Skip to main content
True Anomaly logo

Electrical Engineer (Senior/Staff), Avionics

True Anomaly

CAJob$135–250K/yrPosted todayStill listed today

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
$135–250K/yr
Location
CA
Work Authorization
Work authorization required

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

TS/SCI clearance, requiredBachelor's degree, required

Job overview

True Anomaly seeks an experienced Electrical Engineer to develop system-level electrical architectures for next-generation spacecraft. The role spans reliability analysis, component selection, avionics hardware design, electrical interfaces, verification, and integration, translating mission requirements into solutions for spaceflight performance, reliability, and mass constraints. The position is onsite at either the Centennial, Colorado or Long Beach, California location, with occasional travel as needed.

Skills & qualifications

RequiredNice to have

Skills

Electrical Engineering, nice to haveCircuit Design, nice to havePower Engineering, nice to haveElectrical System Design, nice to haveReliability Testing, nice to haveFailure Mode and Effects Analysis, nice to haveElectrical CAD, nice to haveRemote Debugging, nice to haveTechnical Documentation, nice to haveSystems Engineering, nice to havePower Electronics, requiredElectrical Architecture, requiredReliability Analysis, requiredFMEA, requiredFault Tree Analysis, requiredArchitecture Diagrams, requiredComponent Selection, requiredPCB Layout, requiredCircuit Simulation, requiredSPICE, requiredPower Budget Analysis, requiredWorst-Case Analysis, requiredHardware Debugging, requiredTest Equipment, requiredAerospace Electrical Standards, requiredWire Derating, requiredConnector Selection, requiredEMI/EMC Design, requiredAnalytical Skills, requiredProblem-Solving, requiredAttention to Detail, requiredCommunication, requiredSpacecraft Electrical Systems, nice to haveSpace-Grade Components, nice to haveRadiation Effects, nice to haveQualification Testing, nice to haveHigh-Voltage Systems, nice to haveBattery Management, nice to haveSolar Array Design, nice to haveSpacecraft Communication Protocols, nice to haveMATLAB, nice to havePython, nice to haveElectrical System Modeling, nice to haveFPGA Interfaces, nice to haveEmbedded Processor Interfaces, nice to haveDigital Logic Design, nice to haveNASA Standards, nice to have

Qualifications

Bachelor's in Electrical Engineering or Related Field, required5+ Years Professional Experience, requiredMaster's in Electrical Engineering or Related Discipline, nice to haveTS//SCI Clearance, requiredAbility to Lift 35 Lbs, requiredU.S. Citizen or Permanent Resident or Protected Individual or Eligible for Authorization, required

Benefits

Medical Insurance
Dental Insurance
Vision Insurance
Paid Time Off
Parental Leave
401(k) Match

Full job description

Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it. OUR MISSION True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft, advanced payloads, mission software, and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground. OUR VALUES

  • Be the offset. We create asymmetric advantages with creativity and ingenuity.
  • What would it take? We challenge assumptions to deliver ambitious results.
  • It’s the people. Our team is our competitive advantage and we are better together.

BENEFITS & PERKS*

  • Best-in-class healthcare: 100% company-paid medical, dental, and vision coverage for you and your dependents, with HSA/HRA options
  • Generous time off: Flexible Time Off (FTO) for exempt employees, accrued PTO of up to 25 days for non-exempt employees, plus 12 paid holidays; Parental Leave; Sick Leave
  • Fuel for your day: Daily catered lunch and unlimited snacks for in-office employees
  • And more: 401(k) retirement plan, fitness reimbursement, and Dog Fridays
  • Equity participation: Equity is included as part of our total compensation package, giving you an opportunity to share in the company’s success.

*Do not apply to fixed term and temporary roles

YOUR MISSION True Anomaly is seeking an experienced Electrical Engineer to design and develop electrical system architectures for our next-generation space vehicles. You will be responsible for defining system-level electrical architectures, performing system reliability analysis, and ensuring seamless integration of power, data, and control systems across the spacecraft. Working at the intersection of hardware design and systems engineering, you will translate mission requirements into robust electrical system solutions that meet performance, reliability, and mass constraints for space flight operations. This role emphasizes systems-level thinking — understanding how electrical subsystems interact and ensuring the overall architecture meets mission needs. RESPONSIBILITIES

  • Develop electrical system architectures and block diagrams for spacecraft avionics, including power distribution networks, grounding schemes, and signal routing topologies
  • Create and maintain system-level block diagrams, functional flow diagrams, and architecture documentation to communicate design intent across engineering teams
  • Conduct Failure Mode and Effects Analysis (FMEA) for electrical systems to identify potential failure modes, assess risk, and drive design improvements
  • Review and evaluate electrical components, parts, and COTS products to ensure they meet mission requirements, reliability standards, and environmental specifications
  • Perform component selection and qualification planning including evaluation of radiation tolerance, temperature range, voltage margins, and derating requirements
  • Develop electrical interface requirements and specifications for avionics components including flight computers, sensors, actuators, and communication systems
  • Perform electrical system analysis including power budgets, voltage drop calculations, fault analysis, and load flow studies to ensure system performance and reliability
  • Design custom avionics hardware including power conditioning units, motor controllers, sensor interface boards, and data acquisition systems for space applications
  • Create detailed electrical schematics, BOMs, and design documentation using industry-standard CAD tools (Altium, OrCAD, or similar)
  • Conduct worst-case circuit analysis, derating studies, and reliability assessments to ensure designs meet space qualification requirements
  • Define and manage electrical interfaces between subsystems including mechanical mounting, thermal management, and electromagnetic compatibility
  • Develop and execute test plans for electrical system verification including functional testing, environmental qualification, and EMI/EMC testing
  • Support hardware bring-up, debugging, and troubleshooting using lab equipment (oscilloscopes, power supplies, multimeters, logic analyzers)
  • Collaborate with harness design teams to define cable routing, connector specifications, and wire gauge requirements
  • Perform trade studies on component selection, architecture alternatives, and design approaches to optimize system performance, reliability, and cost
  • Support integration and test activities including spacecraft-level electrical checkout, continuity testing, and flight readiness verification
  • Participate in design reviews (SRR, PDR, CDR) presenting electrical architecture, block diagrams, FMEA results, analysis, and verification status
  • Create and maintain electrical system documentation including ICDs, architecture diagrams, test procedures, analysis reports, and as-built drawings

