Skip to main content
M. C. Dean logo

Tech Specialist 3 (BMS and EMCS)

M. C. Dean

Vienna, VA · HybridJob$104–130K/yrPosted 6mo agoIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
$104–130K/yr
Location
Vienna, VAHybrid
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Minimum Of One BMS Or Automation Platform Certification, requiredBachelor's degree, required

Job overview

M. C. Dean is hiring a Tech Specialist 3 (BMS and EMCS). The Technical Specialist 3 (BMS & EMCS) provides senior-level technical support for the startup, commissioning, integration, and troubleshooting of Building Management Systems (BMS), Electrical Monitoring and Control Systems (EMCS), and Electrical Power Monitoring Systems (EPMS). This role operates on active project sites and at M.C. Dean facilities, executing and leading L3 startup, L4 functional commissioning, and L5 Integrated Systems Testing (IST) activities. The TS-3 works with a high level of independence and serves as a technical resource to TS-1 and TS-2 personnel.

Key focus areas include Lead and execute delivery of BMS, EMCS, and EPMS systems, Perform and oversee L3 startup activities, and Execute and support L4 functional commissioning and L5 Integrated Systems Testing (IST).

Successful candidates bring 5+ Years BMS, EMCS, And/Or EPMS Project Startup And Commissioning Experience, 5+ Years High-Level System Configuration, Integration, And Advanced Troubleshooting Experience, and Travel Within VA, DC, MD, And Other U.S. Project Locations. Important skills include BMS, EMCS, EPMS, Startup, Integration, and Testing.

Skills & qualifications

RequiredNice to have

Skills

BMS, requiredEMCS, requiredEPMS, requiredStartup, requiredIntegration, requiredTesting, requiredCommissioning, requiredAdvanced Troubleshooting, requiredControls Configuration, requiredNetwork Communications Troubleshooting, requiredTCP/IP, requiredBACnet/IP, requiredModbus, requiredDiagnostic Tools, requiredNetwork Analysis, requiredPower Meters, requiredPDUs, requiredATSs, requiredGenerators, requiredSTSs, requiredUPSs, requiredBattery Systems, requiredPerformance Monitoring, requiredTrend Analysis, requiredAlarm Review, requiredSystem Behavior Validation, requiredControls Software Troubleshooting, requiredMechanical Faults Troubleshooting, requiredElectrical Faults Troubleshooting, requiredField Device Faults Troubleshooting, requiredCorrective Actions Support, requiredTest Scripts Completion, requiredReports Completion, requiredIssue Logs Completion, requiredRedline Drawings, requiredVerify Drawings, requiredVendor Submittals Review, requiredTechnical Documentation Review, requiredTechnical Guidance, requiredCoaching, requiredApplicable Codes Awareness, requiredStandards Awareness, requiredSafe Work Practices Awareness, requiredEffective Communication, requiredTechnical Communication, requiredCommunication, requiredControls Logic Troubleshooting, requiredNetworking Troubleshooting, requiredThird-Party Integrations Troubleshooting, requiredBuilding Automation Networking, required

Qualifications

5+ Years BMS, EMCS, and/or EPMS Project Startup and Commissioning Experience, required5+ Years High-Level System Configuration, Integration, and Advanced Troubleshooting Experience, requiredTravel Within VA, DC, MD, and Other U.S. Project Locations, required10+ Years Experience With Installation, Troubleshooting and/or Testing of EPMS, BMS, Industrial Instrumentation and/or SCADA Systems, requiredHigh School Diploma With 10+ Years Experience, requiredAssociate's Degree With 8+ Years Experience, requiredBachelor's Degree With 5+ Years Experience, requiredReliable Attendance at Customer Site, requiredMinimum of One BMS or Automation Platform Certification, required

Full job description

Overview

About M.C. Dean

M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation’s most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.

Why Join Us?

Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values—agility, expertise, and trust—we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries.

Technical Specialist 3 (BMS & EMCS) provides senior‑level technical support for the startup, commissioning, integration, and troubleshooting of Building Management Systems (BMS), Electrical Monitoring and Control Systems (EMCS), and Electrical Power Monitoring Systems (EPMS). This role operates on active project sites and at M.C. Dean facilities, executing and leading L3 startup, L4 functional commissioning, and L5 Integrated Systems Testing (IST) activities. The TS‑3 works with a high level of independence and serves as a technical resource to TS‑1 and TS‑2 personnel, while coordinating closely with controls engineers, project leaders, engineering leaders, commissioning teams, construction staff, and customers.

The role includes responsibility for complex troubleshooting, system integration validation, and customer‑facing testing activities such as Factory Acceptance Testing. The Technical Specialist 3 plays a key role in ensuring systems perform in accordance with design intent, specifications, and operational requirements, while maintaining safe work practices and supporting high‑quality project delivery across Virginia, Washington DC, Maryland, and other U.S. project locations.

