
Tool Maker
American Outdoor Brands Corporation
Maryville, TNJobSeen 1mo agoIn the employer's feed · checked in the last 2 days
See where you stand before you apply. No sign-up to start.
You apply on the posting's application page, with no Olive account needed.
Watch jobs like this. New roles like this one near Maryville, TN, by email.
Don't just apply. Show up ready.
Olive works from this exact posting.
At a glance
Olive focuses on jobs in the United States, including remote roles you can work from there.
Job overview
The Tool Maker uses equipment such as surface grinder, CNC, wire EDM, and ro grinders to create and modify tooling according to engineering drawings, ensuring high‑quality, tight‑tolerance parts while adhering to quality and production standards.
Skills & qualifications
Skills
Qualifications
Full job description
Req. Number
SWI-7843
Job Description
Use appropriate equipment such as surface grinder, CNC, wire EDM, RO GRINDERS, and equipment to create and make tooling to match part drawings. With the proper equipment have the ability to create angles, radius, on all tooling to create a high quality, tight tolerance parts. These duties are to be performed within quality and production standards.
Education and Experience:
-
Years of experience required varies based on Tool Maker I, II, or II
-
Education: Apprenticeship training program
Competencies and Skills:
-
Demonstrated ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to interpret bar graphs. Good working knowledge of Algebra and Geometry.
-
Knowledge of hydraulic and air clamping systems a plus
-
Must be able to read, write and interpret English language
-
Basic computer skills preferred
-
Injection molding tooling experience preferred
Essential Duties and Responsibilities:
-
Work from engineering drawings to mark out design on raw materials; cutting into shape using manually controlled machine tools (such as lathes, milling machines, grinding machines, jig borers and jig grinders) along with hand tools. Some tasks may be required to be completed utilizing CNC machines and operator performed programming
-
Read blueprints and use necessary measuring devices to make, or modify existing tooling, tools for new or old job prints
-
Make sure tools are sharpened and tool holders in good working condition before being placed back on shelf or in tool drawers. Repair or requisition replacement parts, tooling or hardware as needed to maintain adequate stock
-
Will be required to make Die Making items and maintain existing dies; this could include punches, dies, steel rule dies and die sets
-
Assist production areas in troubleshooting machining processes and equipment problem
-
Work closely with engineering in creating proto-type tooling and parts
-
Check tooling in and out of tool room computer
-
Set-up and operate all tool room
-
Utilize hydraulic and air clamping systems on occasion
-
Must be able to understand and perform to quality standards, methods, usage of inspection devices and reporting as required
-
Perform specialty operations as requested by mold makers and tool management (EDM, Bridgeport, grinding, polishing, etc)
-
Help fine-tune molds based on feedback from molding department and requests from mold makers
-
Repair molds based on feedback from molding department
-
Change mold versions
NOTE: This list presents only the principal duties of the position and is not intended to be comprehensive. The duties and responsibilities listed above may be changed or supplemented at any time in accordance with business needs and conditions.
Physical Demands:
-
Works in a manufacturing environment
-
Able to lift and move up to 55 pounds occasionally
-
Able to stand, sit, stoop, squat and walk
NOTE: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
W ork Environment and Personal Protective Equipment:
Within any of our facilities, employees may be exposed to manufacturing noise, airborne liquid chemicals, fine particulate dust, ambient temperatures, and industrial lighting. Work environment is similar to most manufacturing and distribution operations. May be exposed to excessive noise, temperatures, hazards associated with working around moving machinery, work in confined quarters, exposure to vibrations and shop lighting, continuous exposure to hot temperatures, may be humid, odors, dust, continuous exposure to mechanical hazards, and occasional exposure to chemical hazards.
The following Personal Protective Equipment is required: Safety glasses with side shields and hearing protection required when on manufacturing floor. The use of additional personal protective equipment (PPE) may be required when a job task(s) is being completed in or around your assigned department or in another department, this includes safety eyewear, hearing protection, and safety footwear.
Updated 9/21/2026
How this job compares
Set against the 609 open Machinist jobs on Olive Jobs, counted November 18, 2026.
- Pay
- This postingNot listed
- US median$71–92K/yr64 salary ranges
- US median$27–36/hr292 hourly ranges
- Openings
- Olive Jobs lists 14 open Machinist jobs in Tennessee and 609 across the US. Under 1% of them nationwide are listed as remote or flexible.
- Hiring the most across the US
- SpaceX27 open
- RTX Corporation20 open
- GE Vernova17 open
- Experience
- Machinist postings that state a minimum ask for 3 years of experience at the median; the middle half ask for 2 to 5 years (432 postings).
- Education
- 1 of the 609 open Machinist jobs (under 1%) ask for a bachelor's degree or higher.
Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.
Prepare for this role
You've read the whole posting — now see how you match it.