Skip to main content
Ralliant logo

Electrical Hardware Design Engineer

Ralliant

Spartanburg, SCJob$83–155K/yrSeen 4 days agoIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
$83–155K/yr
Location
Spartanburg, SC
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Bachelor's degree, required

Job overview

Anderson-Negele seeks a hands-on Electrical Hardware Design Engineer to own electronics for hygienic sensors and measurement systems from architecture through production and certification. The role includes personally designing and routing PCBs, validating boards, supporting manufacturing, and maintaining product compliance. Candidates should have industrial or similarly regulated hardware experience and direct certification experience; industrial instrumentation, protocols, and hygienic or hazardous-environment experience are preferred.

Skills & qualifications

RequiredNice to have

Skills

Hardware Design, requiredPCB Layout and Routing, requiredAltium, requiredKiCad, requiredProduct Certification, requiredSafety Standards, requiredEMC Standards, requiredAnalog Design, requiredMixed-Signal Design, requiredMicrocontroller Systems, requiredPower Supplies, requiredIsolation, requiredSignal Conditioning, requiredCircuit Protection, requiredBoard Bring-Up, requiredDebugging, requiredLab Instrumentation, requiredPCB Manufacturing, requiredIndustrial Instrumentation, nice to haveTemperature Sensors, nice to havePressure Sensors, nice to haveLevel Sensors, nice to haveFlow Sensors, nice to haveWeighing Systems, nice to have4–20 Ma, nice to haveHART, nice to haveIO-Link, nice to haveModbus, nice to havePROFINET, nice to haveEtherNet/IP, nice to haveHygienic Design, nice to haveHarsh-Environment Design, nice to haveHazardous-Location Design, nice to haveFunctional Safety, nice to haveRF, nice to haveWireless Connectivity, nice to haveIoT Connectivity, nice to haveDesign Reviews, nice to haveMentoring, nice to have

Qualifications

Bachelor's in Electrical Engineering, requiredMaster's Degree, nice to have5+ Years Hardware Design Experience, requiredTwo Products From Concept to Production, required

Full job description

Anderson-Negele is seeking a hands-on Electrical Hardware Design Engineer in Spartanburg, SC who has taken electronic products from a blank schematic to a certified, shipping industrial product. You will own the hardware for new hygienic sensors and measurement systems end to end: architecture, schematics, PCB layout and routing (done yourself), board bring-up, and UL, CSA, CE and EMC certification. Our products run 24/7 in food, beverage and pharmaceutical plants, so we need someone who designs for compliance from day one.

Key Responsibilities

New product design, concept to production

  • Own new product electronics from a clean sheet: requirements, architecture, component selection, schematics, prototypes and production release

  • Design analog, mixed-signal, power and microcontroller circuits for industrial sensing (RTD/NTC, 4–20 mA, HART, industrial I/O), with simulation, worst-case analysis and derating

  • Lead and participate in schematic and PCB design reviews

PCB layout and routing (hands-on ownership)

  • Personally lay out and route your boards; layout is not handed off to another group or service bureau

  • Own the PCB end to end: placement, stack-up, multilayer routing (mixed-signal, power, high-voltage, controlled impedance), libraries, design rules and fab/assembly outputs

  • Work with fabricators and contract manufacturers on DFM, DFT, Gerber/BOM reviews, prototype builds and production ramp-up

Design for compliance and certification

  • Design to UL, CSA and CE (LVD, EMC, RoHS) from the first schematic, applying UL/IEC 61010-1 safety rules (creepage, clearance, isolation, fault conditions) and IEC 61326-1 / IEC 61000-4-x immunity

  • Run pre-compliance testing, work with third-party labs (UL, CSA, TÜV, Intertek) through certification, and maintain technical files and critical component lists

Validation, sustaining and collaboration

  • Bring up and validate new boards using oscilloscopes, spectrum, logic and power analyzers; write and execute DVT plans, including environmental testing

  • Support the manufacturing production floor as part of sustainment: be on hand to resolve build and test issues, assist with troubleshooting, and lead root cause analysis of hardware, manufacturing and field failures

  • Drive reliability, cost and obsolescence redesigns while protecting existing UL/CSA/CE listings

  • Work closely with mechanical, firmware, manufacturing, quality and product management, and communicate design intent to vendors and certification bodies

Required Qualifications

  • BS in Electrical Engineering (MS preferred) and 5+ years of hands-on hardware design on industrial or similarly regulated products

  • Proven ownership of at least two electronic products from concept through production, designed from scratch rather than modified

  • Hands-on PCB layout and routing: you have personally routed multilayer boards that went into production (Altium, KiCad or similar)

  • Direct experience taking a product through UL, CSA and/or CE certification, including resolving safety and EMC findings with test labs

  • Working knowledge of safety (UL/IEC 61010-1, UL 508, IEC 62368-1) and EMC (IEC 61326-1, IEC 61000-4-x, CISPR 11) standards

  • Strong grasp of analog and mixed-signal design, microcontroller systems, power supplies and isolation, signal conditioning, and circuit protection (ESD, surge, transients)

  • Experience with board bring-up, debugging, lab instrumentation, and PCB/contract manufacturers

  • Be ready to walk us through a product you designed, layouts you routed, and the certifications it earned

Preferred Qualifications

  • Industrial instrumentation or sensor experience (temperature, pressure, level, flow, weighing)

  • Industrial protocols: 4–20 mA/HART, IO-Link, Modbus, PROFINET or EtherNet/IP

  • Hygienic processing environments (food, beverage, pharma; 3-A, EHEDG) and harsh[1]environment design (washdown, IP67/IP69K)

  • Hazardous location (ATEX/IECEx, Class I Div 2), functional safety (IEC 61508), or MID/NTEP experience

  • RF, wireless or IoT connectivity with FCC/RED compliance

  • Experience leading design reviews or mentoring engineers

#LI-MW1

Ralliant Corporation Overview

Ralliant, originally part of Fortive, now stands as a bold, independent public company driving innovation at the forefront of precision technology. With a global footprint and a legacy of excellence, we empower engineers to bring next-generation breakthroughs to life — faster, smarter, and more reliably. Our high-performance instruments, sensors, and subsystems fuel mission-critical advancements across industries, enabling real-world impact where it matters most. At Ralliant we're building the future, together with those driven to push boundaries, solve complex problems, and leave a lasting mark on the world.

About Anderson-Negele

Anderson-Negele is an instrumentation company whose mission is to provide the best hygienic instrumentation solutions for processors of food, beverage and life sciences products. We have manufacturing facilities in the US and Germany and sales & service offices in the U.S., Europe, China, India, and Brazil.

We Are an Equal Opportunity Employer. Ralliant Corporation and all Ralliant Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Ralliant and all Ralliant Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at [email protected].

Bonus or Equity

This position is also eligible for bonus as part of the total compensation package.

Pay Range

83,400 to 155,000

How this job compares

Set against the 2,921 open Hardware Engineer jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This posting$83–155K/yr
  • US median$132–205K/yr2,259 salary ranges

This range's midpoint, $119K, is 30% below the US median midpoint ($171K) — in the lowest quarter of Hardware Engineer salary ranges across the US.

Openings
Olive Jobs lists 12 open Hardware Engineer jobs in South Carolina and 2,921 across the US. 1% of them nationwide are listed as remote or flexible.
Hiring the most across the US
Experience
This posting asks for at least 5 years of experience; Hardware Engineer postings that state a minimum ask for 5 years at the median (2,486 postings).
Education
This posting asks for a bachelor's degree; 1,545 of the 2,921 open Hardware Engineer jobs (53%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.