Electrical Inspector
Most applications go out cold — see where you stand first. No sign-up to start.
Don't just apply. Show up ready.
Olive works from this exact posting — no sign-up to start.
At a glance
Requirements
Credentials this posting asks for.
Job overview
Lockheed Martin is hiring an Electrical Inspector. The Electrical Inspector performs visual inspection and testing operations on aircraft electrical and electronic systems. This role involves following standard inspection procedures, engineering drawings, and other instructions to ensure compliance with specifications. The inspector utilizes electronic systems for accountability, documents non-conformances, and maintains records of deviations.
Key focus areas include Perform visual inspection and testing operations on aircraft electrical and electronic systems, Follow general instructions, standard inspection procedures, engineering drawings, and specifications, and Utilize Electronic Operation Sheet System (Solumina) for accountability of assembly/inspection operations.
Successful candidates bring Basic Knowledge Of Electrical Assembly Methods And Inspection Procedures. Important skills include Visual Inspection, Testing Operations, Electrical Assembly Methods, Inspection Procedures, Read Wiring Schematics, and Read Check Sheets Specification. Preferred (not required): Electronic Operation Sheet System (Solumina), Electronic Documentation System (Solumina), and Electronic Non-Conforming Material Rejection Report System.
Skills & qualifications
Skills
Qualifications
Benefits
Full job description
Description: Perform visual inspection and testing operations on aircraft electrical and electronic systems.
Follow general instructions, standard inspection procedures, engineering drawings, engineering specifications, check sheets, and other written or oral instructions to perform standard electrical inspection and testing operations.
Utilize Electronic Operation Sheet System (Solumina) for accountability of all assembly/inspection operations and test requirements.
Inspect systems and components for physical conditions, proper identification, completion and installation of all parts and assemblies, satisfactory workmanship.
Check for broken strands in wiring, sufficient strain relief, proper mechanical connection, identification, and condition of plugs, wiring, and insulation.
Conduct high potential and insulation resistance test on fuel gage wiring antenna cables, as occasion requires.
Document Non-Conformances utilizing Electronic Documentation System (Solumina) on assemblies and components not meeting specifications.
Maintain current record of deviations (discrepancies), and document non-conforming product due to workmanship or defective materials in accordance with current Non-Conforming Material Rejection Procedures via the electronic Non-Conforming Material Rejection Report System for parts rejection.
Perform detail specification checks and other related inspection duties as directed.
Refer unusual conditions to leadman or foreman.
Perform operator checklist as required and comply with all ESH procedures.
As required, segregate waste material and follow good housekeeping practices.
#OneLMHotJobs
Basic Qualifications:
Requires basic knowledge of electrical assembly methods and inspection procedures.
Also requires ability to read wiring schematics, check sheets specification, work guides, and written instructions, and use electrical measuring and testing equipment such as circuit analyzer, volt meter, resistance tester, etc.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Standard Monday to Friday 40 hour work week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: RMS
Relocation Available: No
Career Area: QA/Test and Inspection
Type: Full-Time
Shift: Second
You've read the whole posting — now see how you match it.