Skip to main content
M. C. Dean logo

Electrical Test Technician 3 - Jackson, MS

M. C. Dean

Jackson, MSJobSeen 2w agoIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
No compensation found
Location
Jackson, MS
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Job overview

The Senior Electrical Test Technician 3 develops and oversees electrical testing and operations programs, supports building control systems, and troubleshoots operational problems. The role performs electrical power-system testing, including protective relays, circuit breakers, switchgear, and transformers, while supporting commissioning, safety procedures, and junior technicians. Applicants need at least seven years of relevant electrical experience and a high school diploma or GED; NETA/NICET certification or equivalent hands-on experience is preferred.

Skills & qualifications

RequiredNice to have

Skills

Electrical Testing, requiredSCADA, requiredBuilding Management Systems, requiredRelay Testing, requiredSKM Power Systems, requiredETAP, requiredShort Circuit Studies, requiredArc Flash Studies, requiredElectrical Safety Standards, requiredElectrical Schematics, requiredWiring Diagrams, requiredTechnical Manuals, requiredProtective Relays, requiredCircuit Breakers, requiredTransformers, requiredSwitchgear, requiredDoble, requiredOmicron, requiredMegger, requiredVanguard, requiredFluke Meters, requiredInsulation Resistance Testing, requiredPower Factor Testing, requiredContact Resistance Testing, requiredHigh-Potential Testing, requiredMedium-Voltage Systems, requiredHigh-Voltage Systems, requiredArc Flash Hazard Analysis, requiredTroubleshooting, requiredAnalytical Skills, requiredAcceptance Testing, requiredMaintenance Testing, requiredProtective Relay Calibration, requiredProtective Relay Programming, requiredPrimary Injection Testing, requiredSecondary Injection Testing, requiredRoot Cause Analysis, requiredLockout/Tagout, requiredPPE Compliance, requiredSystem Commissioning, required

Qualifications

7+ Years Electrical Experience, requiredHigh School Diploma or GED, requiredNETA or NICET Certification or Equivalent Hands-on Experience, nice to haveOEM Certified Field Service Training, nice to haveValid U.S. Work Authorization, requiredAbility to Lift 50 Pounds, requiredAbility to Work at Heights, requiredEnglish Communication, required

Benefits

Medical Insurance
Dental Insurance
Vision Insurance
Paid Time Off
Tuition Assistance
401(k) Match
Parental Leave

Full job description

Overview

The Senior Electrical Test Technician 3 works independently on small to medium sized projects or as part of a larger, more complex project. The Senior Electrical Test Technician is responsible for the overall administration, organization, and implementation of the project.

Responsibilities

  • Responsible for developing Electrical Testing Program for duty site and serve as the subject matter expert over the divisions Operation and Maintenance program.

  • Responsible for managing or training operations staff to operate (monitor and control) and update all system (s) control applications maximizing the efficiency of the system being controlled and revising the operating controls as needed to accommodate changes in the facility operations or to correct identified problems/ inefficiencies.

  • Responsible for assisting the development process, methods, standard operating procedures (SOP) and training programs for operators to monitor and control the complex mechanical, electrical, life safety and building control system(s) that comprise the monitor and control.

  • Responsible for assisting the implementation process and procedures set forth using CMMS program to schedule, dispatch, track and report MEP field emergency repair, adjustment, preventive maintenance, and warranty activities.

  • Manages the integration, reliability, and functionality for all the building control system(s) that comprise the mission that include the SCADA, Delta Controls and the Life Safety Systems.

  • Coordinates with the Program Manager while on duty to optimize the performance of monitoring systems and meet the government energy goals.

  • Provides oversight; must be capable of troubleshooting and have the expertise to address operational problems.

  • Assumes supervisory responsibility during electrical testing activities.

  • Assists MEP Operations Manager in developing electrical work and project schedules.

  • Assists in developing and implementing ORM safety procedures and safety meetings. Generate safety reports and maintain related safety records.

  • Trouble shooting, SCADA, Building Management Systems, Relay testing, SKM power systems, ETAP, able to conduct short circuit studies, able to conduct Arc Flash studies

Qualifications

  • Applicants selected must hold a minimum of 7+ years of relevant electrical experience with a High School Diploma/GED

  • Possess a valid/active U.S. Work Authorization

Expectations of Expertise & Knowledge:

  • NETA / NICET certification (preferred) or equivalent hands-on experience in electrical testing.

  • Strong understanding of ANSI, IEEE, NETA, NFPA, NEC, and OSHA electrical safety standards.

  • Ability to interpret electrical schematics, wiring diagrams, and technical manuals.

  • Proficiency in operating and troubleshooting protective relays, circuit breakers, transformers, switchgear, and other electrical equipment.

  • Experience with test equipment such as Doble, Omicron, Megger, Vanguard, and Fluke meters.

  • Understanding of insulation resistance, power factor, contact resistance, and high-potential (Hi-Pot) testing procedures.

  • Knowledge of medium and high-voltage systems (up to 500kV), including arc flash hazard analysis.

  • Strong troubleshooting and analytical skills with the ability to diagnose system failures.

  • Willingness to travel as needed and work in industrial, data center, and utility environments.

  • Ability to work safely under minimal supervision and follow industry best practices.

  • Perform acceptance and maintenance testing of electrical power systems, ensuring compliance with NETA standards

  • Conduct protective relay testing, calibration, and programming for various manufacturers.

  • Perform circuit breaker and switchgear testing, including timing tests, primary and secondary injection testing.

  • Troubleshoot electrical faults and perform root cause analysis for system failures.

  • Conduct transformer testing, including turns ratio, insulation resistance, and power factor testing.

  • Ensure adherence to electrical safety protocols, including lockout/tagout (LOTO) procedures and PPE compliance.

  • Maintain detailed test reports and documentation for compliance and client review.

  • Collaborate with engineers, project managers, and clients to ensure efficient system commissioning and startup.

  • Provide mentorship and technical guidance to junior technicians as needed.

Desired / Advantageous Qualifications:

  • OEM certified field service training program.

We offer an excellent benefits package including:

  • A competitive salary

  • Medical, dental, vision, life, and disability insurance

  • Paid time off

  • Tuition reimbursement

  • 401k Retirement Plan

  • Military Reserve pay offset

  • Paid maternity leave

Abilities

  • The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety.

  • Relocates a 12-foot stepladder without assistance.

  • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.

  • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.

  • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.

  • May use a standard ladder without exceeding the weight limit while carrying tools.

  • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.

  • Apply general rules to specific problems to produce answers that make sense.

  • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).

  • See details at close range (within a few feet of the observer).

  • Listen to and understand information and ideas presented through spoken words and sentences.

How this job compares

Set against the 935 open Electrical Technician jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This postingNot listed
  • US median$65–98K/yr115 salary ranges
  • US median$32–40/hr408 hourly ranges
Openings
Olive Jobs lists 15 open Electrical Technician jobs in Mississippi and 935 across the US. Under 1% of them nationwide are listed as remote or flexible.
Hiring the most across the US
Experience
This posting asks for at least 7 years of experience — more than three in four Electrical Technician postings that state a minimum ask for (median 3 years, across 622 postings).
Education
This posting asks for a high school diploma; 446 of the 935 open Electrical Technician jobs (48%) ask for a high school diploma or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.