Deputy Technical Director - Technical

Summary

You will serve as the Deputy Technical Director, Technical (DTD-T) at the Panama City Division (PCD) as a Navy technical expert in the research, development, test and evaluation (RDT&E), and life-cycle sustainment of Littoral Warfare Systems. The Panama City Division is charged with leading the Department of the Navy (DON) in capabilities related to mine warfare, expeditionary warfare, special warfare, diving and life support, Marine Corps systems, and homeland defense.

Duties

• You will establish leadership for efforts at NSWC PCD in the pursuit of Technical Excellence supporting the NAVSEA, Warfare Centers, and NSWC PCD Strategic Business Plans.
• You will lead the development of cross-Department, Division, and SYSCOM solutions to complex technical challenges (e.g., Cross-Warfare Center analyses, mission engineering, integration, and interoperability).
• You will represent the Command in external technical activities that require cross-command executive coordination, disciplined engineering and scientific processes, technical review boards, and investigations.
• You will coordinate and oversees all program elements, roles, and functions of the Chief Technology Office (00T), Chief Engineer (00E), and Quality Management (00Q).
• You will manage activities of Division functions that support Technical Warrant Holders (TWHs) by ensuring the implementation of scientific and engineering policies consistent with Systems Command (SYSCOM) technical authority guidance and direction.

Qualifications

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin. To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES. Resumes over the 2-page limit will be disqualified. Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s). If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position. TECHNICAL QUALIFICATIONS (TQs): Your resume should demonstrate accomplishments that would satisfy the technical qualifications: MTQ#1 Describe your experience leading technical analysis, technical decision-making, or tactics development for naval Mine Warfare, Expeditionary Warfare, Subsea/Seabed Warfare, Autonomous Systems, or other complex defense systems. Address how you applied engineering, scientific, systems-engineering, test, operational analysis, or sustainment principles to resolve a significant technical issue; develop, assess, or validate tactics; or transition a capability toward operational use. MTQ#2 Describe your experience establishing or improving a technical workforce-development approach for an organization or major technical function. Address how you used competency standards, qualification requirements, training plans, mentoring, succession planning, or workforce analysis to strengthen technical capability. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND All Professional Engineering series, 0801 General Physical Science series, 1301 Physics Series, 1310 Operation Research Series, 1515 Mathematics Series, 1520 Computer Science Series, 1550 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: For 0801 Professional Engineering Series: A. Degree: Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or (II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or (IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) For 1301-General Physical Science Series A degree in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics; or Combination of education and experience -- education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education; For 1310-Physics Series: A degree in physics; or related degree that included at least 24 semester hours in physics; or combination of education and experience -- courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education; See Additional Information section for course clarification. For 1515-Operations Research Series: A degree in operations research; or degree equivalent of a major that included at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus. For 1520-Mathematics Series: A degree in mathematics; or degree equivalent of a major that included at least 24 semester hours in mathematics or A combination of education and experience -- courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown in A above, plus appropriate experience or additional education. For 1550-Computer Science Series: A degree in computer science or Bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. or at least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions. An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable. How You Will Be Evaluated

Once the application process is complete, a review of your resume and supporting documentation will be conducted. If you meet minimum qualifications, your Application Package will be further reviewed to determine if you possess the Technical Qualifications (TQ) listed above. TQs must be thoroughly addressed within your two (2) page resume. Separate narratives will not be accepted or reviewed. Highly Qualified applicants may undergo one or more interviews and may be referred to the selecting official for further consideration. Additional documentation may be required in the interview/assessment process. The technical panel will review results and make recommendations on final selections to the approving authorities. This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview. If selected, you may be required to provide supporting documentation. If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All qualifications requirements must be met by the closing date of this announcement. Other Information

Senior Scientific Technical Manager (SSTM) positions are positions which exceed the ND-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities. Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service. This position is not covered by the Department of War Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of War and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf There are three key documents that contain important information about your rights and obligations. Please read and retain these documents: Noncriminal Justice Applicant's Privacy Rights, for those who undergo an FBI fingerprint-based criminal history record check for personnel vetting, which includes Rap Back, FD-258 Privacy Act Statement - FBI (this is the same statement used when your fingerprints are submitted as part of your background investigation), and SEAD-3-Reporting-U.pdf (dni.gov), (applicable to those who hold a sensitive position or have eligibility for access to classified information)" Equal Employment Opportunity (EEO) Policy Statement: http://www.eeoc.gov/federal/index.cfm Employment Information Resources - Resource Center: https://help.usajobs.gov/how-to Males born after 12-31-1959 must be registered or exempt from Selective Service (see https://www.sss.gov/RegVer/wfRegistration.aspx)