Supervisory General Engineer

Summary

You will serve as a Supervisory General Engineer at the Hydrologic Instrumentation Facility (HIF) providing support to assess research and development, procurement, repair and maintenance, testing, and evaluation of instruments and related equipment. Salary The salary range is between $107,510 (Step 01) - $139,764 (Step 10) First time hires to the Federal government normally start at the step 1 rate.

Duties

Some of the major duties you will perform include but are not limited to the following: Plan, Organize, direct, and supervise the work of professional, technical, administrative, and laboratory personnel engaged in specialized instrumentation testing, evaluation, and fabrication activities. Develops, reviews, and approves technical test plans and directs laboratory and field evaluations to assess the performance capabilities and effectiveness of existing and emerging instrumentation technologies. Manage a nationwide quality assurance /quality control (QA/QC) program for evaluation specialized hydrologic data collection instruments and equipment used by the USGS water mission area and other governmental organizations. Plans, coordinates, and oversees laboratory and field testing and evaluation of instrumentation, equipment, and emerging technologies, including novel systems where established technical standards, procedures, or guidance are limited or unavailable. Develop technical reports, recommendations and briefings communicating instrumentation evaluation results to management, stakeholders, scientific audiences, and other federal agencies. Represents the USGS as a technical expert in hydrologic instrumentation at national intra-agency and interagency meetings, working groups and technical forums. Requirements

Must be a U.S. Citizen or National. Appointment subject to background investigation and favorable adjudication. Males born after 12-31-59 must be registered for Selective Service. Direct Deposit participation required. Successfully pass the E-Verify employment verification check. To learn more, visit www.dhs.gov/EVerify/. You are required to complete training, obtain and maintain a government credit card with travel and purchase authority. As a condition of employment for accepting this position, you will be required to serve a 1-year probationary during which your fitness and whether your continued employment advances the public interest will be evaluated. This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. This is a supervisory position that may require completion of a supervisory probationary period. Qualifications

All qualifications must be met by the closing date of this announcement-10/30/2026-unless otherwise stated in this vacancy announcement. To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected. Minimum Qualification Requirements: To qualify for this position, you must meet the following minimum qualifications: Basic Educational Requirement AND/OR Specialized Experience for the series to which you are applying. Basic Educational Requirements: In addition to the specialized experience requirements for this position, you must meet at least one of the following: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. You must submit transcripts. -OR- B.Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) -AND- Specialized Experience Requirement: you must possess at least one full year of specialized experience equivalent to the GS-12 level in the Federal service (obtained in either the public or private sectors). Specialized experience is defined as demonstrated experience: Planning and conducting laboratory and field testing of instrumentation and equipment; applying quality assurance and quality control requirements; analyzing results and resolving complex technical issues; and documenting findings and recommendations to determine equipment performance, reliability, and suitability for operational use. You must include hours per week worked. Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This position has a mandatory education requirement. You must submit a copy of your transcript(s) to support claimed education if substituting education for experience. Transcripts must include your name, school name, grades, credit hours earned, major(s), grade point average or class ranking, and date the degree was conferred, if applicable. A typed list of courses, grades, semester/quarter hours, GPA, etc. will not be accepted. Non-submission may result in being rated not qualified for the position. Unofficial transcripts are acceptable, but if you are selected for this position and you used your education to qualify, you must provide official transcripts before you begin work. Foreign Education: To receive credit for education completed outside the United States, you must show proof that the education has been submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. Recognition of Foreign Qualifications | U.S. Department of Education. https://www.ed.gov/about/initiatives/international-affairs/recognition-of-foreign-qualification How You Will Be Evaluated

Your qualifications will be evaluated based on your application materials (e.g. resume, supporting documents), the responses you provide on the application questionnaire, and the result of any additional assessment(s) required for this position. Your resume must not exceed 2 pages. Only the document submitted as the "Resume" under the Documents section will be used to determine your qualifications/eligibility and for rating purposes. In the event you submit more than one resume, only the latest submission will be reviewed. You will be assessed in the following competencies (knowledge, skills, abilities, and other characteristics): General Engineering Leadership Measurement and Instrumentation Quality Assurance Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on an assessment may also result in your removal from consideration. To be considered for this position, you must complete all required steps in the process. In addition to the application and application questionnaire, this position requires successful completion of additional assessment(s), including a structured interview. These assessments measure the critical competencies listed above that are required to successfully perform the job. The assessment is a pass/fail assessment, and you must pass the assessment to be considered for the position. Current or former displaced Federal employees who are surplus, displaced, or involuntarily separated have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP). To be considered under CTAP/ICTAP, you must be well-qualified, score at least 85 (i.e., meet the minimum qualification requirements, including any selective placement factors; education, and experience requirements), and be able to perform the duties of the position upon entry. Providing false or misleading information on your resume or supporting documentation may result in removal from consideration or other action consistent with applicable federal hiring regulations. Applicants who include vulgar, offensive, or inappropriate language or information in their application package will be ineligible for further consideration for this position. Other Information

Additional vacancies may be filled using this job announcement. If otherwise eligible and qualified, you may be offered a recruitment or relocation incentive. The decision to offer an incentive will be made on a case-by-case basis and is neither promised nor guaranteed. For information visit: Recruitment Incentive or Relocation Incentive. A continued service agreement may be required if it is determined you are eligible for a permanent change in duty station (PCS), recruitment, or relocation incentive. All Department of Interior (DOI) employees, their spouses, and minor children may not acquire or retain any claim, permit, lease, small tract entry, or other rights granted by the Department in Federal lands, with limited exceptions. Additional ethics prohibitions can be found here, https://www.doi.gov/ethics/ethics-prohibitions. The duties of this position are suitable for telework and the selectee may be allowed to telework with supervisor approval