of the Eurofins-EAG community feels like. Be inspired by your leaders, be encouraged by your teammates and be supported in all parts of your journey while you work with us.
  • Learning & Development: take on career development programs and goal setting to create big possibilities for your career and life. Develop within the company; be mentored and grown as a leader.
  • Diversity & Authenticity: we work hard to embrace diversity and inclusion and encourage everyone to bring their authentic selves to work every day.

Benefits & Perks to Foster Work/Life Balance: ✓ Medical, Dental and Vision Coverage ✓ 401k Company Matching ✓ Paid Time Off ✓ Wellness Program ✓ Education Assistance ✓ …and more! If you enjoy being immersed in technology, tackling problems head-on, finding solutions through teamwork, and taking pride in accomplishments, join us today! Eurofins EAG Laboratories is an equal opportunity employer and prohibits discrimination, harassment, and retaliation in all of our employment practices. Eurofins EAG Laboratories recruits, hires, trains, promotes and administers all employment-related matters based on an individual's qualifications, abilities, and efforts.  Applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, citizenship status, sexual orientation, gender identity and/or expression, pregnancy, genetic information, disability, military and/or protected veteran status, and/or any other category protected by applicable federal, state, or local law. Eurofins EAG Laboratories is a Disabled, and Veteran Equal Employment Opportunity and Affirmative Action employer Check out our other opportunities: www.eag.com/about/careers/

Eurofins USA Material Sciences is a Disabled and Veteran Equal Employment Opportunity employer.

How this job compares

Set against the 3,215 open Electrical Engineering jobs on Olive Jobs, counted November 17, 2026.

Pay
  • This postingNot listed
  • California median$139–210K/yr249 salary ranges
  • California median$33–42/hr49 hourly ranges
Openings
Olive Jobs lists 372 open Electrical Engineering jobs in California and 3,215 across the US. 3% of them nationwide are listed as remote or flexible.
Hiring the most in California
Experience
Electrical Engineering postings that state a minimum ask for 6 years of experience at the median; the middle half ask for 5 to 10 years (2,299 postings).
Education
This posting asks for a bachelor's degree; 1,464 of the 3,215 open Electrical Engineering jobs (46%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 17, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.