Skip to main content
Boyd logo

CNC Programmer

Boyd

Lancaster, PAJobSeen 1mo agoIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
No compensation found
Location
Lancaster, PA
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Job overview

The CNC Programmer operates GIBBS programming and CNC machine tools to create programs for drilling, milling, and boring. The role analyzes drawings and 3D models, develops tool paths and machining parameters, sets up machines, and verifies first articles. It also supports production runs and prepares error-free programs and setup blueprints for CNC operators.

Skills & qualifications

RequiredNice to have

Skills

GIBBS CAM, nice to haveCNC Programming, nice to have3D Modeling, nice to haveTool Path Creation, nice to haveMachine Setup, nice to haveBlueprint Interpretation, nice to haveGeometric Calculation, nice to haveSpeeds and Feeds Calculation, nice to haveMetric Conversion, nice to haveTechnical Writing, nice to haveCommunication, nice to haveProblem Solving, nice to haveStanding, nice to haveWalking, nice to haveLifting 50 Pounds, nice to have

Qualifications

CNC Machinist Associate's or Equivalent, nice to have2 Years Related Experience, nice to have2 Years CNC Programming and 5 Years CNC Machining, nice to haveRead and Interpret Documents, nice to have

Full job description

Job Description

SUMMARY

Operates GIBBS computer programming to generate Computerized Numerical Control (CNC) programs used to control CNC machine tools that drill, mill, bore, etc. by performing the following duties. Machinist Qualifications are required.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Analyzes drawings and specifications to determine program input data such as hole sizes, tool sizes, reference points, and direction of machine cutting paths.

Calculates data such as starting point coordinates (location), size of Fixture Panels and number of Fixtures per Fixture panel.

Using 3D Models extract part Geometry to create tool paths as well as Tool Speeds and Feeds using GIBBS CAM as well as Manually Programming at the machine.

Keys in additional instructions such as tool size, machine feed and speed rates, and starting point coordinates.

When naming the program if possible use part number.

Set up Machines, Cut Fixtures when necessary and Produce the first part to verify program performance and verify correct dimensions.

Submit the first Article to Quality Control and make adjustments when necessary from the CMM Report.

When Necessary Run and complete the entire Production Job.

All Programs and Fixtures should be error free so that a CNC Operator can run the parts. Set up Blueprints should be made with instructions so in the future CNC Operators can set up and run the production jobs.

QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Location: Lancaster, PA

Education and/or Experience: CNC Machinist Associate's degree or equivalent from two-year college or technical school and a minimum of 2 years of related experience, or a minimum of 2 years experience Programming using Computer CNC Programing Software and 5 Years of CNC Machining.

Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and instructions. Ability to communicate effectively to co-workers and other employees of organization.

Mathematical Skills: Ability to calculate Geometry including angles, bolt circles and circle arcs as well as Speeds and Feeds. The ability to work in Metrics and when necessary transfer to Decimal equivalents.

Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; and use hands to finger, handle, or feel. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually moderate.

All Job Posting Locations

Lancaster

Remote Type

On-Site

EEO Statement

Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

How this job compares

Set against the 324 open CNC Programmer jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This postingNot listed
  • US median$79–116K/yr66 salary ranges
  • US median$32–42/hr133 hourly ranges
Openings
Olive Jobs lists 24 open CNC Programmer jobs in Pennsylvania and 324 across the US. None of them nationwide are listed as remote or flexible.
Hiring the most in Pennsylvania
Experience
This posting asks for at least 2 years of experience — less than three in four CNC Programmer postings that state a minimum ask for (median 4 years, across 234 postings).
Education
6 of the 324 open CNC Programmer jobs (2%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.