American Electric Power logo

Equipment Operator-Jr - UWUA 492-Mitchell

American Electric Power

WVFull-time$25.66–29.45/hrPosted 3mo agoSeen in employer's feed 5 days ago

Most applications go out cold — see where you stand first. No sign-up to start.

At a glance

Compensation
$25.66–29.45/hr
Location
WV
Schedule
Full-time
Work Authorization
Not specified

Requirements

Credentials this posting asks for.

Valid State Driver's License

Job overview

American Electric Power is hiring an Equipment Operator-Jr - UWUA 492-Mitchell. The Equipment Operator‑Jr performs semi‑skilled manual work, maintenance and operating duties at a power plant, handling tools, equipment, material handling devices, and assisting with boiler and coal feed operations while adhering to safety rules and training requirements.

Key focus areas include Isolate, clean, open, replace, inspect, close and return to service strainers, heat exchangers and dust collectors, Operate, clean, service and lubricate portable power driven tools and equipment and maintain work areas, and Operate, regulate, adjust, clean and perform minor maintenance on bottom ash and flyash handling equipment and associated pumps, piping and valves.

Successful candidates bring Associate Degree In Engineering/Industrial/Energy Tech, High School Diploma + 4 Yrs Experience, and High School Diploma + 2 Yrs Military Experience. Important skills include Portable Power Tools Operation, Portable Meters Use, Analyzers Operation, Oil Filtering Equipment Operation, Bottom Ash Handling Equipment Operation, and Flyash Handling Equipment Operation.

Skills & qualifications

RequiredNice to have

Skills

Portable Power Tools OperationPortable Meters UseAnalyzers OperationOil Filtering Equipment OperationBottom Ash Handling Equipment OperationFlyash Handling Equipment OperationPump OperationPiping and Valve OperationScaffolding ErectionRiggingHeating and Plumbing System MaintenanceMaterial Handling Equipment OperationForklift OperationSkid Steer Loader OperationSmall Tractor OperationAutomotive Equipment OperationFlow Diagram InterpretationPrint ReadingOSHA Guidelines KnowledgeEnvironmental Guidelines KnowledgeFirefightingFirst AidEmergency ResponseRotating Shift Availability

Qualifications

Associate Degree in Engineering Industrial or Energy TechnologyAssociate Degree in Another Discipline and Two Years Related Work ExperienceHigh School Diploma With Four Years Related Work ExperienceHigh School Diploma With Two Years Related Military ExperienceValid State Driver's LicensePhysical Ability to Stand or Walk Continuously for Up to 12 HoursSuccessful Completion of Plant Operator Selection System (POSS) TestSuccessful Completion of Plant Maintenance Selection System (MASS) TestPhysical Abilities Assessment Required

Full job description

Job Posting End Date

08-28-2026

Please note the job posting will close on the day before the posting end date

Job Summary

Perform semi-skilled manual work, maintenance and operating duties in connection with power plant operation, as assigned. Job duties may vary, depending on the line-of-progression (Operations, Maintenance or Coal Yard).

Job Description

What you’ll do:

Essential Job Functions & Tasks

  • Isolate, clean, open, replace, inspect, close and return to service strainers, heat exchangers and dust collectors.

  • Operate, clean, service and lubricate portable power driven tools and equipment. Maintain tools, equipment and work areas in a clean and orderly condition. Utilize portable meters, analyzers and equipment to conduct tests and monitoring. Lubricate and check lubrication equipment; adjust packing glands as necessary and perform necessary operative maintenance, using appropriate hand tools. Operate oil filtering equipment.

  • Operate, regulate, adjust, clean and perform minor maintenance on bottom ash and flyash handling equipment, including associated pumps, piping and valves. Monitor and inspect all plant equipment for normal operation. Identify and report abnormal conditions to the proper authority and write work orders.

  • Perform simple disassembly and assembly work, clean and recondition parts, lubricate, bolt, unbolt, wire brush and open and close inspection doors. Prepare equipment work surfaces and areas by removing insulation guards and simple housings; remove pipe covering and insulation and prepare such surfaces for recovering. Erect and remove simple scaffolding and rigging. Perform minor maintenance work on heating and plumbing systems such as repair valves, repair and replace fittings and short sections of piping; clean and replace traps.

  • Load, unload, move and handle materials, supplies and equipment; open boxes, barrels, bags and other materials. Operate material handling equipment including hoists, fork-lift trucks, skid steer loaders, small tractors and automotive equipment and their associated equipment and perform duties incidental to the operation of such equipment.

  • Perform routine cleaning of plant areas and equipment, including outside areas, as assigned. Clean oil igniters and nozzles.

  • Assist in preparing boilers and auxiliaries for operation and removal from service.

  • Monitor coal feed to mills and burners and observe conditions of fires and furnaces. Hand lance slag in boilers, hand- operating soot blowers, unplugging ash lines, disposing of clinkers and other similar work.

  • Use flow diagrams to identify system piping and equipment and revise these prints as required. Make required equipment checks and assist in performing tests and preparing related reports, graphs and curves.

  • Perform duties in accordance with Company's safety rules, operating regulations and practices and report unsafe conditions and practices. Train for and carry out assignments in firefighting, first aid and other emergency response programs as required.

  • Perform similar or less skilled work as assigned

What we’re looking for:

Education requirements are listed below:

  • Associate degree in engineering, industrial or energy technology; OR Associate degree in another discipline and two (2) years of related work experience; OR high school diploma with four (4) years of related work experience OR high school diploma with two (2) years of related military experience. Related experience is listed under Principal Accountabilities.

Required License(s)/Certification(s) are listed below:

  • Possess a valid State driver's license.

Other preferences:

  • Physical demand level is Medium and requirements details are listed below:

  • Able to stand or walk continuously for up to 12 hours. Successful completion of the Plant Operator Selection System (POSS) and the Plant Maintenance Selection System (MASS) tests are required for this position. A review of Employment Testing Information, Test-Taking Tips, together with the POSS and MASS Practice Tests may be helpful. A link to these materials may be found at AEP.com Careers by selecting Employment testing.

  • A physical abilities assessment is also required for this position

  • .Must satisfactorily complete and exhibit competency, in such time frames as may be established by the Company, all required training to advance to the Equipment Operator, Maintenance Mechanic-Junior, Coal Handler (depending on the line-of-progression) or vacate the Equipment Operator-Junior classification. This includes the ability to gain a working knowledge of all applicable operating instructions and procedures. Must be able to learn the rules, safety practices and procedures applicable to the work. Must be able to learn the tools and equipment and their use as required in the work. Must be able to read, interpret and work from simple prints and specifications and have the ability to gain a working knowledge of OSHA and Environmental guidelines. Able to work rotating shifts.

What you’ll get:

In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.

At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!

Compensation Data

Compensation Grade:

U036-595

Compensation Range:

$25.66 - $29.45

The Physical Demand Level for this job is: M – Medium Work: Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Light Work.

Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one.

It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

You've read the whole posting — now see how you match it.

Equipment Operator-Jr - UWUA 492-Mitchell | Olive Jobs