Civil Engineer

Summary

About the Position: Serves as a Journey-Level Navigation/Civil Engineer conducting complex analysis, design, and technical reviews for inland navigation structures and systems, including locks, dams, guide walls, miter gates, and channels. Candidates selected from other USACE organizations may negotiate to remain duty-stationed at their current USACE facility under an inter-district MOU, maintaining integration with their current team.

Duties

• Serve as a technical discipline engineer on multi-disciplinary Project Delivery Teams (PDTs), coordinating design tasks across functional areas and providing peer guidance and informal mentoring to lower-graded technical staff.
• Conduct detailed technical reviews of engineering analyses, feasibility studies, drawings, and specifications prepared by in-house teams or Architect-Engineer (A-E) firms to verify quality, constructability, and compliance with USACE standards.
• Develop and adapt plans, specifications, and design criteria for navigation structures—such as lock chambers, approach walls, and gate systems—by applying established methods and evaluating specialized riverine construction techniques.
• Serve as the technical lead for assigned design packages, specialized studies, and Design Documentation Reports (DDRs) for navigation rehabilitation and new construction projects.
• Act as a technical point of contact with sponsor Districts, Major Subordinate Commands (MSCs), and regional stakeholders while actively participating in USACE Communities of Practice (CoPs) to share lessons learned and best practices.
• Analyze and resolve complex, non-routine inland navigation engineering challenges using precedent and established criteria; elevates unprecedented policy or high-risk matters to senior leadership with recommended technical solutions.

Qualifications

Who May Apply: US Citizens This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer, 0810 Series: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes: engineering experience participating in the planning, analysis, or design preparation of civil works and inland navigation structures (such as locks, dams, gates, or riverine facilities); conducting technical quality reviews of drawings, specifications, and contractor submittals; serve as a technical discipline engineer on multi-disciplinary project teams and coordinating with internal and external partners to resolve technical engineering issues. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications. Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here: https://appsupport.usastaffing.gov/hc/en-us/sections/28980686389652-Reasonable-Accommodation-Information How You Will Be Evaluated

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics): Arithmetic/Mathematical Reasoning Attention to Detail Customer Service Flexibility Integrity/Honesty Interpersonal Skills Learning Reading Comprehension Self-Management Stress Tolerance Teamwork The USA Hire Assessments includes a cut score based on the minimum level of required proficiency in these critical general competencies. You must meet or exceed the cut score to be considered. You will not be considered for the position if you score below the cut score or fail to complete the assessment. Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration. Other Information

Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. This position may require a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest. Direct Deposit of Pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a(n) Engineers and Scientists (Resources and Construction) Career Program position aligned under the ???????Construction, Analysis, Science, Infrastructure & Engineers (CASIE) Career Management Directorate. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information. Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest. If you are a current federal employee duty located 50 miles or more outside of the area for this recruitment, you "may" be considered for a relocation incentive. This incentive option is not applicable to new to federal government employees. If you are a current federal employee who has received (and can provide a copy) of a job offer outside of federal service and plan to separate from federal service, you "may" be considered for a retention incentive. This incentive option is not applicable to new to federal government employees. If you are new to federal service and meet the criteria, you "may" be considered for a recruitment incentive. This incentive option is not applicable to current federal