Skip to main content
Eaton Corporation logo

Supplier Development Engineer - Electronics & PCBAs

Eaton Corporation

Charlotte, NC · HybridJob$113–165K/yrSeen todayIn the employer's feed · checked in the last 2 days

See where you stand before you apply. No sign-up to start.

You apply on the posting's application page, with no Olive account needed.

Watch jobs like this.

Don't just apply. Show up ready.

Olive works from this exact posting.

At a glance

Compensation
$113–165K/yr
Location
Charlotte, NCHybrid
Work Authorization
Not specified

Olive focuses on jobs in the United States, including remote roles you can work from there.

Requirements

Credentials this posting asks for.

Bachelor's degree, required

Job overview

Eaton’s Corporate Sector is seeking a Supplier Development Engineer focused on electronics and printed circuit board assemblies. The role develops supplier manufacturing capability, capacity, scalability, and operational readiness, while identifying and closing process and performance gaps. The engineer partners with internal teams and suppliers to support business requirements, new product introductions, supplier transfers, and sustainable improvements. The position follows a hybrid schedule and may be based at one of six listed locations.

Skills & qualifications

RequiredNice to have

Skills

Supplier Development, nice to haveManufacturing Engineering, nice to haveSupplier Quality, nice to haveSupply Chain, nice to haveElectronics Manufacturing, nice to havePCBA Manufacturing, nice to havePCB Fabrication, nice to haveComponent Traceability, nice to haveESD Controls, nice to haveMoisture-Sensitive Device Controls, nice to haveSolder Paste Management, nice to haveStencil Management, nice to haveSMT Placement, nice to haveReflow Profiling, nice to haveThrough-Hole Soldering, nice to haveSelective/Wave Soldering, nice to haveInspection, nice to haveTesting, nice to haveProgramming, nice to haveFailure Analysis, nice to haveProcess Validation, nice to haveManufacturing Capability Assessment, nice to haveSupplier Improvement, nice to haveAPQP, nice to havePPAP, nice to havePFMEA, nice to haveControl Plans, nice to haveMSA, nice to haveSPC, nice to haveStructured Problem Solving, nice to haveSupplier Capacity Analysis, nice to haveProduction-Rate Readiness, nice to haveLean, nice to haveContinuous Improvement, nice to haveSupplier Transfers, nice to haveNew Product Introduction, nice to haveCapacity Expansion, nice to haveIndustrialization, nice to haveAnalytical Decision-Making, nice to haveInfluence, nice to have

Qualifications

Bachelor's in Related Discipline, required5+ Years Manufacturing or Supplier Experience, required3+ Years Electronics or PCBA Experience, requiredTravel Up to 50%, requiredLead Auditor Qualification, nice to haveLean or Six Sigma Certification, nice to haveAdvanced Technical or Business Degree, nice to have

Benefits

Medical Insurance
401(k) Match
Paid Time Off

Full job description

Eaton’s Corporate Sector division is currently seeking a Supplier Development Engineer - Electronics & PCBAs. This position will work on a hybrid schedule and may be based at one of the following Eaton locations: Beachwood, OH; Charlotte, NC; Jackson, MI; Menomonee Falls, WI; Moon Township, PA; or Raleigh, NC.

The expected annual salary range for this role is $113000 - $165000 a year.

Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.

What you’ll do:

The Supplier Development Engineer - Electronics & PCBAs is responsible for developing supplier manufacturing capability, capacity, scalability, and operational readiness to support current and future business requirements.

In this role, you will lead supplier development activities focused on electronics and printed circuit board assemblies (PCBAs), identifying and closing manufacturing, process, capacity, and operational gaps. You will partner with Supplier Quality, Supply Chain, Engineering, Operations, Centers of Excellence (COE), and suppliers to drive measurable and sustainable improvements in supplier capability and performance.

Essential Functions:

  • Lead structured supplier development activities to identify and close manufacturing, process, capacity, and operational capability gaps. Establish development plans with clear objectives, actions, owners, timelines, and measurable outcomes.

  • Assess supplier manufacturing processes and drive improvements using process capability analysis, Lean methodologies, structured problem solving, material flow, process controls, and applicable advanced quality tools.

  • Evaluate electronics and PCBA manufacturing processes, including component and material controls, moisture management, solder paste application, component placement, reflow, selective and wave soldering, electrostatic discharge (ESD) controls, inspection, testing, traceability, process validation, and change management.

  • Assess supplier capacity and production-rate readiness against current and future business requirements. Identify constraints and drive mitigation, recovery, or expansion plans.

  • Develop supplier readiness to support new product introductions, supplier transfers, localization, volume increases, capacity expansion, and business growth.

  • Lead supplier development activities when quality, delivery, or operational issues result from manufacturing, process, capacity, or systemic capability gaps.

  • Participate in supplier site assessments and evaluate manufacturing capability, operational maturity, process controls, capacity, and readiness.

  • Support Advanced Product Quality Planning (APQP) and supplier readiness activities by identifying manufacturing, capacity, scalability, and operational risks.

  • Coach suppliers in structured problem solving, Lean, 8D, root-cause analysis, process capability, material management, and other continuous improvement methodologies.

  • Partner with Supplier Quality, Supply Chain, Engineering, Operations, COE, and other stakeholders to address critical supplier issues and business risks.

  • Establish measurable success criteria for supplier development activities and verify improvements are effective and sustainable before closure.

Qualifications:

Basic Qualifications

  • Bachelor’s degree in engineering, manufacturing, quality, supply chain, or a related technical discipline from an accredited institution.

  • Minimum of 5 years of experience in manufacturing engineering, supplier development, supplier quality, operations, or supply chain.

  • Minimum of 3 years of experience working with electronic assemblies, printed circuit board assemblies (PCBAs), or related electronic manufacturing processes.

  • Must be able to travel up to 50%.

  • No relocation benefit is being offered for this position. Only candidates currently residing within a 50-mile radius of Beachwood, OH; Charlotte, NC; Jackson, MI; Menomonee Falls, WI; Moon Township, PA; or Raleigh, NC will be considered.

Preferred Qualifications

  • Experience with electronics and PCBA manufacturing processes, including PCB fabrication and assembly, electronic component authenticity and traceability, ESD and moisture-sensitive device controls, solder paste and stencil management, surface-mount technology (SMT) placement, reflow profiling, through-hole and selective/wave soldering, inspection, testing, programming, failure analysis, and process validation.

  • Experience assessing manufacturing capability and leading supplier development and improvement activities.

  • Knowledge of APQP, Production Part Approval Process (PPAP), Process Failure Mode and Effects Analysis (PFMEA), Control Plans, Measurement System Analysis (MSA), Statistical Process Control (SPC), and structured problem-solving methodologies.

  • Experience with supplier capacity analysis and production-rate readiness.

  • Experience applying Lean and continuous improvement methodologies.

  • Experience with supplier transfers, new product introduction (NPI), capacity expansion, and industrialization.

  • Lead Auditor qualification.

  • Lean or Six Sigma certification.

  • Experience working across multiple sites, regions, and cultures.

  • Advanced technical or business degree.

Additional Information:

  • Strong analytical and data-driven decision-making skills.

  • Ability to influence and lead supplier improvement activities without direct authority.

  • Ability to lead cross-functional activities across multiple sites and functions.

  • Strong technical and business judgment when assessing supplier risk.

  • Ability to work independently in supplier-facing environments.

  • Strong relationship-building skills with suppliers and internal stakeholders.

  • Ability to communicate complex supplier issues clearly to technical, operational, and leadership audiences.

  • Strong project management, organizational, and execution skills.

  • Ability to prioritize multiple supplier development activities based on business impact and risk.

  • Ability to work effectively in a matrix organization with cross-functional accountability.

All positions may require participation in video and in-person interviews as part of the hiring process. All candidates will be evaluated based on job-related competencies, and all candidates’ privacy rights and data security will be protected in accordance with applicable laws.

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.

You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.

To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.

We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (https://www.youreatonbenefits.com/candidates) for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

How this job compares

Set against the 5,001 open Manufacturing Engineer jobs on Olive Jobs, counted November 20, 2026.

Pay
  • This posting$113–165K/yr
  • North Carolina median$95–137K/yr126 salary ranges
  • US median$95–145K/yr3,060 salary ranges

This range's midpoint, $139K, is 19% above the North Carolina median midpoint ($117K) — in the top quarter of Manufacturing Engineer salary ranges in North Carolina.

Openings
Olive Jobs lists 219 open Manufacturing Engineer jobs in North Carolina and 5,001 across the US. Under 1% of them nationwide are listed as remote or flexible.
Hiring the most in North Carolina
Experience
This posting asks for at least 5 years of experience; Manufacturing Engineer postings that state a minimum ask for 3 years at the median (4,020 postings).
Education
This posting asks for a bachelor's degree; 2,790 of the 5,001 open Manufacturing Engineer jobs (56%) ask for a bachelor's degree or higher.

Counted across the open, public US postings on Olive Jobs on November 20, 2026. Figures based on too few postings are left out.

Prepare for this role

You've read the whole posting — now see how you match it.