TECHNICAL DIRECTOR

Summary

You will serve as the Technical Director of the Navy Crane Center in the Naval Facilities Engineering Systems Command (NAVFAC).

Duties

• You will serve as the final technical authority for the Department of Navy (DON) on the shore-based weight handling program.
• You will serve as the technical expert in the development of policies governing Navy-wide management of weight handling equipment.
• You will develop and maintain policies, establish training requirements, audit compliance with program standards, offer in-service technical support and manage acquisition of weight handling equipment.
• You will develop and maintain policies related to the design criteria, maintenance, testing, certification and operation of weight handling equipment used at Navy shore activities.
• You will provide the highest levels of engineering consultation, guidance, expertise and continuity in the Command.

Qualifications

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Candidates will not be hired based on their race, sex, color, religion, or national origin. This position has a Selective Placement Factor that will be used to screen out ineligible candidates. The Selective Placement Factor is: You must currently be a licensed Professional Engineer (PE). Your license must be held in a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States. NOTE: You must submit a copy of your current license with your application package. To meet the minimum qualification requirements for this position, your resume must show that you possess the Technical Qualifications (TQ) related to this position - NOT TO EXCEED 2 PAGES. Resumes over the 2-page limit will be disqualified. Your resume should include examples of experience, education, and accomplishments applicable to the qualification(s). If your resume does not reflect demonstrated evidence of these qualifications, you may not receive consideration for the position. TECHNICAL QUALIFICATIONS (TQs): Your resume should demonstrate accomplishments that would satisfy the technical qualifications: TQ 1. Knowledge of Crane Engineering Principles and Standards. TQ 2. Knowledge of Regulations, Policies, and Standards for Weight Handling Equipment. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND 0801 Professional Engineering Series Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: For 801 Professional Engineering Series: A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. -or- B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or (II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or (IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable. How You Will Be Evaluated

Once the application process is complete, a review of your resume and supporting documentation will be conducted. If you meet minimum qualifications, your Application Package will be further reviewed to determine if you possess the Technical Qualifications (TQ) listed above. TQs must be thoroughly addressed within your two (2) page resume. Separate narratives will not be accepted or reviewed. Highly Qualified applicants may undergo one or more interviews and may be referred to the selecting official for further consideration. Additional documentation may be required in the interview/assessment process. This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview The Ad-hoc Executive Resources Board (AERB) will review results and make recommendations on final selections to the approving authority. If selected, you may be required to provide supporting documentation. If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All qualifications requirements must be met by the closing date of this announcement. Other Information

This position is a Senior Level position in the federal government. Senior Level employees are in non-executive positions whose duties are broad and complex enough to be classified above GS 15 level. Senior level positions involve highly specialized and complex work. This position is not covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf. There are three key documents that contain important information about your rights and obligations. Please read and retain these documents: Noncriminal Justice Applicant's Privacy Rights, for those who undergo an FBI fingerprint-based criminal history record check for personnel vetting, which includes Rap Back, FD-258 Privacy Act Statement - FBI (this is the same statement used when your fingerprints are submitted as part of your background investigation), and SEAD-3-Reporting-U.pdf (dni.gov), (applicable to those who hold a sensitive position or have eligibility for access to classified information)" Equal Employment Opportunity (EEO) Policy Statement: http://www.eeoc.gov/federal/index.cfm Employment Information Resources - Resource Center: https://help.usajobs.gov/how-to Males born after 12-31-1959 must be registered or exempt from Selective Service (see https://www.sss.gov/RegVer/wfRegistration.aspx)