Skip to main content

Optical Engineer

Qcells

Cartersville, GAJobPosted 1w agoStill listed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
No compensation found
Location
Cartersville, GA
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Bachelor's degree, required

Job overview

The Optical Engineer designs, installs, and owns vision-inspection optics across Qcells’ solar manufacturing lines, with an initial focus on specifying and commissioning illumination, lenses, and cameras for defect detection. The role also develops the surrounding vision application and operator viewer, measures inspection performance, and works with AI, process, and equipment engineering. Dedicated AI engineers develop the deep-learning detection models.

Skills & qualifications

RequiredNice to have

Skills

Optical Engineering, nice to haveMachine Vision, nice to haveC# (Programming Language), nice to haveC++ (Programming Language), nice to havePython (Programming Language), nice to haveDeep Learning, nice to haveSoftware Development, nice to haveOptical Design, requiredIllumination Selection, requiredLens Selection, requiredCamera Selection, requiredInspection System Commissioning, requiredSupplier Requirements, requiredInspection Performance Measurement, requiredThreshold Setting, requiredHigh-Volume Inspection, nice to haveElectroluminescence Inspection, nice to have3D Metrology, nice to haveMeasurement Systems Analysis, nice to haveOptical Simulation, nice to haveZemax, nice to haveHalcon, nice to haveCognex VisionPro, nice to haveOpenCV, nice to haveGigE Vision, nice to haveUSB3 Vision, nice to haveGenICam, nice to haveTCP/IP, nice to haveHTTP/REST, nice to havegRPC, nice to haveGUI Development, nice to haveWinForms, nice to haveWPF, nice to haveQt, nice to havePLC Integration, nice to haveMES Integration, nice to haveCollaboration, required

Qualifications

Bachelor's in Optical Engineering or Related, required3+ Years Relevant Experience, required

Full job description

Optical Engineer

Location: Cartersville, GA, United States

Share:

Apply Now

Save Job Saved

Description Optical Engineer Title: Optical Engineer Location: Cartersville, GA (Qcells Cartersville Factory) Department: Smart Intelligence Team The Optical Engineer will design, install, and own the optics of every vision inspection across Qcells’ solar manufacturing line, spanning ingot, wafer, cell, and module processes at the Cartersville (CTV) and Dalton (DLT) plants. The first assignment is optical design and installation: specifying illumination, lens, and camera for each defect type, building the setup on the line, and proving that it reveals what it is meant to reveal. Detection performance is set by the optics before any algorithm sees the image. The role also builds the software that runs around the optics, including camera control and image acquisition, the interface to the AI inference server, and the on-floor viewer used by operators and engineers. Deep learning detection models are developed by dedicated AI engineers on the same team, so this role owns the optics, the application around them, and the measurement of inspection performance rather than model development. Responsibilities

  • Design inspection optics for each defect type, covering illumination (wavelength, angle, uniformity), lens, field of view, resolution, and camera or sensor selection, and finalize installation specifications with mechanical and controls engineering
  • Install and commission inspection systems on the production line, including mounting, alignment, focus and lighting setup, and acceptance criteria for image quality
  • Lead proof-of-concept evaluation of new inspection capability, including vendor technical assessment, bench trial design, detection-limit measurement, and production readiness decisions
  • Own optical specifications for new inspection lines from the ground up, including vendor selection, incoming acceptance testing, and commissioning
  • Quantify and track inspection performance in production (over-kill rate, miss rate, and detection coverage), and design the evaluation sample set and labels required to measure them, including known-good labels
  • Set and maintain detection thresholds and judgment criteria together with process and quality engineering
  • Monitor and correct image quality on equipment already in production: focus and brightness drift, field-of-view alignment, tool-to-tool variation, and line-to-line standardization
  • Determine root-cause attribution when over-kill or miss rates rise, separating optical, process, and model causes, working with AI, process, and equipment engineering
  • Develop the vision application that runs around the optics, covering camera control, triggering, image acquisition and preprocessing, and the interface to the AI inference server at line speed
  • Build and maintain the on-floor viewer used by operators and engineers, covering live inspection images and results, defect review and re-judgment, lookup of past inspections by product or tool, and threshold configuration
  • Support inspection across EL, front-end and back-end AOI, string and solder joint inspection, final visual inspection, wafer surface and saw-mark inspection, and real-time image metrology on crystal growth, spanning visible, near-infrared, and laser-based measurement

Required Qualifications

  • Bachelor’s degree in Optical Engineering, Optical Sciences, Photonics, Imaging Science, Applied Physics, or Electrical Engineering with an optics or imaging emphasis
  • 3+ years of relevant experience
  • Professional experience in machine vision optical design, covering selection and validation of illumination, lenses, and cameras for defect inspection
  • Hands-on experience installing, aligning, and commissioning inspection systems on a production line, and sustaining them afterward
  • Experience specifying requirements and working directly with industrial camera and illumination suppliers
  • Demonstrated experience quantifying inspection performance, including over-kill and miss rates, threshold setting, and before-and-after verification of changes
  • Working proficiency in C#, C++, or Python, sufficient to build and modify vision applications and operator screens
  • Ability to collaborate effectively with colleagues, customers, suppliers, and stakeholders from different technical backgrounds

Preferred Qualifications

  • High-volume inspection experience in semiconductor, display, or solar manufacturing
  • Electroluminescence (EL) inspection experience
  • 3D metrology experience such as laser triangulation, structured light, or confocal measurement
  • Measurement systems analysis (Gage R&R) or inspection capability studies
  • Experience with optical design and simulation tools such as Zemax
  • Hands-on use of machine vision SDKs (Halcon, Cognex VisionPro, OpenCV) and camera interface standards (GigE Vision, USB3 Vision, GenICam)
  • Experience integrating vision systems with external systems over network protocols (TCP/IP, HTTP/REST, or gRPC)
  • Experience developing operator-facing GUI applications (WinForms/WPF or Qt)
  • Experience interfacing vision systems with manufacturing equipment, PLC, or MES

Hanwha Qcells provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics.

Share:

Apply Now

How this job compares

Set against the 371 open Optical Engineer jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This postingNot listed
  • US median$115–196K/yr328 salary ranges
Openings
Olive Jobs lists 371 open Optical Engineer jobs across the US. Under 1% of them nationwide are listed as remote or flexible.
Hiring the most across the US
Experience
This posting asks for at least 3 years of experience; Optical Engineer postings that state a minimum ask for 5 years at the median (326 postings).
Education
This posting asks for a bachelor's degree; 217 of the 371 open Optical Engineer jobs (58%) ask for a bachelor's degree or higher.

Pay, requirements and demand for Software Engineer jobs

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.