Interdisciplinary Engineer (Electrical/Electronics)
Western Area Power Administration
Most applications go out cold — see where you stand first. No sign-up to start.
Don't just apply. Show up ready.
Olive works from this exact posting — no sign-up to start.
At a glance
Requirements
Credentials this posting asks for.
Job overview
Western Area Power Administration is hiring an Interdisciplinary Engineer (Electrical/Electronics). The Interdisciplinary Engineer (Electrical/Electronics) provides leadership in planning, designing, reviewing, liaising, and coordinating control and protection systems for substations and switchyards, and must report in person to the Lakewood, CO duty location.
Key focus areas include Provide leadership in planning, design, review, liaison, and coordination of control and protection systems for substations and switchyards, Prepare and review designs, drawings, interfaces, bill of materials, and quantity estimates for control, metering, relaying, and facility power, and Coordinate office designs with other organization segments.
Important skills include Control Systems Design, Protection Systems Engineering, Digital Equipment Integration, Design Standards Development, Technical Direction, and Coordination.
Skills & qualifications
Skills
Qualifications
Full job description
As an Interdisciplinary Engineer (Electrical/Electronics), you will provide leadership in the planning, design, review, liaison, & coordination of control & protection systems for substations and switchyards. This is not a remote position. You will have to physically report to the Lakewood, CO duty location. Qualification requirements in the vacancy announcements are based on the U.S. Office of Personnel Management (OPM) Qualification Standards Handbook, which contains federal qualification standards. This handbook is available on the Office of Personnel Management's website located at: https://www.opm.gov/policy. BASIC QUALIFICATIONS:Applicants must meet the Individual Occupational Requirement (IOR) for the 0800 Series as described below:A. Degree: Engineering: To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.-OR-B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. -OR- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.-OR- Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. (Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) AND In addition to meeting the Individual Occupational Requirements for the 0800 Series, applicants must meet the specialized experience below. SPECIALIZED EXPERIENCE REQUIREMENTS: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level in the Federal service. GS-12 Level, one year of specialized experience equivalent to the next lower grade level (GS-11) in the federal service. Specialized experience for this position is defined as: Preparing designs, drawings, interfaces, bill of materials, and quantity estimates for the integration of control, metering, relaying, and other equipment in power substations and switchyards. GS-13 Level, one year of specialized experience equivalent to the next lower grade level (GS-12) in the federal service. Specialized experience for this position is defined as: Preparing designs, drawings, interfaces, bill of materials, and quantity estimates for the integration of control, metering, relaying, and other equipment in power substations and switchyards; AND Developing design standards, guidelines, or procedures concerning control and protection applications. "Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications. "Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Working Conditions: Most work is performed in an office setting, although occasional field work will be performed outdoors. Work may occasionally be performed at HV and EHV substation/transmission line sites involving hazards requiring special safety precautions around energized circuits and equipment. Physical Effort: The work is mainly sedentary, but there is some walking, climbing, and bending during field trips and when testing. As an Interdisciplinary Engineer (Electrical/Electronics), you will: Prepares and reviews designs, drawings, interfaces, bill of materials, and quantity estimates for control, metering, relaying, and facility power for substations and switchyards. Coordinates office designs with other organization segments. Selects and applies digital equipment suitable for integration of control, metering, and relaying systems located in harsh electrical environments of substations and switchyards. Prepares and recommends design standards, guidelines, and procedures concerning control and protection applications for W AP A and other industry groups. Provides technical direction and guidance to other employees as assigned. Provides technical expertise and coordination assistance to W AP A Regional maintenance office by analyzing and resolving substation operational and maintenance problems. Prepares solicitations for procurement of electrical equipment and material, and specifications for construction contracts. Reviews contractor furnished drawings and data for compliance with specifications and notifies contractor of required design revision. Conditions of Employment Must be a U.S. Citizen or National. This employer participates in the e-Verify program. Males born after 12/31/1959 must be registered for Selective Service. Suitable for Federal employment, as determined by a background investigation. May be required to successfully complete a probationary/trial period. Employees serving on a probationary or trial period may be terminated at any time during the probationary or trial period for performance, conduct, or business-related reasons in the interest of Federal service. In accordance with Executive Order 14170, applicants are encouraged to respond to the four short, free-response, essay questions in the questionnaire. Answers to these questions are not scored or rated. Your answers will be reviewed by the hiring manager and agency leadership if you are referred for selection consideration. Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications. Security clearance and associated requirements- Moderate risk. You may be required to complete a financial disclosure (OGE-450). Shift work and emergency overtime may be required. Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays. Total salary varies depending on location of position. Education Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website. DO NOT email or mail in any of your application documents. Documents will not be accepted outside of the online application system. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
You've read the whole posting — now see how you match it.