General Engineer - Banknote Development, Quality, and Manufacturing

Summary

This position is located at Bureau of Engraving and Printing, within the Deputy Director - Chief Operating Officer. As a General Engineer - Banknote Development, Quality, and Manufacturing, you will apply mechanical, electrical, industrial engineering or other engineering knowledge and skills required to sustain and improve processes related to banknote development, product quality, and manufacturing.

Duties

The following are the duties of this position at the GS-13. If you are selected at a lower grade level, you will have the opportunity to learn to perform all these duties, and will receive training to help you grow in this position. As a General Engineer - Banknote Development, Quality, and Manufacturing, you will: Serve as a consultant and expert advisor to Bureau components' efforts to continually improve their engineering and manufacturing quality performance; Analyze, solve problems, and improve all aspects of the banknote development and production process; Perform root-cause analysis and other problem-solving activities to identify effective corrective actions and engineering process improvements; Prepare technical recommendations that include the impact of projects on product development and manufacturing operations; and Provide expert advice to the engineering supervisor in direct support of the Chief Operating Officer's strategic objective to secure the most optimal printing equipment/software and/or material to integrate into the printing process. Requirements

All newly appointed employees to the competitive (or excepted) service are subject to a probationary (or trial) period. During this time, your performance, conduct, and suitability for continued employment will be evaluated. You will not automatically convert to permanent status at the end of the probationary (or trial) period. Your supervisor must affirmatively determine that continued employment is in the best interest of the Federal service. If no certification is made before the probationary (or trial) period ends, your appointment will be terminated. You are encouraged to actively engage with your supervisor, seek feedback, and understand role expectations. Additional guidance and support will be provided during onboarding. Public Trust - Background Investigation will be required. Complete a Declaration for Federal Employment to determine your suitability for Federal employment, at the time requested by the agency. Have your salary sent to a financial institution of your choice by Direct Deposit/Electronic Funds Transfer. Undergo a tax compliance review. If you are a male applicant born after December 31, 1959, certify that you have registered with the Selective Service System or are exempt from having to do so. Go through a Personal Identity Verification (PIV) process that requires two forms of identification from the Form I-9. Federal law requires verification of the identity and employment eligibility of all new hires in the U.S. Obtain and use a government-issued charge card for business-related travel. Submit to a drug test prior to your appointment and random drug testing while you occupy the position. Wear required safety clothing and/or equipment required by the position. This may include safety shoes, hard hats, hearing protection, gloves, masks, etc. Weekend work and overtime, if applicable, will be scheduled when needed based on production requirements as determined by Management. Key Requirements: Please refer to "Conditions of Employment." Click "Print Preview" to review the entire announcement before applying. Must be U.S. Citizen or U.S. National Qualifications

You must meet the following requirements by the closing date of this announcement. For the GS-11, you must have one year of specialized experience at a level of difficulty and responsibility equivalent to the GS-09 grade level in the Federal service. Specialized experience for this position includes: Analyzing data trends; AND Conducting root cause analysis. OR You may substitute education for specialized experience as follows: 3 years of progressively higher-level graduate education leading to a Ph.D. degree; OR Ph.D. or equivalent doctoral degree OR You may qualify by a combination of experience and education. To combine education and experience, the total percentage of experience at the required grade level compared to the requirement, as well as the percentage of completed education compared to the requirement must equal at least 100 percent. Only graduate level education in excess of the first 36 semester hours (54 quarter hours) may be combined to be considered for qualifying education.

Education

Education Requirements: The education generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. If you are qualifying based on foreign education, you must submit proof of creditability of education as evaluated by a credentialing agency. Refer to the OPM instructions. A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) How You Will Be Evaluated

This announcement is issued under "Direct-Hire" authority. Consistent with 5 U.S.C 3304 and OPM regulations (5 CFR 337 Subpart B) on direct-hire. Competitive examining rules providing for rating and ranking and veterans' preference do not apply. All candidates who meet qualification and other eligibility requirements may be referred for consideration. Your application includes your résumé, responses to the online questions, and required supporting documents. Please be sure that your résumé includes detailed information to support your qualifications for this position; failure to provide sufficient evidence in your résumé may result in a "not qualified" determination. Rating: You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics): Attention to Detail, Decision Making, Flexibility, Influencing/Negotiating, Integrity/Honesty, Interpersonal Skills, Learning, Reading Comprehension, Reasoning, Self-Management, Stress Tolerance, Teamwork Referral: All candidates who meet all the qualifications and other eligibility requirements may be referred for consideration. You may be required to participate in a selection interview. We will not reimburse costs related to the interview such as travel to and from the interview site. Displaced or surplus Federal employees (eligible for the Career Transition Assistance Plan(CTAP)/Interagency Career Transition Assistance Plan (ICTAP)): To be considered well qualified at the GS-11 grade level, and in addition to meeting specialized experience, the applicant must have achieved a well-qualified score of 85 or higher to receive priority consideration. Applicants may choose to respond to four short essay questions (200 words max each) to help us better understand your alignment with the agency's mission. These responses are optional and will not affect the applicant's eligibility. Other Information

We may select from this announcement or any other source to fill one or more vacancies. Recruitment incentives will not be offered. This is a non-bargaining unit position. We offer opportunities for telework, in accordance with agency policy. We offer opportunities for flexible work schedules. The facility typically shuts down annually between Christmas and New Year's Day. As such, all BEP employees must take leave for workdays during the shutdown period. This position requires that the successful candidate undergo personnel vetting, which includes a background investigation and enrollment upon onboarding into "Continuous Vetting." Enrollment in Continuous Vetting will result in automated record checks being conducted throughout one's employment with Treasury. The successful candidate will also be enrolled into FBI's Rap Back service, which will allow Treasury to receive notification from the FBI of criminal matters (e.g., arrests, charges, convictions) involving enrolled individuals in near real-time. For more information about individual rights, Noncriminal Justice Applicant's Privacy Rights - FBI, FD-258 Privacy Act Statement - FBI, and SEAD-3-Reporting-U.pdf (dni.gov). SUITABILITY, CLEARANCE & REQUIREMENTS: A background investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background investigation and favorable adjudication. Failure to successfully meet these requirements will be grounds for disqualification in the hiring process. The background investigation process conducted by the Bureau of Engraving and Printing is very thorough. Therefore, it is imperative that applicants exercise candor and honesty when answering background questionnaires, especially as it relates to arrest, employment, education, finances, illegal drug use, and/or other criminal history. Falsification discovered in security documents or during the background investigation process may result in an immediate negative suitability determination or immediate revocation of your interim clearance (if applicable). Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement.