Safety Engineer

Summary

This position is with the U. S. Department of Labor, Occupational Safety and Health Administration (OSHA), within the Directorate of Standards and Guidance (DSG), located in Washington, DC. This position is at the full performance level. This position is inside the bargaining unit. This position is NOT remote. Selectee will be expected to report to the office above.

Duties

Duties for the Safety Engineer include, but are not limited to the following: Assisting the Office of Regulatory Analysis and the the Office of Technological Feasibility in the preparation and review of regulatory assessment studies to support standards. Responding to requests for technical information from OSHA personnel regarding unusual engineering safety problems not covered in standard procedures or readily available references. Developing and/or modifying occupational health standards and guidance materials. Providing analyses, recommendations, and evaluations of engineering feasibility of proposed abatements, standards, and variances. Developing innovative methods and techniques for evaluating hazards involving unusual or new work processes, operations, equipment, and materials. Advising experts in other national offices on the development of uniform applications, procedures and criteria for assuring compliance with general industry standards and regulations. Qualifications

THE ENGINEER SERIES HAS AN INDIVIDUAL OCCUPATIONAL REQUIREMENT. ALL APPLICANTS MUST MEET THIS REQUIREMENT IN ORDER TO BE CONSIDERED. You must meet the "Individual Occupational Requirement" and the "Specialized Experience" as described below, to qualify for the Safety Engineer position. INDIVIDUAL OCCUPATIONAL REQUIREMENT (IOR): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the Individual Occupational Requirement (IOR), applicants must meet the following specialized experience: Applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-13, in the Federal Service. Specialized Experience is the experience that equipped the applicant with the particular knowledge, skills, and abilities (KSA's) to perform the duties of the position successfully, and that is typically in or related to the position to be filled. To be creditable, specialized experience must have been equivalent to at least the next lower grade level. Qualifying specialized experience for the GS-14 includes: Experience in one or more of the following fields of engineering: mechanical, electrical, chemical, civil, industrial or materials engineering. Using OSHA standards to evaluate issues in various agricultural, construction, general industry or maritime operations and/or processes. Identifying and/or eliminating unusual general industry safety engineering issues. NOTE: In describing your experience, please be clear and specific. We will not make assumptions regarding your experience.

Education

Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service. If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum coursework requirements for this position. Click Evaluation of Foreign Education for more information. How You Will Be Evaluated

Your evaluation will be based on how well you meet the qualifications outlined in this vacancy announcement, as demonstrated through your resume and supporting documentation. You may preview application questions for this vacancy here: https://apply.usastaffing.gov/ViewQuestionnaire/13067139 SME Resume Panel Review Subject Matter Experts (SMEs) will review your resume to assess your technical qualifications based on the competencies listed below. Applicants who meet the required qualifications will advance to the next stage of the hiring process. For each below competency, SME(s) will provide a rating of 0-Not Applicable, 1-Awareness, 2-Basic, 3-Intermediate, 4-Advanced, or 5-Expert based on the content of your resume. Evaluation Factors (Competencies) - All qualified applicants will be evaluated on the following key competencies: Problem Solving Reasoning Research Technical Competence Writing The information you provide may be verified by a review of your paid, unpaid, and volunteer, as it demonstrates the competencies or skills required for the position to be filled. Your evaluation may include an interview, reference checks, or other assessment conducted by HR specialists, subject matter experts, or panel members and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc.). INFORMATION FOR CTAP ELIGIBLE(S) ONLY: If you are eligible for special priority selection under CTAP, you must be well-qualified for the position to receive consideration. CTAP eligible(s) will be considered well-qualified if they attain at least a rating score of 85 in a numerical rating scheme. Be sure to review the eligibility questions to reflect that you are applying as a CTAP eligible and submit supporting documentation. Other Information

The mission of the Department of Labor (DOL) is to protect the welfare of workers and job seekers, improve working conditions, expand high-quality employment opportunities, and assure work-related benefits and rights for all workers. Refer to these links for more information: GENERAL INFORMATION, REASONABLE ACCOMMODATION, ADDITIONAL DOCUMENTATION, FORMER FEDERAL EMPLOYEES As a condition of employment, all personnel must undergo a background investigation for access to DOL facilities, systems, information and/or classified materials before they can enter on duty: BACKGROUND INVESTIGATION This position is inside the bargaining unit. If the duty location is within the Washington, D.C. metropolitan area, the position will be included in the Local 12, AFGE bargaining unit. If the duty location is outside the Washington, D.C. metropolitan area, the position will be included in the NCFLL bargaining unit. For more information, click Telework Position Information. This is not a remote work position. The selectee will report to an assigned DOL office location on a regular basis and is eligible for participation in telework as determined by management in accordance with DOL policy. Based on agency needs, additional positions may be filled using this vacancy. The Department of Labor may use certain incentives and hiring flexibilities, currently offered by the Federal government to attract highly qualified candidates. Click here for Additional Information. The Fair Chance Act (FCA) prohibits Federal agencies from requesting an applicant's criminal history information before the agency makes a conditional offer of employment. If you believe a DOL employee has violated your rights under the FCA, you may file a complaint of the alleged violation following our agency's complaint process Guidelines for Reporting Violations of the Fair Chance Act. Note: The FCA does not apply to some positions specified under the Act, such as law enforcement or national security positions. All Department of Labor employees are subject to the provisions of the Drug-Free Workplace Program under Executive Order 12564 and Public Law 100-71.