Skip to main content
Applied Research Associates, Inc. logo

Manufacturing & Capital Engineer 2

Applied Research Associates, Inc.

Madison, ALJobSeen 5 days agoIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
No compensation found
Location
Madison, AL
Work Authorization
Citizenship required

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Secret clearance, required

Job overview

Applied Research Associates seeks a Manufacturing & Capital Engineer 2 to improve and sustain production capability in its Prototype, Manufacturing and Integration Division. The engineer develops tooling and workflows, governs manufacturing process and configuration changes, and leads equipment installation, commissioning, validation, and relocation. The role works with management, engineering, project managers, and technicians, and requires the ability to obtain and maintain a SECRET clearance and pass a national background check.

Skills & qualifications

RequiredNice to have

Skills

Manufacturing Engineering, requiredEquipment Lifecycle Management, requiredEquipment Installation, requiredEquipment Reliability, requiredDesign for Manufacturing, requiredProduction Layout Optimization, requiredCapacity Planning, requiredEngineering Drawing Redlines, requiredJig and Fixture Design, requiredManufacturability Analysis, requiredManufacturing Bill of Materials, requiredOperational Metrics, requiredCost Reduction, requiredConcept of Operations, requiredProduction Documentation, requiredProcess Mapping, requiredLean Manufacturing, requiredPFMEA, requiredRoot Cause Analysis, requiredStructured Problem-Solving, requiredPreventive Maintenance, requiredPredictive Maintenance, requiredTroubleshooting, requiredVerbal Communication, requiredWritten Communication, requiredIndependent Problem-Solving, requiredPersonal Protective Equipment Use, requiredLifting 50 Pounds, requiredDeltek Costpoint, nice to haveSolidworks PDM, nice to haveSmartsheets, nice to haveDefense Manufacturing, nice to have

Qualifications

Bachelor's + 5 Years, Associate's + 8 Years, or High School + 10 Years, requiredSecret Clearance, requiredNational Background Check, requiredLean Manufacturing or Quality Certifications, nice to haveValue-Based Lean Six Sigma, nice to haveAdvanced Manufacturing Certification, nice to have

Full job description

Description

Seeking a Manufacturing & Capital Engineer 2 to support, build, optimize, and sustain the production capability and operational mindset within the Prototype, Manufacturing and Integration (PMI) Division at Applied Research Associates, Inc. (ARA) (https://www.ara.com/) on-site in Madison, AL. As a Manufacturing & Capital Engineer 2, you’ll support the focus on improving production processes, develop tooling using CAD software, create clear work instructions and cost-effective innovative manufacturing solutions. Every day, you’ll work directly with management, engineering, prog./project managers and technician staff regarding manufacturing capabilities to develop clear and efficient workflows that convert engineering designs into delivered products.

The Manufacturing & Capital Engineer 2 will govern changes to manufacturing processes, tooling, equipment, and documentation to maintain process stability and configuration control. This role is instrumental in driving production excellence through manufacturing engineering expertise, equipment and operational process development. This role will plan, lead, and execute installation, commissioning, validation, and relocation of manufacturing equipment to support production capacity, operational efficiency, and business growth. Coordinating equipment moves and new equipment deployments, including logistics, facility modifications, utilities integration, contractor management, and startup activities.

This position will require at minimum the ability to obtain & maintain a SECRET clearance from the US Department of War. Must pass a National Background Check.

We're seeking the following in a Manufacturing Engineer 2:

  • Proven track record in manufacturing environment

  • Proven experience in Equipment Lifecycle Management, Installation & Reliability

  • Design for Manufacturing (DFM) experience and practice

  • Identify manufacturing production cell / plant layout opportunities to determine the optimal layouts and streamline assembly operations to reduce inefficiencies in labor and rework

  • Experience evaluating manufacturing constraints, capacity, and required resources across the production environment

  • Provide redline support to engineering drawings to resolve manufacturing discrepancies

