Civil or Structural Engineer (Level DOE)

Job Title:

Civil or Structural Engineer (Level DOE)

Posting Start Date:

10/15/26

Job Description:

POSITION PURPOSE

This position is located at our Headquarters building in Bismarck, ND and is not a remote position.

Based on experience and education, this position will either be hired as either a Ci vil Engineer (level DOE) or a Structural Engineer (level DOE).

A successful

Civil Engineer

applies standard engineering techniques, procedures, and criteria to specific assigned civil work. Involved in the design and development, testing of materials, preparation of specifications, process study, research investigations and report preparation in the inspection involving retrofit or expansion of existing and new plant, transmission, and fuel supply facilities. Performs duties under direction of a licensed engineer.

A successful

Structural Engineer

applies standard practices and principles to specific as-signed structural work. Performs material evaluations, project inspection, and may assist with construction coordination for retrofit or expansion of existing and new plant, transmission, and fuel supply facilities. May use prescribed methods in addition to application of standard practices and principles to complete smaller projects and assist experienced engineers on projects of varying scope. Carries out assignments under the direction of a licensed engineer.

CIVIL ENGINEER ESSENTIAL DUTIES

• Perform detailed phases of engineering work to complete smaller projects and assist experienced engineers on projects of varying scope.

• Perform the engineering for: general plant , on- and off-site utilities, site grading and drainage, paving, foundations, earthwork, landfills, railroads, roads, concrete supply, aggregate supply, hydraulic structures, pipelines, construction facilities, pumping stations, communication/substation/transmission line structures, transmission lines, route and corridor layout, etc.

• Assist in developing technical specifications and drawings for the procurement division to complete purchasing of materials and contracting for the construction of assigned new or retrofit generation, transmission, or fuel supply related facilities. This includes recommendation of bidders, establishment of design criteria, preparation of detailed specifications and drawings, technical evaluation of bids, and technical assistance during negotiations.

• Following the award of contracts, coordinate the civil design with the construction coordinator and contractor (i.e., shop drawing review, design clarifications, etc.). Provide construction and contract coordination as well as field and shop inspection.

• Assist in preparing and/or reviewing vendor and engineering drawings and specifications to ensure that the design is completed in a timely, efficient manner and that the design reflects the philosophy of BEPC.

• Assist in performing engineering studies and investigations on various assigned engineering problems. Serve on assigned technical task forces.

• Assist in assessing the technical feasibility and soundness for new and retrofit projects including generation, transmission and fuel supply facilities, by-product utilization and co-generation projects. Also assist in the feasibility of engineering evaluation tests, products or equipment.

• Perform other duties as assigned.

STRUCTURAL ENGINEER ESSENTIAL DUTIES

• Provide structural engineering support for projects as assigned, including structural design work related to new or modifications of generation and transmission related facilities. This includes preparation of detailed specifications and drawings using industry standard codes and facility specific design criteria, technical assistance with the bidding process, and other technical assistance during project execution.

• Develop structural drawings in support of projects as assigned, including plans, sections, elevations, details, and 3-D models (BIM) using Autodesk products (AutoCAD, Revit, Navisworks).

• Perform technical engineering studies and investigations on various assigned engineering problems under the supervision of experienced engineers. Studies will require use of structural design software.

• Typical work functions include providing engineering for general plant and building layout, building and equipment foundations, structural steel, masonry, and concrete walls (including retaining walls), building floor and roof structures, structural requirements for building envelope, communication structures, transmission structures, structural pipe supports, lifting devices (cranes and monorails), and fall protection safety devices.

• Review vendor and consulting engineering drawings and specifications to ensure compliance with established design criteria. With the assistance of experienced engineers, initiate, review, or recommend design changes on projects.

• Provide engineering construction support for projects (i.e., shop drawing review, design clarifications, etc.) and construction and contract coordination, as well as field and shop inspection.

• Perform technical evaluation of bids and make recommendations.

• Act as a project coordinator/project engineer for assigned large or unusually complex projects.

• Perform other duties as assigned.

MINIMUM QUALIFICATIONS

• Bachelor’s degree in civil engineering from an Engineering Accreditation Commission/Accreditation Board for Engineering and Technology (EAC/ABET) accredited program.

• An emphasis in structural engineering is required for the Structural Engineer position.

• Frequent travel.

• A valid driver's license.

PREFERRED QUALIFICATIONS

• Engineer Intern (EI) or Engineer In Training (EIT) registration.

• A Professional Engineering (PE) registration.

PHYSICAL AND ENVIRONMENTAL DEMANDS

This position requires the ability to remain in a stationary position, frequent sitting, standing, walking, bending, climbing stairs and ladders, kneeling, reaching, and lifting up to 25 pounds; and occasional crawling, tightening bolts, pushing/pulling up to 50 pounds. Requires finger dexterity, good hearing and vision, and the ability to clearly exchange accurate information. Occasionally works in areas of dirt and dust, fumes, chemicals, extreme heat and cold, vibration, noise, poor ventilation, and electrical risks. Occasionally required to work in confined areas and at heights up to 600 feet. Access to work areas may require use of safety equipment, including respirators and personal fall arrest systems. This position must be able to become respirator qualified.

KEY SKILLS

• Ability to manage time with multiple active projects and work in a project team environment.

• Good interpersonal skills, critical thinking and problem-solving skills.

• Extend and apply theories, precepts, and practices to solve engineering problems.

• Basic knowledge in Microsoft Word, Excel, PowerPoint, and AutoCAD software.

• Able to become proficient in a number of other applications such as PLS-CADD and Esri GIS applications (Civil Engineer only).

• Good organizational, problem solving, and written and verbal communication skills.

• Able to analyze data and reports, conduct research, and think independently and implement recommendations.

Basin Electric wants all interested and qualified candidates to apply for employment opportunities. If you are an applicant with a disability who is unable to use our online tools to search and apply for jobs, or who needs other assistance or accommodations, please contact us at 701-223-0441. Please indicate the specifics of the assistance needed or provide your contact information, and a Basin Electric Human Resources representative will contact you. Basin Electric is an Equal Employment Opportunity Employer regarding race, color, religion, sex, sexual orientation, gender identity, national origin, disability, and veterans status.