Skip to main content
SpaceX logo

Senior Manufacturing Engineer, Injection Molding (Starlink)

SpaceX

Bastrop, TXJobPosted 1 day agoStill listed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
No compensation found
Location
Bastrop, TX
Work Authorization
Citizenship required

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Bachelor's degree, required

Job overview

SpaceX is seeking a Senior Manufacturing Engineer to sustain existing plastic injection molding production lines and ramp new lines to full-scale production for Starlink devices. The role develops and optimizes molding processes, implements high-volume production processes, improves material flow and safety, and works with design and test engineers on manufacturability. It also identifies automation opportunities and supports production-line technical issues.

Skills & qualifications

RequiredNice to have

Skills

Research, nice to haveMRP, nice to haveExperimental Design, nice to haveNX, nice to haveAutomation, nice to havePhysics, nice to haveInjection Molding, nice to haveSPC, nice to haveERP, nice to havePlastic Injection Molding, nice to haveTooling Design, nice to haveSupplier Development, nice to haveContract Manufacturing, nice to haveDesign of Experiments, nice to haveGauge R&R, nice to haveProcess Qualification, nice to haveStatistical Process Control, nice to haveTeamcenter, nice to haveMES, nice to have

Qualifications

Engineering or Physics Degree, required5+ Years Manufacturing Experience, requiredAdvanced Engineering Degree, nice to haveExtended Hours and Weekends, requiredTravel Up to 10%, requiredUS Citizen or Permanent Resident or Refugee or Asylee or Eligible for Export Authorization, required

Full job description

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

SENIOR MANUFACTURING ENGINEER, INJECTION MOLDING (STARLINK)

At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the world.

As a Manufacturing Engineer at SpaceX you will have the opportunity to utilize your knowledge, experience and creativity to develop novel solutions at the cutting edge of technology. We are looking for a talented engineer to sustain our current plastic injection molding production lines and help ramp our new lines to full scale production for millions of devices that will sit in our customers’ homes.

RESPONSIBILITIES:

  • Responsible for development of plastic injection molding manufacturing processes for Starlink hardware

  • Responsible for the development of the injection molding process through parameter optimization, DOE experiments, and trials that will lead to a robust process

  • Responsible for implementing plug-and-play processes to production that are capable of high volume throughput (1M+ per year)

  • Take direct ownership of the physical production layout, optimizing for material flow from material receiving through processes on the line

  • Identify and implement safety improvement projects

  • Manage strategy for production line tooling, inventory, training, and build process and ensure all are updated according to the latest design configuration

  • Drive design for test (DFT) best practices and design for manufacturing (DFM) with design engineers and test engineers

  • Identify automation opportunities and establish requirements as well as evaluating return on investment for each

  • Work with in-house resources or vendors as necessary to develop these solutions and implement on production line

  • Support production line with technical issues that cannot be addressed immediately on the line

BASIC QUALIFICATIONS:

  • Bachelor's degree in an engineering discipline or physics

  • 5+ years of experience in a manufacturing environment via professional work experience, project/research-based student experience, or a combination of both

PREFERRED SKILLS AND EXPERIENCE:

  • Advanced degree in an engineering discipline

  • Direct experience with plastic injection molding

  • Ability to design tooling for high volume manufacturing

  • Ability to develop and maintain high performing suppliers and contract manufacturers

  • Experience working in a highly adaptive and iterative environment

  • Experience implementing automation into production processes

  • Experience transitioning products from design to manufacturing and scaling to high volume as part of a cross-functional team

  • Experience with design of experiments, gauge repeatability and reproducibility, and process qualifications

  • Experience defining production data requirements and statistical process control

  • Experience with NX and Teamcenter

  • Experience working with and defining requirements for ERP, MRP, and MES systems

ADDITIONAL REQUIREMENTS:

  • Must be willing and able to work extended hours and/or weekends with minimal notification as needed

  • Able to travel for business trips up to 10% on an ongoing basis

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to [email protected].

How this job compares

Set against the 4,891 open Manufacturing Engineer jobs on Olive Jobs, counted November 17, 2026.

Pay
  • This postingNot listed
  • Texas median$85–132K/yr159 salary ranges
  • US median$40–50/hr309 hourly ranges
Openings
Olive Jobs lists 429 open Manufacturing Engineer jobs in Texas and 4,891 across the US. Under 1% of them nationwide are listed as remote or flexible.
Hiring the most in Texas
Experience
This posting asks for at least 5 years of experience; Manufacturing Engineer postings that state a minimum ask for 3 years at the median (3,932 postings).
Education
This posting asks for a bachelor's degree; 2,775 of the 4,891 open Manufacturing Engineer jobs (57%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 17, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.