Skip to main content
Lockheed Martin logo

Project Engineer Sr Stf - E5

Lockheed Martin

Grand Prairie, TXFull-time$129–240K/yrSeen todayIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
$129–240K/yr
Location
Grand Prairie, TX
Schedule
Full-time
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

AS9100, requiredISO 9001, required

Job overview

The CNC Machining Capability Project Engineer evaluates, selects, and develops external suppliers for complex CNC milling and turning operations. The role partners with Supply Chain, Strategic Sourcing, Supplier Quality, and Operations to assess capabilities, resolve technical issues, reduce cost and risk, and support supplier performance. It also provides hands-on machining expertise to connect engineering intent with supplier execution.

Skills & qualifications

RequiredNice to have

Skills

CAD/CAE, requiredGD&T, requiredBOM Management, requiredPLM/ERP Tools, requiredEarned Value, requiredRisk Registers, requiredSchedule Control, requiredLeadership, requiredCommunication, requiredMentoring, requiredStakeholder Influence, requiredTechnical Reporting, requiredExecutive Reporting, requiredIndustry Standards, requiredRoot-Cause Analysis, requiredContinuous Improvement, requiredCNC Machining, nice to haveCAD/CAM, nice to haveTooling Selection, nice to haveCutting-Parameter Optimization, nice to haveMulti-Axis CAM Software, nice to haveProcess Planning, nice to haveFixturing, nice to haveQuality Control, nice to haveSetup Sheets, nice to haveWork-Holding Design, nice to haveCMM/Laser Inspections, nice to haveISO/AS9100 Procedures, nice to haveSchedule Tools, nice to haveLean/Six Sigma, nice to haveMachining Documentation, nice to haveStatus Reporting, nice to havePresentations, nice to haveTeamcenter, nice to haveSAP, nice to haveBOM Change Control, nice to haveMachine-Tool Safety Standards, nice to haveSupplier Audits, nice to have

Qualifications

10+ Years Engineering Experience, required4+ Years Leading Large Projects, required$5M+ Project Budget, required10+ Team Members, requiredAS9100, requiredISO 9001, requiredITAR/EAR, requiredRelevant Engineering Degree or Equivalent Experience and Certifications, nice to havePMP/PRINCE2 or Advanced Degree, nice to have

Benefits

Medical Insurance
Dental Insurance
Vision Insurance
401(k) Match
Paid Time Off
Parental Leave
Tuition Assistance

Full job description

Standard Job Description

The CNC Machining Capability Project Engineer is the technical person for evaluating, selecting, and developing external machining suppliers for complex CNC milling and turning operations (3 to 5 axis). In addition to deep technical expertise, this role requires strong business acumen—the ability to translate capability data into strategic sourcing decisions that drive cost savings, revenue protection, and market competitiveness.

This role partners closely with Supply Chain, Strategic Sourcing, Supplier Quality, and Operations to evaluate machining capabilities, resolve technical issues, reduce cost and risk, and ensure suppliers can meet quality, delivery, and performance requirements.

This position bridges the gap between engineering intent and supplier execution, providing hands-on machining expertise to support supplier selection, development, and ongoing performance

Focus Areas:

Supplier Technical Evaluation & Selection

  • Lead technical assessments of machining suppliers, including:

  • CNC milling/turning (3–5 axis)

  • Complex tolerances & GD&T

  • Materials (aluminum, titanium, steel, Inconel, composites, etc.)

  • Support RFQ/RFP reviews by:

  • Review drawings for machining types

  • Match suppliers to drawing requirements, quality requirements, volume and program needs

  • Manufacturability concerns

  • Process assumptions

  • Cycle times and cost drivers

  • Support PO Kickoffs and drawing reviews with the supplier

  • Participate in source selection decisions as the machining technical authority

Basic Qualifications

10 + years of engineering experience with at least 4 years leading large, multi‑disciplinary projects (≥ $5 M budget, 10+ team members).

Expert in CAD/CAE, GD&T, BOM management, and PLM/ERP tools; strong command of Earned Value, risk registers, and schedule control.

