Civil Engineer (Geotechnical)

Summary

About the Position: This is an Civil Engineer (Geotechnical) position, GS-0810-11/12 position with U.S. Army Corps of Engineers (USACE), Little Rock District. This non- supervisory vacancy will be filled at GS-11 or GS-12 grade level. Duty Location is Little Rock, AR.

Duties

• You will serve as Geotechnical Engineer to coordinate investigations, analyses, and design of earthen dams, levees, excavations, tunneling, dewatering, instrumentation, building foundations, and other highly complex projects.
• You will review geotechnical sites for design suitability and geotechnical design considerations.
• You will prepare quality assurance and design reports for structures or foundations for preliminary investigations, survey reports, general design, final design, risk assessments, and Dam Safety Reports.
• You will review a variety of historic documents which include memoranda, foundation design reports, and contract specifications for soil, rock, and other foundation features of projects.
• You will make field trips to investigate foundation preparations, earthwork construction, paving, cofferdams, and drainage problems of major civil projects.
• You will plan layout, details, and installation of physical measurement devices which include piezometers, settlement gages, pressure gages, tiltmeters, inclinometers, uplift gages, etc.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian Employees Current Department of Defense (DOD) Civilian Employee (non-Army) Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Non-Department of Defense (DoD) Transfer Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Reinstatement Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience for GS-11: One year of specialized experience which includes: 1) Analyzing design data for segments of Civil Works/Military projects to present findings to a Senior Engineer in Charge; OR 2) Preparing Scope of Work for segments of Civil Works/Military projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09). OR Education Substitution: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to perform the work of the position, such as engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology. (Note: You must attach a copy of your transcripts.) OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. Specialized Experience for GS-12: One year of specialized experience which includes 2 out of 3 from following 1) Coordinate analysis of proposed construction project sites; AND 2) Perform design of Civil/Military projects which include at least three of the following; earthen dams/levees, excavations, tunneling, dewatering, building foundations or other highly complex construction projects; OR 3) Prepare scopes of work for Civil/Military projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Note: Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job at GS-12 grade level, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. In addition to meeting the specialized experience requirement above, to qualify for this position you must also meet the basic education requirement listed below. You will be evaluated on the basis of your level of competency in the following areas: Arithmetic/Mathematical Reasoning Attention to Detail Customer Service Flexibility Integrity/Honesty Interpersonal Skills Learning Reading Comprehension Self-Management Stress Tolerance Teamwork For GS-11: Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09). For GS-12: Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

Education Basic Requirements (for Engineers): A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) ***NOTE: You MUST provide a copy of your transcripts with your application package or you will be rated ineligible. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/. How You Will Be Evaluated

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. You may claim Military Spouse preference. Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level. You may claim Priority Placement Program (PPP) preference. DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only. Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website. Other Information

Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest. Direct deposit of pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a(n) 18 Career Field position. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information. Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulatios.