Skip to main content
Jacobs logo

I&C Walkdown/Turnover Subject Matter Expert (SME) (Data Center)

Jacobs

Dulles, VAJobSeen todayIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
No compensation found
Location
Dulles, VA
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Job overview

Jacobs seeks an I&C Walkdown/Turnover Subject Matter Expert for an onsite data center construction project in Saint Francisville, Louisiana. The role leads field verification, punch-list development, interface review, and turnover-package readiness for instrumentation, controls, automation, monitoring, and interface systems. The SME coordinates with construction, quality, startup, CQV, system integrators, and clients, using CxAlloy and aligning turnover readiness with project schedules and startup dependencies.

Skills & qualifications

RequiredNice to have

Skills

I&C Walkdown Leadership, requiredP&ID Interpretation, requiredLoop Diagram Interpretation, requiredI/O List Interpretation, requiredWiring Diagram Interpretation, requiredControl Schematics, requiredNetwork Drawing Interpretation, requiredControl Narratives, requiredCause-and-Effect Matrices, requiredInstrumentation Installation, requiredCalibration, requiredLoop Checks, requiredControls Testing, requiredInterface Management, requiredSystems-Based Scoping, requiredTurnover Package Assembly, requiredTroubleshooting, requiredIssue Tracking, requiredOrganization, requiredCommunication, requiredCross-Discipline Coordination, requiredCxAlloy, nice to haveAutodesk Construction Cloud, nice to haveGood Documentation Practices, nice to haveP6 Turnover Milestone Planning, nice to havePLC, nice to haveSCADA, nice to haveBMS, nice to haveEPMS, nice to haveDCS, nice to haveFire-Alarm Systems, nice to haveSecurity Systems, nice to haveData-Center Monitoring Systems, nice to haveBACnet, nice to haveModbus, nice to haveEthernet/IP, nice to haveISA Practices, nice to haveTurnover Package Review, nice to havePunch-List Closure Review, nice to haveActive Construction Site Work, required

Qualifications

Bachelor's in Electrical Engineering or Related, nice to have5+ Years Relevant Experience, required2+ Years I&C Walkdown or Turnover Experience, requiredData Center or Major Capital Project Experience, requiredOSHA 30, nice to have

Full job description

Here at Jacobs, we apply our expertise and knowledge as we look into the future with great optimism and focus. We don’t settle until we give our best and know that we’re making a difference.

We're seeking to hire an I&C Walkdown/Turnover SME for an onsite role at our data center project in Saint Francisville, LA.

As an Instrumentation and Controls Walkdown/Turnover Subject Matter Expert, you will be responsible for coordinating and facilitating the field verification and documentation of instrumentation, controls, automation, monitoring, and interface systems installed by Construction.

You will provide technical leadership during I&C walkdowns on an active construction site, guiding construction, subcontractor, system-integrator, field Quality, Turnover, Startup, CQV, and client personnel through defined system, partial-system, panel, loop, device, network, and equipment scopes.

You will collaborate with field Quality and applicable subcontractors to verify adherence to installation, calibration, testing, and turnover-documentation requirements. This includes confirming that applicable calibration, continuity, point-to-point, loop-check, I/O verification, communication, alarm, and interlock records are available and traceable.

The position verifies completion and documentation readiness but does not independently modify software, approve control logic, perform commissioning acceptance, or assume responsibility for system-integrator deliverables unless formally authorized.

You will use CxAlloy for I&C punch-list entry and tracking, testing-status visibility, walkdown documentation, interface management, and assembly of I&C construction turnover packages.

In coordination with Project Controls, Construction, Electrical, Mechanical, Startup, and CQV, you will help provide a planned and documented approach for I&C turnover in accordance with the P6 schedule and applicable system-startup dependencies.

Key Responsibilities

  • Lead and facilitate I&C walkdowns with Construction, subcontractors, system integrators, Quality, Turnover, Startup, CQV, and client representatives.

  • Serve as the primary I&C technical resource for walkdown preparation, field verification, punch development, interface review, and turnover-package review.

  • Confirm that each walkdown has a clearly defined system, subsystem, loop, panel, device, network, equipment, or interface boundary.

  • Participate with Construction and CQV in establishing logical I&C boundaries that support timely installation, testing, startup, commissioning, and turnover.

