Sr. Molding Technician - 1st Shift (M-Th, 5:00AM-3:30PM)
Most applications go out cold — see where you stand first. No sign-up to start.
Don't just apply. Show up ready.
Olive works from this exact posting — no sign-up to start.
At a glance
Job overview
Cirtec Medical Corporation is hiring a Sr. Molding Technician - 1st Shift (M-Th, 5:00AM-3:30PM). The Senior Molding Technician (LIM/LSR) is responsible for setting up, operating, troubleshooting, and optimizing Liquid Injection Molding (LIM) and Liquid Silicone Rubber (LSR) molding equipment to manufacture high-quality medical device components in a regulated cleanroom environment. This role ensures production meets safety, quality, productivity, and on-time delivery requirements, serving as a technical resource for the manufacturing team.
Key focus areas include Set up, operate, and troubleshoot LIM/LSR injection and transfer silicone molding presses, Perform Installation Qualification (IQ) activities for molding presses, and Establish production processes using approved machine programs, travelers, parameter sheets, and work instructions.
Successful candidates bring High School Diploma Or Equivalent, Manufacturing Technician Experience, and LIM/LSR Molding Equipment Experience. Important skills include LIM/LSR Molding Equipment Operation, Troubleshooting, Liquid Injection Molding, Liquid Silicone Rubber Molding, Medical Device Manufacturing, and Good Manufacturing Practices. Preferred (not required): Coaching.
Skills & qualifications
Skills
Qualifications
Benefits
Full job description
Job Duties
Description
About us:
For over three decades, Cirtec Medical has been a leading provider of manufacturing solutions for complex Class II and III medical devices. We specialize in providing comprehensive services from design and development to manufacturing and finished device assembly. Our expertise spans active implants and neuromodulation, interventional cardiology, structural heart, minimally invasive surgical systems, smart orthopedics, and precision components.
Our dedicated teams prioritize growth, innovation, and collaboration. We actively seek opportunities for improvement to enhance our support for clients. If you embrace a growth mindset and thrive on challenge, you may be a perfect fit for our team!
Position Summary:
The Senior Molding Technician (LIM/LSR) position is responsible for the setup, operation, troubleshooting, and optimization of Liquid Injection Molding (LIM) and Liquid Silicone Rubber (LSR) molding equipment used to manufacture high-quality medical device components in a regulated cleanroom environment.This position plays a key role in ensuring production meets safety, quality, productivity, and on-time delivery requirements.
The Sr. Molding Technician is a technical resource for the manufacturing team by providing guidance to operators, supporting engineering initiatives, assisting with process improvements, and helping resolve manufacturing and equipment issues. The position requires independent decision-making, strong technical aptitude, and a commitment to continuous improvement and Good Manufacturing Practices (cGMP).
Key Responsibilities:
Production & Equipment Operations
Set up, operate, and troubleshoot LIM/LSR injection and transfer silicone molding presses along with associated equipment
Perform Installation Qualification (IQ) activities by ensuring molding presses are configured according to engineering specifications and validation protocols
Establish production processes using approved machine programs, travelers, parameter sheets, and work instructions
Follow all machine startup, shutdown, and operational procedures while maintaining a safe work environment
Perform workstation setup using established tooling and validated process parameters
Operate molding equipment safely and efficiently while maintaining productivity goals
Assist with preventive maintenance activities and support facility-related equipment projects as needed
Quality & Documentation
Perform in-process inspections in accordance with Process Control Documents, drawings, and work instructions
Accurately complete molding travelers and maintain all production documentation using Good Documentation Practices (GDP)
Recognize quality concerns and promptly communicate issues to Quality Assurance or Production Leadership
Comply with all company quality systems, cGMP requirements, safety policies, and standard operating procedures
Assist in maintaining and improving Process Control Documents, Parameter Sheets, Work Instructions, and Standard Operating Procedures
Technical Support & Continuous Improvement
Collaborate with Manufacturing Engineering, Quality, Maintenance, and Production teams to troubleshoot technical issues
Assist engineers with process development, parameter adjustments, tooling evaluations, and product development activities
Document engineering trials and development work accurately
Provide recommendations regarding tooling design, equipment improvements, processing methods, programming requirements, and inspection techniques
Assist with the development of manufacturing costs, processes, and documentation for new or modified products
Leadership & Training
Be a SME for lower-level molding operators and manufacturing personnel
Communicate production status, priorities, and expectations during shift transitions
Promote teamwork and collaboration across production shifts
Perform assigned responsibilities independently with minimal supervision
Inventory & Materials Management
Manage material transactions by accurately scanning materials into and out of the ERP/MRP system
Ensure proper material handling, storage, and inventory accuracy throughout the production process
General Responsibilities
Maintain professionalism while working in a fast-paced manufacturing environment with changing priorities
Work overtime as needed to support production requirements
Complies with company, quality, and safety standards, policies, and procedures
An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position.
Must Have:
High School diploma, GED or equivalent
Minimum of 3 years' Manufacturing Technician Experience, preferably in the medical device industry
Minimum of 2 years' experience operating LIM/LSR molding equipment
Experience working in a Cleanroom environment
Strong mechanical aptitude with experience setting up and operating silicone molding presses
Ability to read, interpret, and apply technical drawings, blueprints, specifications, and work instructions
Working knowledge of ERP/MRP systems
Moderate computer proficiency, including Microsoft Office applications
Strong analytical, troubleshooting, and problem-solving skills
Ability to prioritize multiple tasks and work independently
Strong written and verbal communication skills
Ability to accurately perform mathematical calculations involving fractions, decimals, percentages, and production rates
Ability to read, write, speak, and comprehend English
Ability to learn new technologies and manufacturing processes
Ability to use microscopes and precision inspection equipment
Ability to stand for extended periods of time during the scheduled shift hours
Ability to safely operate manufacturing equipment and use hand tools
Ability to work in a cleanroom manufacturing environment
Ability to occasionally work overtime based on production needs
Good to Have:
Associate degree in Manufacturing Technology, Engineering Technology, or a related technical field, or equivalent industry experience
Experience supporting engineering projects and process development.
Technical report writing experience
Experience performing metallurgical cross-sections or similar technical evaluations.
Previous experience training or mentoring manufacturing operators
Shift Hours/Days: 5:00AM-3:30PM, M-Th.
Hourly Pay Range: $31 - $40.50, based on experience and qualifications
.
We work to create a culture that is built on innovation, respect, transparency and communication, and hope you take pride in being a member of our team. It is Cirtec's goal to create an enjoyable work environment and to keep the company a great place to work. We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every stage of your career and life. Our benefits include training and career development, healthcare and well-being programs including medical, dental, vision, wellness and occupational health programs, Paid Time Off and 401(k) retirement savings with a company match.
Cirtec Medical Corporation considers everyone for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender identity, national origin, ancestry, protected veteran or disability status or any factor prohibited by law. Cirtec Medical Corporation and all its related companies fully endorse equal opportunity. Cirtec Medical provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in the job application process.
Minimum Education Required
High School Diploma or Equivalent
Minimum Experience Required
3 - 20 years
Shift
First (Day)
Number of Openings
1
Public Transportation Accessible
Yes
Veterans Encouraged to Apply
No
Physical Required
Yes
Drug Test Required
Yes
Compensation
$11.41 / Hourly
Postal Code
55445
Job Type
Full Time
Place of Work
On-site
Requisition ID
2978
Job Benefits
Not specified
You've read the whole posting — now see how you match it.