SUPERVISORY INTERDISCIPLINARY ENVIRONMENTAL ENGINEER/PHYSICAL SCIENTIST

Summary

You will serve as a SUPERVISORY ENVIRONMENTAL ENGINEER/PHYSICAL SCIENTIST in the Environmental Compliance Branch/Product Line (EVl) of NAVAL FACILITIES ENG COMMAND HAWAII. A Cost-of-Living-Allowance (COLA) of 8.64% will be added to the stated salary.

Duties

• You will lead environmental programs (e.g., drinking water, wastewater, storm water) to recommend or initiate corrective actions for compliance, as needed.
• You will assign work to subordinate employees based on priorities, requirements, and employee capabilities to ensure work is performed and completed within established deadlines.
• You will resolve engineering issues during operational planning by modifying standard practices and adapting techniques.
• You will have demonstrated multiple years of experience with the interpretation and applicability of U.S. Environmental Protection Agency (EPA), State, local county, Department of Defense (DOD), and Navy regulations, policies, and ordinances.
• You will have demonstrated at least one year of experience as a leader, advising others on both work and administrative matters.
• You will have demonstrated multiple years of experience in providing leadership and/or stakeholders (including regulatory agencies) with project/program updates.
• You will have demonstrated multiple years of experience with contract administration, from consulting on Scopes of Work, design drawings and/or specifications to Contracting Officer Representative duties on environmental contracts.

Qualifications

FOR THE 0819 ONLY: This position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is: You must currently be a licensed Professional Engineer (PE) if applying for the 0819 series. Your license must be held in a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States. You MUST provide a copy of your current license with your application. A copy of a wall certificate that does not have an expiration date will not serve to verify this requirement. Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Interpreting environmental regulations and/or guidance to ensure compliance; 2) Preparing and presenting information related to environmental compliance/status; 3) Preparing and/or reviewing technical plans, reports, statements/scopes of work, budgets, and/or schedules; and 4) Conducting supervisory functions and completing administrative requirements to manage multiple personnel disciplines. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

For the 0819 Professional Physical Science Series: Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. For the 1301 Professional Physical Science Series: Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a bachelor's degree or higher in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. OR A combination of education and experience with education equivalent to one of the majors shown above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. How You Will Be Evaluated

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience. When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and application package, along with your supporting documentation to determine your ability to demonstrate the following competencies: DEVELOPING OTHERS FINANCIAL MANAGEMENT ORAL COMMUNICATION PARTNERING STRATEGIC THINKING WRITTEN COMMUNICATION This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview Other Information

This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. During the application process you will have an option to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. PHYSICAL DEMANDS: The work is primarily sedentary but occasionally requires some physical exertion such as long periods of standing; walking over rough, uneven, or rocky surfaces; recurring bending, crouching, stooping, stretching, reaching, or similar activities: recurring lifting of moderately heavy items. The work does not require any special physical effort. WORK ENVIRONMENT: The work area normally involves everyday risks or discomforts requiring safety precautions typical of offices or meeting and training rooms; or may involve occasional exposure to conditions in production facilities, laboratories, or construction sites requiring normal safety precautions.