INTERDISCIPLINARY SUPERVISORY NUCLEAR ENGINEER/HEALTH PHYSICIST

Summary

You will serve as a SUPERVISORY NUCLEAR ENGINEER/HEALTH PHYSICIST in the Radiological Control Office (Code 105) of NORFOLK NAVAL SHIPYARD.

Duties

• You will serve as a Supervisory Nuclear Engineer or as a Supervisory Health Physicist with full project management responsibility.
• You will be responsible for planning the work of the subordinates.
• You will provide immediate technical assistance to the ‘Fleet and Shipyard to resolve emergent health physics problems of a complex natures.
• You will provide radiological and nuclear engineering technician consultation services to a broad and complex scope, primarily through a review of drawings, specifications and other technical documents.
• You will provide expert radiological engineering, nuclear engineering and health physics advice to the Fleet and Shipyard in connection with routine and non-routine radioactive work they perform.
• You will review reports of radiological problems encountered by the Fleet and Shipyard such as those problems documented in incident reports.
• You will direct the development of training programs for civilian and Fleet personnel ensuring consistency with the latest radiological techniques and practices.
• You will plan, organize and assure effective implementation and maintenance of health physics aspects of radiation exposure reduction program for the Fleet as well as Shipyard nuclear reactor plant repair/maintenance and associated work.

Qualifications

In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Expert knowledge and understanding of the functions and objectives of the Naval Nuclear Propulsion Program (NNPP), Radiological Control Office, Radiological Controls Qualification School, Nuclear Regulatory Commission regulations, Navsea Policies and procedures, Federal State and Shipyard regulations, Environmental Protection Agency regulations and publications and applicable technical/governance manuals sufficient to adapt or extrapolate pertinent guidelines/ Currently or previously qualified in at least one of the following NAVSEA 389-0288 articles 106.2a (Radiological Control Technician, 106.2d (Supervisory Radiological Control Technician), or article 106.3a (Nuclear Engineering Personnel). Experience directing the planning, organizing and conduct of technical program analysis and development involving key agency programs. Experience applying a wide range of qualitative and or quantitative methods of the assessment, development and improvement of programs and program effectiveness for complex management processes and systems. Experience applying fiscal, contracting and administrative policies, procedures and practices necessary to manage and determine the economic feasibility of major technical and administrative programs. Knowledge of shipyard management associated with project management, human resources, financial management, manpower, material support, and logistics support. Experience applying expert knowledge of education, science, and engineering to the design and implementation of automation technology initiatives with program-wide implications. Must possess excellent computer, project management, technical writing, and leadership skills. Administrative and supervisory ability of a high order are required to organize and coordinate the work of a professional and technical staff and obtain cooperation effort from shipyard and program managers and supervisors not directly under the line of supervision of this position. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/health-physics-series-1306/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess All Professional Engineering Positions, 0800 Individual Occupational Requirements Basic Requirements: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) Health Physics Series 1306 Individual Occupational Requirements Basic Requirements: Degree: natural science or engineering that included at least 30 semester hours in health physics, engineering, radiological science, chemistry, physics, biology, mathematics, and/or calculus. or Combination of education and experience -- courses as shown in A above, plus appropriate experience or other education; or certification as a health physicist by the American Board of Health Physics, plus appropriate experience and other education that provided an understanding of sciences applicable to health physics comparable to that described in paragraph A. How You Will Be Evaluated

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience. When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and application package, along with your supporting documentation to determine your ability to demonstrate the following competencies: ACCOUNTABILITY DEVELOPING OTHERS MANAGING HUMAN RESOURCES PROBLEM SOLVING RADIOLOGICAL SAFETY TRAINING PROGRAM ADMINISTRATION This recruitment will utilize the following technical assessment tools: Structured Resume Review, Structured Interview. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment. All eligibility, qualifications, and time-in-grade requirements must be met by the closing date of this announcement. Other Information

This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.