Responsibilities

Key Responsibilities of Technical Specialist 3 (BMS & EMCS) include:

  • Lead and execute delivery of BMS, EMCS, and EPMS systems, with responsibility for startup, integration, testing, commissioning, and advanced troubleshooting

  • Perform and oversee L3 startup activities, including point‑to‑point verification and sequence validation, providing guidance to junior technicians as needed

  • Execute and support L4 functional commissioning and L5 Integrated Systems Testing (IST) with minimal supervision

  • Support and lead Pre-Installation Testing and Check Out (PITCO) activities at M.C. Dean facilities

  • Serve as onsite technical escalation point for controls, communication, and integration issues

  • Configure, load, update, and validate BMS controllers, devices, and communication parameters

  • Perform advanced troubleshooting of controls logic, system configuration, sequences of operation, and network communications

  • Configure and troubleshoot TCP/IP, BACnet/IP, and Modbus communications, including controllers, gateways, and third‑party devices, using diagnostic tools and network analysis

  • Integrate and validate BMS/EPMS communications for power meters, PDUs, ATSs, generators, STSs, UPSs, battery systems, and related equipment

  • Navigate BMS platforms to monitor performance, analyze trends, review alarms, and validate system behavior

  • Distinguish between controls software/configuration issues and mechanical, electrical, or field device faults, and support corrective actions

  • Execute commissioning and testing procedures and ensure accurate completion of test scripts, reports, and issue logs

  • Redline and verify BMS, EMCS, EPMS, and controls drawings to reflect as‑built conditions

  • Assist with review of vendor submittals and technical documentation to validate system integration and functionality

  • Provide technical guidance and mentorship to TS‑1 and TS‑2 personnel

  • Maintain awareness of applicable codes, standards, and safe work practices

  • Communicate effectively with engineering, construction, commissioning, customers, and leadership through clear technical and written communication

Qualifications

Qualifications

  • 5+ years of experience performing BMS, EMCS, and/or EPMS project startup and commissioning, or providing high‑level system configuration, integration, and advanced troubleshooting on complex BMS/EMCS/EPMS systems

  • Demonstrated ability to independently execute L3 startup, support L4 functional commissioning, and lead or support L5 Integrated Systems Testing (IST) activities

  • Advanced troubleshooting experience with controls logic, system configuration, networking, and third‑party integrations, including the ability to resolve issues spanning controls software, field devices, and mechanical or electrical systems

  • Strong working knowledge of one or more major BMS platforms such as Niagara, Siemens Desigo, or Schneider EcoStruxure; multi‑platform experience preferred

  • Solid understanding of building automation networking and communications, including TCP/IP, BACnet/IP, and Modbus

  • Proven ability to distinguish controls programming or configuration issues from sensor, device, installation, or equipment faults and drive resolution

  • Experience supporting or integrating EPMS and power monitoring systems is strongly preferred

  • Ability to read and interpret controls drawings, sequences of operation, specifications, and vendor documentation

  • Ability to work independently in the field, manage technical priorities, and provide guidance to TS‑1 and TS‑2 personnel

  • Strong focus on safety, quality, and accurate documentation

  • Effective verbal and written communication skills

  • Willingness and ability to travel within VA, DC, MD , and to other U.S. project locations as required

Education:

  • Requires 10 or more years of experience with installation, troubleshooting and/or testing of EPMS, BMS, Industrial instrumentation and/or SCADA systems

  • 10+ years of experience with a High School Diploma 8+ years of experience with an Associate's or 5+ with a bachelor's degree.

  • Requires reliable attendance at customer site during work hours required by customer

Certifications:

  • Minimum of one (1) BMS or automation platform certification (e.g., Niagara N4, Siemens Desigo, Schneider EcoStruxure, Ignition).

Abilities:

  • Exposure to computer screens for an extended period of time.

  • Sitting for extended periods of time.

  • Reach by extending hands or arms in any direction.

  • Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard.

  • Listen to and understand information and ideas presented through spoken words and sentences.

  • Communicate information and ideas in speaking so others will understand.

  • Read and understand information and ideas presented in writing.

  • Apply general rules to specific problems to produce answers that make sense.

  • Identify and understand the speech of another person.

Pay Range

USD $104,240.00 - USD $130,300.00 /Yr.

How this job compares

Set against the 279 open Technical Specialist jobs on Olive Jobs, counted November 18, 2026.

Pay
  • This posting$104–130K/yr
  • Virginia median$91–117K/yr37 salary ranges
  • US median$93–141K/yr136 salary ranges

This range's midpoint, $117K, is 11% above the Virginia median midpoint ($105K) — in the middle half of Technical Specialist salary ranges in Virginia.

Openings
Olive Jobs lists 43 open Technical Specialist jobs in Virginia and 279 across the US. 3% of them nationwide are listed as remote or flexible.
Hiring the most in Virginia
Experience
This posting asks for at least 10 years of experience — more than three in four Technical Specialist postings that state a minimum ask for (median 6 years, across 224 postings).
Education
This posting asks for a bachelor's degree; 62 of the 279 open Technical Specialist jobs (22%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 18, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.