ENGINEER

Summary

You will serve as an ENGINEER in the Radar Technologies Division, RF and Opto-Electronics Engineering Branch (LXLY) of NAVAL SURFACE WARFARE CENTER. This position is part of the Warfare Centers Personnel Demonstration Project. The ND-05 pay band is equivalent to the GS-14/15.

Duties

• You will lead the Solid-State Technologies and Advanced Packaging Division within the Radio-Frequency (RF) and Opto-electronics Engineering Branch (LXLY) in the Radar Technologies Division at Naval Surface Warfare Center Crane.
• You will provide bi-weekly reports to management detailing accomplishments, technical risks, and strategies for solid-state engineering efforts.
• You will oversee Radio-Frequency and Opto-Electronic (RF/OE) investments on behalf of the Office of the Under Secretary of Defense for Research and Engineering (OUSD(R and E)) Microelectronics Directorate and its subordinate programs.
• You will mitigate risk for critical microelectronics technologies for maritime, ground, and airborne Active Electronically Scanned Array (AESA) platforms.
• You will direct both national-level strategic investments (including the Trusted and Assured Microelectronics [T and AM] program and the Creating Helpful Incentives to Produce Semiconductors (CHIPS) Act Microelectronics Commons [ME Commons]).
• You will lead identification, maturation, and transition of Science and Technology (S and T), Research and Development (R and D) in advanced packaging/solid-state microelectronics for Department of Defense radar and Electronic Warfare (EW) systems.

Qualifications

In addition to basic education requirements, your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-04 (GS-12/13 equivalent) grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer, providing technical guidance to lead projects involving development and research of packaging and solid-state microelectronics for next-generation or legacy radar and Electronic Warfare systems. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. This position is subject to an initial drug screening, and random testing thereafter. A negative drug test result must be received by HR within 30 calendar days after the EOD (i.e., start date). The selectee's inability to successfully pass; or refusal to conduct the test may result in: 1) the tentative or final job offer being withdrawn during the recruitment process; or 2) subsequently being removed from Federal service for failure to meet a condition of employment. You may be required to sign a "Drug Test Statement of Understanding" if you are selected for this position.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. How You Will Be Evaluated

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and application package, along with your supporting documentation to determine your ability to demonstrate the following competencies: DEVELOPING OTHERS ENGINEERING PROJECT MANAGEMENT PARTNERING This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All eligibility, qualifications, and requirements must be met by the closing date of this announcement. Other Information

This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will receive priority consideration at the Full Performance Level (FPL) and if determined to be Best Qualified at the FPL, and selected, must be placed at the FPL. A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.