Proven leadership and communication skills – able to mentor teams, influence senior stakeholders, and produce clear technical and executive reports.

Familiarity with applicable industry standards and regulations (AS9100, ISO 9001, ITAR/EAR, etc.) and capable of driving root‑cause analysis and continuous‑improvement initiatives.

Desired Skills

Bachelor’s (or higher) degree in a relevant engineering discipline or equivalent experience and certifications; PMP/PRINCE2 or advanced degree preferred.

Advanced CNC & CAD/CAM expertise – Proficient with 3‑, 4‑ and 5‑axis machining, tooling selection, cutting‑parameter optimization, and multi‑axis CAM software (e.g., Mastercam, Siemens NX, HyperMILL).

Process planning, fixturing & quality control – Develop detailed setup sheets, design work‑holding, program CMM/laser inspections, apply GD&T, and follow ISO/AS9100 quality procedures.

Project‑management & continuous‑improvement – Use Earned‑Value, risk registers, and schedule tools (MS Project/Primavera); drive root‑cause analysis, Lean/Six‑Sigma projects to cut cycle time, scrap and tool wear.

Cross‑functional communication & documentation – Translate engineering requirements into clear machining documentation, status reports, and presentations for designers, suppliers, customers, and senior leadership.

Integrated systems, safety & adaptability – Work with PLM/ERP (Teamcenter, SAP) for BOM and change control, adhere to machine‑tool safety standards (ISO 12100/ANSI B11), and travel to on‑site facilities for audits and project execution.

Pay Information

GeoZone Definition: GeoZones are geographic groupings created by Lockheed Martin to align compensation ranges with regional labor markets and cost-of-labor differences across the United States. Locations are assigned a Geo Zone based on the primary work location of the role.

  • Full-time salary range (GEOZONE 1): $161300.00 - $299500.00

  • Includes metropolitan areas such as Sunnyvale CA; Pal Alto, CA; New York City metropolitan area; Newark, New Jersey; etc.

  • Full-time salary range (GEOZONE 2): $145100.00 - $269500.00

  • Includes metropolitan areas such as Denver, CO; King of Prussia, PA; Stratford, CT; Moorestown, NJ; etc.

  • Full-time salary range (GEOZONE 3): $129000.00 - $239600.00

  • Includes metropolitan areas such as Dallas–Fort Worth, TX; Orlando, FL; Grand Prairie, TX; Marietta, GA; etc.

  • Full-time salary range (GEOZONE 4): $116100.00 - $215700.00

  • Includes metropolitan areas such as Camden, AR; Lexington, KY; Lufkin, TX; etc.

At Lockheed Martin, we know mission success starts with taking care of our people. Our Total Rewards program is designed to attract top talent, support your well-being, and help you grow—both professionally and personally.

The salary range for this position is as listed on the requisition. Please note that the salary information listed is a general guideline only.

Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market(work location) and business considerations when extending an offer.

Benefits offered: Medical, Dental, Vision, Flexible work arrangements and schedules (e.g., 4x10), 401(k) match, Paid time off, Holidays, Parental Leave, EAP, Flexible Spending Accounts, Education Assistance, Life Insurance, Short-Term Disability, and Long-Term Disability.

  • Annual short-term and/or long-term incentive compensation programs may be offered depending on the position. Payments under these annual programs are not guaranteed and can vary from year to year and are tied to a range of performance metrics.

  • For (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.

Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

How this job compares

Set against the 4,477 open Project Engineer jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This posting$129–240K/yr
  • Texas median$90–151K/yr161 salary ranges
  • US median$96–147K/yr2,501 salary ranges

This range's midpoint, $184K, is 51% above the Texas median midpoint ($122K) — in the top quarter of Project Engineer salary ranges in Texas.

Openings
Olive Jobs lists 471 open Project Engineer jobs in Texas and 4,477 across the US. 3% of them nationwide are listed as remote or flexible.
Hiring the most in Texas
Experience
This posting asks for at least 10 years of experience — more than three in four Project Engineer postings that state a minimum ask for (median 5 years, across 3,541 postings).
Education
2,751 of the 4,477 open Project Engineer jobs (61%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.