Machinist/CNC Programmer Mid-Level - (841)
Most applications go out cold — see where you stand first. No sign-up to start.
Don't just apply. Show up ready.
Olive works from this exact posting — no sign-up to start.
At a glance
Requirements
Credentials this posting asks for.
Job overview
EPS Corporation is hiring a Machinist/CNC Programmer Mid-Level - (841). EPS Corporation seeks an experienced Machinist/CNC Programmer to set up, operate, and program CNC and manual equipment, translating engineering drawings into efficient processes while ensuring compliance with AS9100D and MIL-STD standards for DoD and commercial projects.
Key focus areas include Program CNC mills and lathes, Set up CNC equipment for production, and Operate CNC mills and lathes.
Successful candidates bring High School Diploma Or Ged, Trade School Certification Or Associate Degree In Machining Or Manufacturing Technology, and 5+ Years Machining Experience. Important skills include Read Technical Drawings, Develop Machining Strategies, AS9100D Quality Standards, Program CNC Mills, Program CNC Lathes, and Set Up CNC Mills. Preferred (not required): CNC Programming, Manual Machining, MIL-STD Quality Standards, and Operate CNC Mills.
Skills & qualifications
Skills
Qualifications
Full job description
Machinist/CNC Programmer Mid-Level - (841)
Share this job as a link in your status update to LinkedIn.
Job Title
Machinist/CNC Programmer Mid-Level
Location
Florida - FL 32408 USPanama City Beach, FL 32401 US (Primary)
Job Type
Full-time
Education
High School
Career Level
Experienced (Non-Manager)
Category
Engineering
Job Description
EPS Corporation is seeking an experienced and highly skilled Senior Machinist with a minimum of 5-7 years’ hands-on experience in machining and CNC programming. The successful candidate will be responsible for setting up, operating, and programming CNC and manual machining equipment to produce complex, tight-tolerance parts in support of Department of Defense (DoD) and commercial fabrication projects. The candidate must demonstrate the ability to read and interpret technical drawings, develop efficient machining strategies, and ensure conformance to AS9100D and MIL-STD quality standards.
Key Responsibilities:
-
Program, set up, and operate CNC mills and lathes (e.g., Haas, Mazak, Okuma, Fanuc-controlled machines).
-
Translate engineering drawings, 3D models, and technical data into efficient machining processes.
-
Create and optimize G-code and toolpaths using CAM software such as Mastercam, , orCAMworks (Solidworks CAM).
-
Perform quality inspections using precision measuring tools (calipers, micrometers, CMM, etc.) to verify tolerances and specifications.
-
Select appropriate tooling, fixtures, and speeds/feeds to improve throughput and part quality.
-
Conduct first article inspections and support root cause analysis on non-conforming parts.
-
Collaborate with engineers, quality inspectors, and other machinists to solve complex fabrication problems.
-
Maintain accurate production documentation and machine maintenance logs.
-
Adhere to and promote workplace safety standards and shop best practices.
-
Assist with quoting CNC machining jobs by accurately projecting production time, tooling usage, etc.
Required Qualifications:
-
High school diploma or GED required; trade school certification or associate degree in machining or manufacturing technology preferred.
-
Minimum of 5 years of machining experience, including 5+ years of CNC machine programming.
-
Proficiency in interpreting GD&T, blueprints, technical drawings, and CAD models.
-
Advanced understanding of machining materials, including aluminum, stainless steel, titanium, and polymers.
-
Experience working in a DoD or AS9100D-compliant manufacturing environment.
-
Strong problem-solving and analytical skills.
-
Ability to work independently and as part of a team in a fast-paced environment.
Preferred Qualifications:
-
CAM certification (e.g., Mastercam, CAMworks (Solidworks CAM).)
-
Experience with 5-axis machining
-
Prior work supporting military systems or defense-related prototypes
-
Familiarity with CMPro or other manufacturing data management systems
-
IPC, AWS, or NADCAP exposure is a plus
Work Conditions:
-
Position may require standing for extended periods and lifting materials up to 50 lbs.
-
Occasional overtime or weekend work based on production demands.
EPS Corporation is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.
EPS Corporation is seeking an experienced and highly skilled Senior Machinist with a minimum of 10 years’ hands-on experience in machining and CNC programming. The successful candidate will be responsible for setting up, operating, and programming CNC and manual machining equipment to produce complex, high-tolerance parts in support of Department of Defense (DoD) and commercial fabrication projects. The candidate must demonstrate the ability to read and interpret technical drawings, develop efficient machining strategies, and ensure conformance to AS9100D and MIL-STD quality standards.
Key Responsibilities:
-
Program, set up, and operate CNC mills and lathes (e.g., Haas, Mazak, Okuma, Fanuc-controlled machines).
-
Translate engineering drawings, 3D models, and technical data into efficient machining processes.
-
Create and optimize G-code and toolpaths using CAM software such as Mastercam, , orCAMworks (Solidworks CAM).
-
Perform quality inspections using precision measuring tools (calipers, micrometers, CMM, etc.) to verify tolerances and specifications.
-
Select appropriate tooling, fixtures, and speeds/feeds to improve throughput and part quality.
-
Conduct first article inspections and support root cause analysis on non-conforming parts.
-
Collaborate with engineers, quality inspectors, and other machinists to solve complex fabrication problems.
-
Maintain accurate production documentation and machine maintenance logs.
-
Adhere to and promote workplace safety standards and shop best practices.
-
Assist with quoting CNC machining jobs by accurately projecting production time, tooling usage, etc.
Required Qualifications:
-
High school diploma or GED required; trade school certification or associate degree in machining or manufacturing technology preferred.
-
Minimum of 5 years of machining experience, including 5+ years of CNC machine programming.
-
Proficiency in interpreting GD&T, blueprints, technical drawings, and CAD models.
-
Advanced understanding of machining materials, including aluminum, stainless steel, titanium, and polymers.
-
Experience working in a DoD or AS9100D-compliant manufacturing environment.
-
Strong problem-solving and analytical skills.
-
Ability to work independently and as part of a team in a fast-paced environment.
Preferred Qualifications:
-
CAM certification (e.g., Mastercam, CAMworks (Solidworks CAM).)
-
Experience with 5-axis machining
-
Prior work supporting military systems or defense-related prototypes
-
Familiarity with CMPro or other manufacturing data management systems
-
IPC, AWS, or NADCAP exposure is a plus
-
Position may require standing for extended periods and lifting materials up to 50 lbs.
-
Occasional overtime or weekend work based on production demands.
EPS Corporation is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.
If you require accessibility assistance for open position please contact the Human Resources Department (Located in NJ) at EPS Corporation.
Requirements
Desired Skills/Other Considerations
Type of Security Clearance Required
Secret
You've read the whole posting — now see how you match it.