
Electrical Walkdown/Turnover Subject Matter Expert (SME) (Data Center)
Austin, TXJobSeen todayIn the employer's feed · checked in the last 2 days
See where you stand before you apply. No sign-up to start.
You apply on the posting's application page, with no Olive account needed.
Watch jobs like this. New roles like this one near Austin, TX, by email.
Don't just apply. Show up ready.
Olive works from this exact posting.
At a glance
Olive focuses on jobs in the United States, including remote roles you can work from there.
Job overview
Jacobs seeks an Electrical Walkdown/Turnover SME for an onsite data center project in Saint Francisville, Louisiana. The role coordinates field verification and documentation of installed electrical systems, guides multidisciplinary teams through defined scopes, and verifies inspection, testing, and turnover records. The SME uses CxAlloy and may use Autodesk Construction Cloud to track punch items, review readiness, and assemble turnover packages aligned with field readiness and the P6 schedule.
Skills & qualifications
Skills
Qualifications
Full job description
Here at Jacobs, we apply our expertise and knowledge as we look into the future with great optimism and focus. We don’t settle until we give our best and know that we’re making a difference.
We're seeking to hire an Electrical Walkdown/Turnover SME for an onsite role at our data center project in Saint Francisville, LA.
As an Electrical Walkdown/Turnover Subject Matter Expert, you will be responsible for coordinating and facilitating the field verification and documentation of electrical systems and equipment installed by Construction.
This will be achieved through technical leadership of electrical walkdown activities on an active construction site. You will guide construction, electrical subcontractor, field Quality, Turnover, CQV, and client personnel through defined system, subsystem, partial-system, and equipment scopes.
You will actively collaborate with field quality and electrical subcontractors to verify adherence to applicable inspection, testing, and turnover-documentation requirements. This includes confirming that required pre-commissioning activities have been performed and that supporting records are available for insulation-resistance testing, continuity testing, grounding and bonding verification, torque verification, cable testing, phase rotation, and voltage verification.
The role does not independently perform, approve, or certify electrical testing unless specifically authorized and qualified to do so. Its primary responsibility is to verify that the required work and supporting documentation are complete, traceable, and suitable for turnover progression.
You will use CxAlloy for punch-list entry and tracking, readiness reviews, test-record visibility, walkdown documentation, and assembly of electrical construction turnover packages. You may also use Autodesk Construction Cloud to review applicable drawings, submittals, RFIs, field records, and quality documentation.
In coordination with Project Controls, Construction, Quality, Turnover, Startup, and CQV, you will help provide a planned and documented approach for the final turnover of electrical facilities, systems, and equipment in alignment with the P6 schedule and verified field readiness.
Key Responsibilities
-
Lead and facilitate electrical walkdowns with Construction, subcontractors, Quality, Turnover, CQV, and client representatives.
-
Serve as the primary electrical technical resource for walkdown preparation, field verification, punch development, and turnover-package review.
-
Confirm that walkdown scope is clearly defined by system, subsystem, equipment, area, and applicable boundary.
-
Participate with Construction and CQV in establishing logical electrical system and partial-system boundaries that support timely installation, construction completion, turnover, startup, and commissioning.
-
Read and interpret single-line diagrams, wiring and connection diagrams, electrical schematics, cable schedules, panel schedules, equipment layouts, grounding drawings, control diagrams, and vendor drawings.
-
Verify installed electrical work against approved drawings, project specifications, applicable checklists, and defined turnover scope.
-
Confirm that equipment and asset tags are installed, legible, and aligned with applicable drawings and turnover records.
-
Review the availability and traceability of megger and insulation-resistance records, continuity and point-to-point records, grounding and bonding records, torque and termination records, cable test records, breaker test records, transformer inspection and test records, phase-rotation records, and voltage-verification records.
-
Identify incomplete construction, missing documentation, incorrect installation, accessibility concerns, labeling deficiencies, and turnover-boundary discrepancies.
-
Document field conditions accurately and objectively without assuming responsibility for contractor correction or construction completion.
-
Enter and track electrical punch-list items in CxAlloy using clear descriptions of the exact location, equipment or system, observed condition, and required correction.
-
Coordinate with Construction and field Quality regarding issues identified during electrical walkdowns; support assignment of punch ownership and target dates.
-
Review submitted punch-closure evidence and coordinate reinspection when required while preserving applicable Quality, commissioning, and client acceptance requirements.
-
Review electrical turnover packages for completeness, organization, traceability, and alignment with the defined scope, including applicable drawings, inspection records, test records, checklists, certificates, punch status, and supporting documentation.
-
Coordinate electrical readiness forecasts with the P6 schedule and identify milestone dates not supported by verified field or documentation readiness.
-
Participate in turnover planning, readiness reviews, construction-completion discussions, and construction-to-CQV handoff activities.
-
Promote a professional, collaborative, and problem-solving culture and support continuous improvement of electrical walkdown checklists and documentation practices.
-
Bachelor's degree in Electrical Engineering, Construction Management, or a related field, or equivalent relevant experience in lieu of a degree.
-
At least 5 years of electrical construction, Quality, commissioning, startup, or turnover experience, including at least 2 years focused on electrical systems turnover, walkdowns, or systems completion.
-
Experience on data center, pharmaceutical, semiconductor, industrial, power, utility, or other major capital projects.
-
Ability to lead electrical walkdowns with subcontractors, Quality personnel, CQV representatives, and clients.
-
Ability to read and interpret electrical construction drawings and vendor documentation.
-
Knowledge of electrical installation, inspection, testing, and turnover-documentation requirements.
-
Understanding of systems-based scoping, electrical turnover-package assembly, LOTO processes, and electrical safe-work requirements.
-
Strong organization, issue tracking, communication, and collaboration skills.
-
Ability to spend continuous hours on an active construction site, including wearing PPE, traversing stairs, walking through construction areas, and participating in standing field meetings.
-
Ability to remain onsite for the duration of the assignment.
Ideally, You'll Also Have
-
Experience with CxAlloy and Autodesk Construction Cloud.
-
Familiarity with Good Documentation Practices and P6 turnover milestone planning.
-
Experience with medium-voltage equipment, transformers, switchgear, UPS systems, generators, busway, grounding systems, or data-center electrical distribution.
-
OSHA 30
-
Familiarity with NFPA 70, NFPA 70E, and applicable NETA testing practices.
-
Experience reviewing electrical turnover packages and punch-list closure evidence.
#LI-LE1
Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.
Prepare for this role
You've read the whole posting — now see how you match it.



