Arc Air Operator - 2nd Shift
Most applications go out cold — see where you stand first. No sign-up to start.
Don't just apply. Show up ready.
Olive works from this exact posting — no sign-up to start.
At a glance
Job overview
The Arc Air Operator works the second shift to remove excess metal, gating, risers, and flash from castings using carbon arc gouging, ensuring surfaces are prepared for finishing while maintaining a clean and safe work area.
Skills & qualifications
Skills
Full job description
Arc Air Operator - 2nd Shift
Pevely, MO (http://maps.google.com/maps?q=8600+Commercial+Blvd+Pevely+MO+USA+63070)
Job Type
Full-time
Description
Using Carbon Arc - Gouging, Remove all excess metals material, gating, risers, and flash as close to casting surface as possible without causing damage to casting in preparation for further processing in Finishing Area.
Requirements
-
Remove all gating, risers, and excess metal (fins feedpads) from castings per standard operational procedures.
-
Properly identify all returns and send to charging floor.
-
Use overhead bridge cranes to set up and remove castings from arc booth.
-
Perform housekeeping functions as needed to keep work area clean and safe.
-
Weekly cut up customer returns, purchased scrap and internal scrap. Properly identify for Melt & Pour.
-
Obtain poured weights on castings identified as samples if not already done by Sample Layout personnel.
-
Complete time sheets as required to accurately record how time is spent during shift.
-
Remove all sleeves and sand from casting.
-
Perform other duties as required and/or assigned by your supervisor.
Equal Opportunity Employer, including Veterans and Individuals with Disabilities
Drug Free Workplace
You've read the whole posting — now see how you match it.