Skip to main content
COHERENT logo

EPI Equipment Engineering Technician

COHERENT

Sherman, TXFull-time$21–38/hrSeen 1w agoIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
$21–38/hr
Location
Sherman, TX
Schedule
Full-time
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Security clearance, required

Job overview

The EPI Equipment Engineering Technician performs maintenance and advanced troubleshooting on Zone 3 wafer processing tools, supports engineering projects and data collection, and coordinates with vendors and contractors on equipment work. The role also participates in continuous improvement, team meetings, and the Emergency Response Team. Candidates need a military electronics certification or associate technical degree and at least four years of experience.

Skills & qualifications

RequiredNice to have

Skills

Preventive Maintenance, nice to haveEquipment Troubleshooting, nice to haveMicrosoft Word, nice to haveMicrosoft Excel, nice to haveMicrosoft Outlook, nice to haveMicrosoft PowerPoint, nice to haveDiagram Interpretation, nice to haveMOCVD Process, nice to haveImplant Process, nice to haveSPC, nice to haveRF Systems, nice to haveTest Equipment Operation, nice to haveVacuum Systems, nice to haveWafer Fab Equipment Maintenance, nice to havePrototype Design, nice to haveCommunication, nice to haveIndependent Work, nice to haveTeamwork, nice to haveOrganization, nice to haveLifting 50 Pounds, nice to havePushing or Pulling 150 Pounds, nice to haveStanding for 10 Hours, nice to have

Qualifications

Military Electronics Certification or Associate Technical Degree, nice to have4+ Years Experience, nice to haveERT Clearance, nice to have

Full job description

Primary Duties & Responsibilities

  • Perform preventive maintenance on Zone 3 wafer processing tools as directed by management or equipment engineers.

  • Perform advanced level troubleshooting and repairs on Zone 3 wafer processing tools as directed by management, equipment engineers and or senior technicians.

  • Working with engineering, develops and implements projects for the betterment of the area such as projects that will lower costs, improve efficiency, improve safety, reduce waste, or prevent failures and scraps.

  • Assist engineers in data collection to resolve and prevent reoccurring equipment issues and/or scrap events.

  • Interface with OEM vendors and contractors on satisfactory completion of repairs, upgrades, or modification of processing equipment.

  • Participate in the interpretation of data to aid in CIP and the resolution and optimization of equipment issues.

  • Track, record and communicate progress of work being performed.

  • Be a member of the Emergency Response Team (ERT).

  • Participates in team meetings such as pass downs, continuous improvements, engineering reviews, or problem resolution.

Education & Experience

  • Military Electronics certification or AS technical degree.

  • 4+ years’ experience.

Skills

  • Standalone technician which is an expert on assigned tools; able to troubleshoot complex issues with little to no guidance.

  • Knowledge of basic computer skills and software programs such as:

  • Microsoft Word

  • Microsoft Excel

  • Microsoft Outlook

  • Microsoft PowerPoint

  • Knowledge of how to read electronic schematics, mechanical blueprints, pneumatic diagrams, vacuum diagrams, flow charts, cause effect diagrams, and hydraulic system prints.

  • Understanding of the MOCVD and Implant process.

  • Good understanding of SPC theory and implementation.

  • Fundamental understanding of RF systems, test equipment, and components.

  • Good understanding of vacuum theory, various vacuum pumps such as dry pumps, cryo pumps, turbo pumps, various types of vacuum sensors, pressure control devices, and MFCs.

  • Able to set up, operate, and interpret output of test equipment such as oscilloscopes, DMMs, RGAs, high voltage probes, pressure and temperature gauges, dial indicators, and RF meters.

  • Ability to learn and adhere to established company and departmental policies pertaining to day-to-day operations.

  • Understand and follow both written procedures and verbal instructions in the preventive maintenance of wafer fab equipment.

  • Individual must be self-motivated and be able to organize and manage their planned and unplanned activities in a timely and professional manner.

  • Able to turn an idea into a prototype by designing a part and have it fabricated at a machine shop.

  • Must be able to work both independently and in a team environment.

  • Must be able to communicate effectively utilizing all methods available to them.

  • Must be able to be a member of the Emergency Response Team (ERT).

Working Conditions

  • Must be able to work in a Class 100/1000 clean room.

  • Wear full clean room attire.

  • Work around chemicals such as gases, liquids, acids, solvents, or solids.

  • Work around hazardous and non-hazardous gases.

  • Must be able to pass and maintain an ERT clearance through periodic training and physicals.

  • Must be able to work using a respirator, supplied air, or SCBA equipment.

  • Lift 50 pounds or push/pull up to 150 pounds.

Physical Requirements

  • Must be able to pass and maintain an ERT clearance through periodic training and physicals.

  • Must be able to work using a respirator, supplied air, or SCBA equipment.

  • Lift 50 pounds or push/pull up to 150 pounds.

  • Work a compressed shift (alternate between 3 and 4 consecutive 12 hour shifts weekly).

  • Stand for up to 10 hours a day.

Safety Requirements

  • All employees are required to attend scheduled training, follow the site EHS procedures and Corporate EHS standards. This includes the use of proper protective equipment (PPE) as required by the job responsibilities.

  • Managers will ensure that all safety and environmental procedures are followed consistently. They will ensure that risk assessments are performed, proper training, work instructions, required PPE is available, and will monitor compliance.

  • All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards.

Quality and Environmental Responsibilities

Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System.

Culture Commitment

Ensure adherence to company’s values (ICARE) in all aspects of your position at Coherent Corp.:

I ntegrity – Create an Environment of Trust

C ollaboration – Innovate Through the Sharing of Ideas

A ccountability – Own the Process and the Outcome

R espect – Recognize the Value in Everyone

E nthusiasm – Find a Sense of Purpose in Work

Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

If you need assistance or an accommodation due to a disability, you may contact us at [email protected] .

ABOUT US

Coherent is a global leader in lasers, engineered materials and networking components. We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program. It's an exciting opportunity to work for a company that offers stability, longevity and growth. Come Join Us!

Note to recruiters and employment agencies: We will not pay for unsolicited resumes from recruiters and employment agencies unless we have a signed agreement and have required assistance, in writing, for a specific opening.

Job Identification: 2015621

Degree Level: Associate Degree

Job Schedule: Full time

Pay Scale: $21.00 - $38.00 per hour

LinkedIn: #LI-DM1

How this job compares

Set against the 1,787 open Engineering Technician jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This posting$21–38/hr
  • Texas median$33–58/hr92 hourly ranges
  • US median$32–47/hr745 hourly ranges

This range's midpoint, $29.50/hr, is 35% below the Texas median midpoint ($45/hr) — in the middle half of Engineering Technician hourly ranges in Texas.

Openings
Olive Jobs lists 193 open Engineering Technician jobs in Texas and 1,787 across the US. Under 1% of them nationwide are listed as remote or flexible.
Hiring the most in Texas
Experience
This posting asks for at least 4 years of experience; Engineering Technician postings that state a minimum ask for 2 years at the median (1,396 postings).
Education
19 of the 1,787 open Engineering Technician jobs (1%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.