QUALIFICATIONS

  • Bachelor's degree in Electrical Engineering or related technical field
  • 5–10 years of professional experience in electrical system design, preferably in aerospace, defense, or high-reliability applications
  • Strong fundamentals in circuit design, power electronics, and electrical system architecture
  • Experience conducting system-level reliability analysis including FMEA, fault tree analysis, or similar methodologies
  • Proficiency creating system architecture diagrams, block diagrams, and technical documentation using tools such as Visio, Lucidchart, or similar
  • Demonstrated ability to evaluate and select electrical components based on mission requirements, environmental specifications, and reliability criteria
  • Proficiency with electrical CAD tools for schematic capture and PCB layout (Altium, OrCAD, EAGLE, or similar)
  • Experience with electrical analysis including circuit simulation (SPICE), power budget analysis, and worst-case analysis
  • Hands-on experience with hardware debugging and test equipment (oscilloscopes, multimeters, power supplies, signal generators)
  • Understanding of aerospace electrical standards including wire derating, connector selection, and EMI/EMC design practices
  • Strong analytical and problem-solving skills with attention to detail in design and documentation
  • Excellent communication skills with ability to present technical concepts to multidisciplinary teams

PREFERRED SKILLS AND EXPERIENCE

  • Master's degree in Electrical Engineering or related discipline
  • Experience with spacecraft electrical systems including EPS, flight computers, motor control, or sensor systems
  • Familiarity with space-grade components, radiation effects, and qualification testing (vibration, thermal-vacuum, life testing)
  • Experience with high-voltage systems, battery management, or solar array design
  • Knowledge of digital communication protocols used in spacecraft (CAN, SpaceWire, MIL-STD-1553, RS-422, SPI, I2C)
  • Experience with MATLAB, Python, or similar tools for electrical system modeling and analysis
  • Understanding of FPGA or embedded processor interfaces and digital logic design
  • Familiarity with NASA or MIL standards (NASA-STD-8739, MIL-STD-461, MIL-STD-1540) and aerospace quality practices
  • Experience with requirements management and systems engineering processes
  • Background in signal integrity, power integrity, or high-speed digital design
  • Experience working with government or defense customers on space or launch vehicle programs

PHYSICAL DEMANDS This position is based at our primary development facility and involves both office-based design work and hands-on lab activities. Work includes extended periods at a computer workstation for design and analysis, as well as time in the lab and cleanroom environments for hardware testing and integration. Physical requirements include the ability to lift equipment up to 35 lbs, bend and reach during hardware assembly and testing, and operate hand tools and test equipment. Occasional travel to supplier facilities, test sites, or launch operations may be required. Work schedule may include extended hours during critical hardware delivery and test campaigns. COMPENSATION

  • Base Salary: $135,000-$250,000
  • Equity + Benefits including Health, Dental, Vision, HRA/HSA options, PTO and paid holidays, 401K, Parental Leave

Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, location, and experience. ADDITIONAL REQUIREMENTS

  • Ability to maintain or obtain TS//SCI clearance
  • Work Location—this role will be onsite at either our Centennial, CO or Long Beach, CA locations, with travel to other sites as needed.
  • Work environment—the work environment; temperature, noise level, inside or outside, or other factors that will affect the person's working conditions while performing the job.
  • Physical demands—the physical demands of the job, including bending, sitting, lifting and driving.

This position will be open until it is successfully filled. To submit your application, please follow the directions below. #LI-Onsite To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation, please do not hesitate to let us know. To protect candidates and our company from application fraud and impersonation, we use third-party tools to verify applicant identity and detect fraudulent applications. Learn more in our Privacy Notice.

How this job compares

Set against the 9,420 open Electrical Engineer jobs on Olive Jobs, counted November 16, 2026.

Pay
  • This posting$135–250K/yr
  • California median$129–186K/yr1,027 salary ranges
  • US median$105–165K/yr6,405 salary ranges

This range's midpoint, $193K, is 21% above the California median midpoint ($160K) — in the top quarter of Electrical Engineer salary ranges in California.

Openings
Olive Jobs lists 1,271 open Electrical Engineer jobs in California and 9,420 across the US. 3% of them nationwide are listed as remote or flexible.
Hiring the most in California
Experience
This posting asks for at least 5 years of experience; Electrical Engineer postings that state a minimum ask for 5 years at the median (7,949 postings).
Education
This posting asks for a bachelor's degree; 6,017 of the 9,420 open Electrical Engineer jobs (64%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 16, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.