
Nondestructive Tester
U.S. Army Aviation and Missile Command
Corpus Christi, TXFull-time$32.46–41.37/hrPosted 1 day ago
See where you stand before you apply. No sign-up to start.
You apply on the posting's application page, with no Olive account needed.
Watch jobs like this. New roles like this one near Corpus Christi, TX, by email.
Don't just apply. Show up ready.
Olive works from this exact posting.
At a glance
Olive focuses on jobs in the United States, including remote roles you can work from there.
Requirements
Credentials this posting asks for.
Job overview
The Nondestructive Tester supports the Corpus Christi Army Depot’s helicopter and component overhaul, repair, testing, and modernization mission. This developmental position performs radiographic, ultrasonic, and eddy-current inspections, with assignments becoming progressively more difficult. The role includes identifying defects, processing radiographic film or paper, and examining aircraft structures and metallic products. Applicants must meet the applicable grade-level qualifications and, for WG-11, specified NDT Level II certification requirements.
Skills & qualifications
Skills
Qualifications
Full job description
Summary
About the Position: The mission of the Corpus Christi Army Depot is to overhaul, repair, modify, retrofit, test and modernize helicopters, engines and components for all services and foreign military customers. Corpus Christi Army Depot (CCAD) is the Army's Center of Industrial and Technical Excellence for Rotary Wing Aviation Maintenance.
Duties
- This is a developmental position. If the selection should be at the lower grade level the incumbent will perform duties under closer than normal supervision. Assignments become progressively more difficult until the full performance level is reached.
- Use RT methods determine the precise type, magnitude, and orientation of defects such as cracks, porosity, inclusions, incomplete fusion, shrinkage, segregation, incorrect assembly, and other anomalies.
- Responsible for processing radiographic film and/or paper for either automated or manual methods of film processing as required.
- Using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delaminations, and other anomalies.
- Perform EC test examinations using single and double absolute coils and self-comparison and external comparison differential coils on aircraft electrically conductive nonmetallic structures and metallic products.
Qualifications
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Civilian Employees of the Command Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision. Minimum Qualifications WG-09 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision. Can interpret and identify indications that are the result of discontinuities such as cracks, pipe, inclusions, nonmetallic stringers or forging bursts; and then accepts or rejects parts in accordance with authorized acceptance criteria; and set up, calibrate, and safely operate fluorescent penetrate inspection equipment such as spray guns, dip tanks, wash booths, dryers, pressure flow meters, optical magnifiers, and other manual and automatic processing equipment. - Failure to meet this Screen Out Element will result in an ineligible rating. Minimum Qualifications WG-10 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision. Perform under the guidance of a Level II operator, the trainee is responsible for Radiographic (RT), Ultrasonic (UT), and Eddy Current (EC) method of NDT inspection requiring setup, calibration, and safe operation of test equipment for each area. - Failure to meet this Screen Out Element will result in an ineligible rating. Minimum Qualifications WG-11 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision. Setup and safe operation of both conventional and real time X-ray machines to make RT exposures of aircraft nonmetallic structures and metallic castings, forgings, weldments, other wrought products; and using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delamination, and other anomalies. - Failure to meet this Screen Out Element will result in an ineligible rating. Selective Placement Factor #1 WG-11: This position requires a valid Non-Destructive Tester (NDT) Level II certification in Magnetic Particle (MT), Fluorescent Penetrant Inspection (PT) of Non-Destructive Tester (NDT) inspection and NDT Level II certifications in Radiographic (RT), Ultrasonic (UT), and Eddy Current (EC) methods of Non-Destructive Testing (NDT) in order to accomplish the duties of PD AA09324. In accordance with NAS 410 (NAS Certification and Qualification of Nondestructive Test Personnel and CCAD 702-52. Selective Placement Factor #2 WG-11: Using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delaminations, and other anomalies. Responsible for Eddy current (EC) method of NDT requiring setup, calibration, and safe operation of EC test equipment using surface, encircling and inside coils and gap probes with analog and impedance plane display instruments. Responsible for Radiographic (RT) methods of NDT inspection requiring setup and safe operation of both conventional and real time X-ray machines to make RT exposures of aircraft nonmetallic structures and metallic castings, forgings, & weldments. Ability To Do The Work Of The Position Without More Than Normal Supervision Screen Out Ability to Interpret Instructions, Specification, etc. (includes blueprint reading) Ability To Use and Maintain Tools and Equipment Dexterity and Safety Knowledge of Metals Technical Practices (theoretical, precise, artistic) Use of Measuring Instruments PHYSICAL EFFORT: Work in this trade requires the worker to stand, stoop, bend, and reach. The worker will frequently handle items weighing up to 10 pounds and often lift and carry assemblies weighing up to 35 pounds without assistance. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. Eye fatigue occurs from working under black light and viewing radiographs. The worker is required to pass annual vision tests for acuity and color perception. WORKING CONDITIONS: Works is clean, well-lighted and well-ventilated production shop areas. Wears safety shoes, glasses and other protective clothing as required. Exposed to solutions and generally oily parts which may cause dermatitis or allergy conditions. Wears protection clothes as working conditions may warrant. Although working behind appropriate shielding, this worker must operate equipment, which produce ionizing radiation for which some exposure is possible. Working conditions have been considered in the evaluation of this position.
How You Will Be Evaluated
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. You may claim Military Spouse preference. Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level. You may claim Priority Placement Program (PPP) preference. DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only. Only MSP/PPP applicants currently occupying a formal training program position are entitled to exercise their priority status. Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website. Other Information
Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. Direct deposit of pay is required. This is a Materiel Maintenance Management Career Program position aligned under the Logistics Career Management Directorate. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest. Further certification from this announcement may take place up to 90 days beyond the closing date of this announcement. This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
How this job compares
Set against the 315 open Inspection jobs on Olive Jobs, counted November 18, 2026.
- Pay
- This posting$32.46–41.37/hr
- US median$29–63/hr147 hourly ranges
This range's midpoint, $36.92/hr, is 20% below the US median midpoint ($46/hr) — in the lowest quarter of Inspection hourly ranges across the US.
- Openings
- Olive Jobs lists 30 open Inspection jobs in Texas and 315 across the US. Under 1% of them nationwide are listed as remote or flexible.
- Hiring the most in Texas
- Lockheed Martin5 open
- CDM Smith4 open
- MISTRAS Group, Inc.3 open
- Experience
- Inspection postings that state a minimum ask for 5 years of experience at the median; the middle half ask for 4 to 5 years (241 postings).
- Education
- 48 of the 315 open Inspection jobs (15%) ask for a bachelor's degree or higher.
Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.
Prepare for this role
You've read the whole posting — now see how you match it.