  • Read and interpret P&IDs, instrument indexes, I/O lists, loop diagrams, wiring and termination diagrams, control schematics, panel layouts, network architecture drawings, cause-and-effect matrices, control narratives, alarm and interlock lists, and vendor drawings.

  • Verify installation completeness of field instruments, sensors, transmitters, switches, actuators, control panels, junction boxes, instrument tubing, control cabling, communication cabling, and associated field interfaces.

  • Confirm that instrument, panel, cable, loop, and equipment tags are installed, legible, and consistent with applicable drawings and turnover records.

  • Review the availability and traceability of calibration records, cable continuity records, point-to-point records, loop-check records, I/O verification records, alarm and interlock tests, communication tests, device-address records, panel inspection and power-up records, and vendor test documentation.

  • Verify consistency among instrument tags, I/O assignments, loop numbers, drawings, equipment interfaces, and turnover documentation.

  • Identify incomplete installation, missing calibration records, incorrect tagging, inaccessible devices, interface discrepancies, labeling deficiencies, and documentation gaps.

  • Enter and track I&C punch-list items in CxAlloy using clear descriptions of the exact device, loop, panel, system, location, observed condition, and required correction.

  • Coordinate with Construction, field Quality, Electrical, Mechanical, vendors, and system integrators and help establish responsibility for cross-discipline interface issues.

  • Review submitted punch-closure evidence and coordinate reinspection when required.

  • Review I&C turnover packages for completeness, organization, traceability, and alignment with the defined scope, including drawings, indexes, calibration records, loop records, I/O records, test documentation, vendor information, and punch status.

  • Coordinate I&C readiness forecasts with P6 activities, equipment-power availability, mechanical completion, network availability, and system-startup dependencies.

  • Identify missing prerequisites that could prevent loop checks, controls checkout, equipment startup, functional testing, or construction-to-CQV handoff.

  • Participate in I&C readiness reviews, turnover planning, interface meetings, construction-completion discussions, and handoff activities.

  • Promote a collaborative, documented, and solutions-focused working relationship among project participants.

  • Bachelor's degree in Electrical Engineering, Controls Engineering, Instrumentation Engineering, Automation Engineering, or a related field, or equivalent relevant experience in lieu of a degree.

  • At least 5 years of instrumentation, controls, automation, Quality, commissioning, startup, or turnover experience, including at least 2 years focused on I&C walkdowns, systems completion, or turnover.

  • Experience on data center, pharmaceutical, semiconductor, industrial, process, utility, power, or other major capital projects.

  • Ability to lead I&C walkdowns with subcontractors, system integrators, Quality personnel, CQV representatives, and clients.

  • Ability to read and interpret P&IDs, loop diagrams, I/O lists, wiring diagrams, control schematics, network drawings, control narratives, and cause-and-effect matrices.

  • Knowledge of instrumentation installation, calibration, loop checks, controls testing, interface management, systems-based scoping, and turnover-package assembly.

  • Strong troubleshooting, issue tracking, organization, communication, and cross-discipline coordination skills.

  • Ability to spend continuous hours on an active construction site and remain onsite for the duration of the assignment.

Ideally, You'll Also Have

  • Experience with CxAlloy and Autodesk Construction Cloud.

  • Familiarity with Good Documentation Practices and P6 turnover milestone planning.

  • Experience with PLC, SCADA, BMS, EPMS, DCS, fire-alarm, security, or data-center monitoring systems.

  • Familiarity with BACnet, Modbus, Ethernet/IP, or similar communication protocols and working knowledge of ISA practices.

  • OSHA 30

  • Experience reviewing I&C turnover packages and punch-list closure evidence.

#LI-LE1

Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

How this job compares

Set against the 2,067 open Construction jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This postingNot listed
  • Virginia median$78–130K/yr35 salary ranges
  • Virginia median$29–36/hr22 hourly ranges
Openings
Olive Jobs lists 82 open Construction jobs in Virginia and 2,067 across the US. 1% of them nationwide are listed as remote or flexible.
Hiring the most in Virginia
Experience
This posting asks for at least 5 years of experience; Construction postings that state a minimum ask for 5 years at the median (1,557 postings).
Education
565 of the 2,067 open Construction jobs (27%) ask for a bachelor's degree or higher.

Pay, requirements and demand for Construction jobs

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.