Skip to main content
Northrop Grumman logo

U103 Inspector B

Northrop Grumman

Sunnyvale, CAJobSeen 1 day agoIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
No compensation found
Location
Sunnyvale, CA
Work Authorization
Citizenship required

Olive focuses on jobs in the United States, including remote roles you can work from there.

Job overview

The Inspector B monitors manufacturing processes and inspects fabrications, assemblies, components, purchased materials, and tooling for compliance with customer and Northrop Grumman specifications. The role performs dimensional and functional testing, verifies inspection equipment calibration, documents defects, and advises shop personnel on quality procedures. It also provides guidance to lower-classified inspectors and works with manufacturing, engineering, government inspectors, customers, and vendors to clarify standards and address material issues.

Skills & qualifications

RequiredNice to have

Skills

Inspection, requiredMetrology, requiredEngineering Drawing, requiredGeometric Dimensioning, requiredBlueprint Interpretation, requiredMaterial Specifications, requiredHandheld Inspection Tools, requiredMRP/ERP Systems, requiredFaro, nice to haveCMM Setup, nice to havePC-DMIS, nice to haveMaterial Property Verification, nice to haveSAP, nice to haveNDT Report Reading, nice to haveDCMA, nice to have

Qualifications

High School Diploma or GED, requiredEngineering Drawing Coursework, requiredMetrology Coursework, requiredPhysics Coursework, requiredMathematics Through Trigonometry, required2 Years Inspector Experience, required2 Years Micrometer Experience, required2 Years Caliper Experience, required2 Years Optical Comparator Experience, required2 Years Geometric Tolerancing Experience, required2 Years Engineering Drawing Experience, required2 Years Handheld Inspection Tool Experience, required

Full job description

RELOCATION ASSISTANCE: No relocation assistance available

CLEARANCE REQUIRED FOR START: No

CLEARANCE TYPE: None

TRAVEL: No

Description

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.

PRIMARY FUNCTION:

Monitor the manufacturing processes and operations and conduct inspections of a broad range of fabrications, subassemblies, assemblies, component parts, purchased material and tooling to assure compliance with customer and NG specifications and standards where procedures and techniques are normally established.

WORKING PROCEDURE:

THE FOLLOWING ARE THE USUAL MAJOR JOB DUTIES BUT THIS DESCRIPTION DOES NOT PRECLUDE THE PERFORMANCE OF OTHER DUTIES BY THE INCUMBENT, NOR THE QUESTION BEING RAISED ON THE PROPER RATE FOR THE ASSIGNMENT.

In addition to the duties of the Inspector “C”, performs the following:

  1. Inspect and test components, assemblies, tooling, weldments and materials of various geometric configurations and processes as specified and randomly for compliance with established customer and NG specifications and standards where procedures and techniques are normally established. Identify and tag defective parts, material an incorrect processes with appropriate inspection documentation.

  2. Setup and use measuring equipment including surface plates, optical tooling and coordinate measuring machines where procedures and techniques are normally established. Apply analytical evaluation methods and calculations involving triangulation, compound angles, etc., as necessary throughout the inspection cycle. Serialize and maintain a log for parts, assemblies, tooling, etc.

  3. Perform mechanical and electrical functional acceptance tests on purchased and manufactured parts and material such as Brinell & Rockwell hardness, non-destructive, spring, etc Review and verify that incoming purchase orders, parts, materials and related documentation received are in compliance with established specifications and standards.

  4. Verify that inspection instruments such as micrometers, fixture gauges and thread gauges, etc., are within the designated calibration period prior to use.

  5. Perform similar or lower classified work as required.

SCOPE, PURPOSE AND FREQUENCY OF CONTACTS:

Manufacturing To inspect and evaluate material and clarify standards - Frequent

Engineering To clarify standards or to evaluate questionable material - Occasional

Resident Government/Inspectors To discuss defective parts/materials and clarify standards - Frequent

Customer Representatives/

Underwriter Inspectors

Purchasing/Vendors To discuss defective materials - Frequent

DIRECTION OF OTHERS:

Advise shop personnel in proper procedures with regard to quality problems. Provide guidance to lower classified inspectors.

DIRECTION RECEIVED:

Receives work assignments from supervisor and accomplishes work assignments essentially on own initiative. May receive assistance and guidance from higher classified inspectors.

This is a Union Represented position.

BASIC QUALIFICATIONS:

  • High School Diploma or equivalent GED and courses in Engineering Drawing, Metrology, Physics and Mathematics through Trigonometry or the equivalent.

  • Minimum of 2 years' experience as an Inspector.

  • Minimum of 2 years experience with products such as Micrometers, calipers, and optical comparator.

  • Minimum of 2 years experience with drawings using the geometric tolerancing and dimensioning system and with reading/interpreting engineering drawings/blueprints.

  • Knowledge and understanding of material specs (Mil-spec, ASTM, AMS etc).

  • Minimum of 2 years experience using various handheld (manual and auto) inspection tools.

  • Experience using an MRP/ERP system.

  • US Citizenship required.

PREFERRED QUALIFICATIONS:

  • Experience with Faro and CMM setup and using PC-DIMS.

  • Experience verifying chemical and mechanical properties of the materials heat report.

  • SAP Knowledge.

  • Experience reviewing and verifying incoming purchase orders, parts, materials and related documentation received are in compliance with established specifications and standards.

  • Familiarity with Reading NDT reports.

  • Experience working with DCMA.

#MPR

The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.

Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job Category: Non NGJF

How this job compares

Set against the 517 open Quality Inspector jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This postingNot listed
  • US median$60–93K/yr69 salary ranges
  • California median$26–37/hr56 hourly ranges
Openings
Olive Jobs lists 78 open Quality Inspector jobs in California and 517 across the US. Under 1% of them nationwide are listed as remote or flexible.
Hiring the most in California
Experience
This posting asks for at least 2 years of experience; Quality Inspector postings that state a minimum ask for 3 years at the median (338 postings).
Education
This posting asks for a high school diploma; 258 of the 517 open Quality Inspector jobs (50%) ask for a high school diploma or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.