SURFACE MAINTENANCE MECHANIC

Army National Guard Units

Baton Rouge, LAFull-time$31.26–42.05/hrPosted 1w ago

Most applications go out cold — see where you stand first. No sign-up to start.

At a glance

Compensation
$31.26–42.05/hr
Location
Baton Rouge, LA
Schedule
Full-time
Work Authorization
Not specified

Requirements

Credentials this posting asks for.

Secret Security ClearanceSecret clearanceValid Driver's License

Job overview

Army National Guard Units is hiring a SURFACE MAINTENANCE MECHANIC. The Surface Maintenance Mechanic position is a Title 32 excepted service role within the Army National Guard, located at the Joint Forces Headquarters‑State Logistics Directorate in Baton Rouge, Louisiana. The incumbent must possess hands‑on mechanical experience, maintain a Secret security clearance, and be a member of the National Guard.

Key focus areas include Perform limited diagnosis, routine repairs and maintenance on heavy‑duty mobile and combat vehicles., Use basic test equipment to determine mechanical failures and replace defective parts., and Remove, replace, adjust, clean and install components such as pumps, brakes, sensors and radiators..

Important skills include Common Hand And Power Tools, Test And Measurement Devices, Compression Testers, Voltmeters, Ohmmeters, and Pressure Gauges.

Skills & qualifications

RequiredNice to have

Skills

Common Hand and Power ToolsTest and Measurement DevicesCompression TestersVoltmetersOhmmetersPressure GaugesMechanical RepairsElectrical Schematics InterpretationHydraulic TheoryPneumatic Systems KnowledgeBasic Electronics KnowledgeDiesel Engine RepairMulti-Fuel Engine RepairGasoline Engine RepairTurbine Engine RepairAutomatic Transmission RepairManual Transmission RepairDrive Line Assembly RepairFuel Injection System RepairEmission Control System RepairRadio MaintenanceField Telephone MaintenanceAmplifier MaintenanceSwitchboard MaintenanceIntercom MaintenanceWelding (Minor)Peening Hammer UseDollies UseCanvas and Leather RepairAwls and Canvas NeedlesSafety PracticesTechnical Manual Interpretation

Qualifications

Twelve Months Experience With Hand and Power ToolsEighteen Months Experience With Complex Vehicle SystemsSecret Security ClearanceValid Driver's LicenseNational Guard MembershipSelective Service RegistrationEducation Documentation Required

Full job description

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. DEFINITION OF AREA(S) OF CONSIDERATION: Area 1 = Warrant Officer (CW-2 and below) and Enlisted members of the Louisiana National Guard. GENERAL EXPERIENCE: Must possess experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE: WG-08: Must possess at least Twelve (12) months experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs; experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories; experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments; experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships; experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics. WG-10: Must possess at least Eighteen (18) months experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems. CONDITIONS OF EMPLOYMENT: 1. Must be able to obtain and maintain the appropriate security clearance of the position. 2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. 3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. 4.Irregular and/or overtime compensatory hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. 5. The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position. 6.Utilizes safety practices and procedures following established safety rules and regulations to maintain a safe and clean work environment. 7. This is a dual-status T32 position and requires military membership. Duties & Responsibilities: (1) Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. (2) Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders. (3) Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity. (4) Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown. (5) Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs Preventive Maintenance Checks and Services (PMCS) and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc. Performs other preventive maintenance operations as required to ensure that equipment is functioning properly. (6) May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. Performs minor body and fender, or other metal repairs, using peening hammers, dollies and limited welding. Performs limited repairs and routine maintenance on small arms and accessory equipment by replacing worn or damaged parts. Makes minor repairs to canvas and leather items using bonding/sealing compounds and hand tools such as awls, canvas needles etc. (7) In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation. (8) Performs other as duties as assigned. Security clearance required: Secret

Conditions of Employment

  1. National Guard Membership is required. 2) Males born after 31 December 1959 must be registered for Selective Service. 3) Federal employment suitability as determined by a background investigation. 4) May be required to successfully complete a probationary period. MILITARY REQUIREMENTS: WARRANT OFFICER (CW-2 AND BELOW) & ENLISTED SECURITY CLEARANCE: Must maintain appropriate level of security clearance. ***LOUISIANA NATIONAL GUARD MEMBERS - Acceptance of this position may result in the loss of contracted incentive(s). For further details, contact the LANG State Incentive Manager, at (504) 278-8116 (ARMY) 391-8336 (AIR FORCE). *** NOTICE: THIS EMPLOYER PARTICIPATES IN E-VERIFY: FEDERAL LAW REQUIRED ALL EMPLOYERS TO VERIFY THE IDENTITY AND EMPLOYMENT ELIGIBILITY OF ALL PERSONS HIRED TO WORK IN THE UNITED STATES. NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Participation in direct deposit is mandatory. Education You must provide transcripts and/or other documentation as proof to support your Educational claims, and receive credit to meet the Education requirements for this position.

You've read the whole posting — now see how you match it.

SURFACE MAINTENANCE MECHANIC at Army National Guard Units | Olive Jobs