Skip to main content
American Battery Technology Company logo

Instrumentation and Controls Design Engineer

American Battery Technology Company

Reno, NVJob$110–140K/yrPosted 4mo agoStill listed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
$110–140K/yr
Location
Reno, NV
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Job overview

American Battery Technology Company seeks a Controls & Electrical Design Engineer to design, program, commission, and optimize industrial control systems for battery recycling and critical minerals processing facilities. The role works with engineering, operations, maintenance, vendors, and contractors on automation solutions, including PLC programming, control panel design, instrumentation, electrical documentation, commissioning, and process improvements. It reports to the Electrical, Controls & Automation Engineering Manager.

Skills & qualifications

RequiredNice to have

Skills

Process Engineering, nice to haveMySQL, nice to haveElectrical Design, nice to haveCommunication Protocols, nice to haveAutomation, nice to haveMaintenance, nice to haveEthernet, nice to haveIndustrial Automation, nice to have3D, nice to havePLC, nice to haveRevit, nice to haveEquity, nice to haveControl Engineering, nice to havePostgres, nice to haveContractors, nice to haveChemical Engineering, nice to haveControl Theory, nice to haveTCP/IP, nice to haveAutoCAD, nice to haveSupply Chain Management, nice to haveSCADA, nice to haveInstrumentation, nice to haveCommissioning, nice to haveTool Design, nice to haveBatteries, nice to haveMSSQL, nice to haveCommercialization, nice to haveMaterial Handling Equipment, nice to havePilot Plant, nice to haveIntrusion Detection System, nice to haveSQL, nice to haveTown Halls/Forums, nice to haveIndustrial Control System Design, requiredElectrical Controls Documentation, requiredControl Panel Design, requiredPLC Programming, requiredHMI Development, requiredSCADA Development, requiredControl Narratives, requiredVFD Configuration, requiredP&ID Interpretation, requiredElectrical Schematics, requiredIndustrial Networks, requiredTroubleshooting, requiredPLC Platforms, nice to haveIgnition, nice to haveSCADA/HMI Platforms, nice to haveAutoCAD Electrical, nice to haveAutoCAD Plant 3D, nice to haveIndustrial Communication Protocols, nice to haveSQL Databases, nice to haveControl Panel Fabrication, nice to haveFAT, nice to haveSAT, nice to haveLoop Checks, nice to haveElectrical Codes, nice to haveIndustrial Safety Standards, nice to haveHazardous Area Requirements, nice to haveMachine Safety, nice to haveCollaboration, required

Qualifications

Bachelor's in Electrical, Mechanical, Chemical, or Controls Engineering or Equivalent, required3+ Years Industrial Controls Experience, requiredIndustrial Environment Experience, required

Benefits

Medical Insurance
Dental Insurance
Vision Insurance
Parental Leave
401(k) Match
Paid Time Off

Full job description

American Battery Technology Company (ABTC) is an industry-leading battery metals and critical material technology development and commercialization company. Our Pilot Plant just outside of Reno, Nevada will be the first integrated implementation of our multi-step processing train for the full mechanical processing, physical separation, chemical extraction, and production of commercial-scale battery metals that will be resold back into the battery manufacturing supply chain to enact a low-cost, low environmental impact, and domestically sourced closed-loop circular economy. ABTC is seeking a Controls & Electrical Design Engineer to support the design, programming, commissioning, and optimization of industrial control systems for our battery recycling and critical minerals processing facilities. In this role, you will work closely with Operations, Process Engineering, Maintenance, vendors, and contractors to develop safe, reliable, and efficient automation solutions that support plant performance and growth. Responsibilities include PLC programming, control panel design, instrumentation, electrical documentation, system commissioning, and ongoing process improvements. The ideal candidate has experience in industrial automation and electrical controls, enjoys solving complex manufacturing challenges, and can effectively translate process requirements into practical control system designs from concept through startup. This position reports to the Electrical, Controls & Automation Engineering Manager.

Requirements

Controls Design & Documentation

  • Design industrial control systems for chemical process, mechanical, utility, and material handling systems.

  • Develop and maintain electrical controls documentation, including control panel schematics, wiring diagrams, I/O lists, loop diagrams, network diagrams, instrument lists, and equipment layouts.

  • Support control panel design, including PLC hardware selection, power distribution, terminal layouts, field wiring, networking, and enclosure design.

  • Review P&IDs, process descriptions, equipment packages, and vendor drawings to define instrumentation and control requirements.

  • Maintain drawing quality and ensure documentation accurately reflects installed systems.

PLC, HMI, and SCADA Support

  • Develop, modify, and troubleshoot PLC programs for industrial automation systems.

  • Support HMI and SCADA development, including equipment status displays, alarms, trends, interlocks, and operator controls.

  • Develop sequences of operation, control narratives, and functional descriptions that clearly define how equipment and systems should operate.