  • Experience in providing design and manufacturing guidance for job aids, weld jigs, alignment jigs, fixtures, and tooling that improve accuracy, repeatability, and efficiency

  • Identify and resolve manufacturability issues arising on the shop floor, collaborating with Operations and Design Engineering to develop robust solutions

  • Ability to own and govern the Manufacturing Bill of Materials (mBOM) and/or Bill of Process throughout the entire product lifecycle

  • Experience identifying and implementing operational metrics and concepts to reduce cost of goods sold (COGS)

  • Ability to develop concept of operations (CONOPs) that define the build sequence, workflow, and optimize production

  • Production documentation (production flow diagram, work instructions, FMEAs and control plans) creation experience

  • Proven experience in process mapping, lean manufacturing, PFMEA , root cause analysis, and structured problem-solving

  • Develop, implement, and continuously improve preventive and predictive maintenance strategies for manufacturing and facility equipment to maximize reliability and uptime

  • Assist in troubleshooting and resolving manufacturing issues to ensure smooth production operations

  • Excellent verbal and written skills needed

  • Independently determine and develop approach to solutions

  • Be physically capable of wearing all required personal protective equipment to include, but not limited to safety glasses, respirator, safety shoes, hearing protection and hand protection as required

  • Ability to perform work which requires sitting, sitting for long periods of time, pushing, pulling, standing, standing for long periods of time, reaching, grasping, bending, climbing, stooping, hold and move items with hand(s), multilimbed coordination, finger dexterity, arm-hand steadiness, vision for close and distance and must be able to lift up to 50lbs individually, 50lbs or more with assistance

Bachelor’s Degree and 5+ years relevant work experience; OR Associate's Degree and 8+ years relevant work experience; OR In lieu of a degree, a H.S. diploma and 10+ years’ experience as Process/Manufacturing Engineer in a manufacturing field

Wish List/Nice if You have:

  • Active / current SECRET Clearance from the US Depart. of War

  • Lean Manufacturing or Quality Certifications

  • Familiarity with defense manufacturing industry

  • Experience with ERP – Deltek Costpoint

  • Solidworks PDM

  • Experience with SmartSheets

Who is ARA?

Applied Research Associates, Inc. (https://www.ara.com/) is an employee-owned international research and engineering company recognized for providing technically superior solutions to complex and challenging problems in the physical sciences. The company, founded in Albuquerque, NM, in 1979, currently employs over 2,200 employee-owners and continues to grow. ARA offices throughout the United States and Canada provide a broad range of technical expertise in defense technologies, civil technologies, computer software and simulation, systems analysis, environmental technologies, and testing and measurement. The corporation also provides sophisticated technical products for environmental site characterization, pavement analysis, and robotics.

*Learn more about who we are and what we do by going to: www.ara.com

ARA offers competitive benefits that address our employees’ needs now and in the future. Learn more about each of our benefits at https://www.ara.com/benefits/

Interested? Please apply at careers.ara.com (https://recruiting.ultipro.com/APP1010ARAI/JobBoard/07442cec-d18e-4589-ab15-8342edc29af7/?q=&o=postedDateDesc&w=&wc=&we=&wpst=) for the Manufacturing & Capital Engineer 2 position. #LI-AB1

Qualifications

Licenses & Certifications

Preferred

  • Value-Based Lean SixSigma

  • Adv Manufacturing

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

This employer is required to notify all applicants of their rights pursuant to federal employment laws.

For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.

How this job compares

Set against the 4,953 open Manufacturing Engineer jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This postingNot listed
  • Alabama median$80–131K/yr53 salary ranges
  • US median$40–50/hr312 hourly ranges
Openings
Olive Jobs lists 114 open Manufacturing Engineer jobs in Alabama and 4,953 across the US. Under 1% of them nationwide are listed as remote or flexible.
Hiring the most in Alabama
Experience
This posting asks for at least 5 years of experience; Manufacturing Engineer postings that state a minimum ask for 3 years at the median (3,976 postings).
Education
2,807 of the 4,953 open Manufacturing Engineer jobs (57%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.