  • Support integration of PLCs, remote I/O, VFDs, instrumentation, safety systems, and plant network devices.

  • Assist with commissioning, testing, troubleshooting, and startup of new and modified control systems.

Instrumentation & Field Devices

  • Specify and apply industrial instrumentation, including pressure, level, flow, temperature, analytical, and discrete sensing devices.

  • Support selection and configuration of VFDs, motor starters, valves, actuators, solenoids, safety devices, and field-mounted control hardware.

  • Develop practical installation details for instruments, junction boxes, cable routing, terminations, and field wiring.

  • Support calibration, loop checks, functional testing, and field troubleshooting.

Project Execution & Coordination

  • Work with internal engineering, operations, maintenance, R&D, and construction teams to execute controls-related project scope.

  • Coordinate with vendors, integrators, panel shops, electricians, and contractors to ensure designs are installed correctly.

  • Review vendor and contractor submittals for technical accuracy and alignment with ABTC standards.

  • Identify design gaps, installation issues, and commissioning risks early, then drive practical solutions.

  • Support project schedules, material procurement, construction planning, and startup readiness.

Safety, Reliability & Continuous Improvement

  • Support hazard reviews, risk assessments, FMEAs, and control system safety reviews.

  • Ensure control strategies consider equipment protection, personnel safety, maintainability, and operational reliability.

  • Troubleshoot production issues and recommend improvements to controls, instrumentation, and electrical systems.

  • Help develop internal standards for control panels, PLC programming, instrumentation, electrical documentation, and commissioning practices.

  • Support maintenance and operations teams with technical training, documentation, and troubleshooting guidance.

Minimum Required Qualifications

  • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, Controls Engineering, or equivalent industrial automation experience.

  • 3+ years of experience in industrial controls, automation, electrical design, instrumentation, or PLC programming.

  • Experience designing or supporting industrial control systems in a manufacturing, chemical processing, mining, metals, energy, water/wastewater, or similar industrial environment.

  • Ability to read and develop electrical schematics, wiring diagrams, I/O lists, loop drawings, and control system documentation.

  • Working knowledge of PLCs, HMIs, VFDs, instrumentation, motor controls, control panels, and industrial networks.

  • Ability to interpret PFDs and P&IDs and translate process requirements into controls and electrical design requirements.

  • Strong troubleshooting skills and willingness to support field installation, commissioning, and startup activities.

  • Ability to collaborate effectively with engineering, operations, maintenance, vendors, and contractors.

Preferred Qualifications

  • Experience with PLC platforms such as Allen-Bradley, Siemens, or Codesys-based controllers.

  • Experience with Inductive Automation Ignition or other SCADA/HMI platforms.

  • Experience with AutoCAD Electrical, AutoCAD Plant 3D, Revit, or similar design tools.

  • Experience with industrial communication protocols such as Ethernet/IP, Modbus TCP, Profinet, IO-Link, or OPC UA.

  • Experience with SQL databases such as MSSQL, MySQL, or PostgreSQL.

  • Experience working hands-on in an operating manufacturing or chemical facility.

  • Experience supporting control panel fabrication, FAT, SAT, loop checks, and commissioning.

  • Familiarity with electrical codes, industrial safety standards, hazardous area requirements, or machine safety concepts.

Benefits

  • Competitive salary

  • Company-sponsored health, dental, vision, and life insurance

  • Parental Leave

  • Company-sponsored Employee Assistance Program

  • Stock options

  • 401(K)

  • Flexible paid time off

Expected Pay Range $110k - $140k per year. Compensation for this position may vary based on a number of individualized factors, including market location, job-related knowledge, skills, experience, and relevant education or training. The total compensation package may also include additional components such as bonus, equity, and benefits, which will be detailed upon offer of employment.

Equal Opportunity Employer American Battery Technology Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

Americans With Disabilities Act American Battery Technology Company does not discriminate based upon disability in its hiring or employment practices and complies with the ADA title I employment regulations. If you need assistance or an accommodation due to a disability or a special need, please contact Human Resources.

How this job compares

Set against the 2,094 open Controls Engineer jobs on Olive Jobs, counted November 17, 2026.

Pay
  • This posting$110–140K/yr
  • US median$107–160K/yr1,247 salary ranges

This range's midpoint, $125K, is 5% below the US median midpoint ($131K) — in the middle half of Controls Engineer salary ranges across the US.

Openings
Olive Jobs lists 20 open Controls Engineer jobs in Nevada and 2,094 across the US. 2% of them nationwide are listed as remote or flexible.
Hiring the most in Nevada
Experience
This posting asks for at least 3 years of experience; Controls Engineer postings that state a minimum ask for 5 years at the median (1,793 postings).
Education
1,049 of the 2,094 open Controls Engineer jobs (50%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 17, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.