Olive Jobs

Lead Quality Technician - (843)

EPS Corporation

Rosemary Beach, FLFull-timeNo compensation foundTracked todaySeen in employer's feed today
Evaluate my fit — free

Most applications go out cold — see where you stand first. Free, no sign-up to start.

Don't just apply — show up ready

Olive works from this exact posting. Free for job seekers — no sign-up to start.

Evaluate your fitSee where you stand — strengths, gaps, and what to fix first.Start free →Tailor your résuméRewritten against this posting, with a diff of every change.Start free →Practice the interviewA voice mock interview built from this job description.Start free →

At a glance

Compensation
No compensation found
Location
Rosemary Beach, FL
Schedule
Full-time
Work Authorization
Not specified

Requirements

Credentials this posting asks for.

Secret clearance

Job overview

EPS Corporation is hiring a Lead Quality Technician - (843). EPS Corporation seeks a Lead Quality Technician with at least five years of experience performing quality inspections, precision measurements, and audits of fabricated parts and assemblies supporting DoD or naval engineering programs, preferably with experience on submersibles and maritime vessels.

Key focus areas include Provide quality-control support for work performed under the task order, including inspection, validation, evaluation, repair, and overhaul of manned and unmanned submersibles., Inspect fabricated parts, components, and assemblies for compliance with engineering drawings, specifications, contractual requirements, and established quality standards., and Identify, select, and properly use precision measurement and inspection equipment to verify GD&T requirements..

Important skills include Quality Inspections, Precision Measurements, Audits, Quality Control, Inspection, and Validation. Preferred (not required): EPS Quality Management System, AS9100D Requirements, Quality Processes Management, and NAVSEA S9086-AD-SOC-030.

Skills & qualifications

RequiredNice to have

Skills

Quality InspectionsPrecision MeasurementsAuditsQuality ControlInspectionValidationEvaluationRepairOverhaulEngineering DrawingsSpecificationsContractual RequirementsQuality StandardsGeometric Dimensioning and TolerancingWeld SymbolsMilitary and Naval Sea Systems Command Technical DocumentationIn-Process InspectionsReceiving InspectionsFinal InspectionsNonconforming ConditionsQuality DeficienciesQMS ProceduresObjective Quality EvidenceTest ProceduresMaterial CertificationsCertificates of ComplianceCertificates of ConformanceDrawing RequirementsCritical CharacteristicsQuality ReportsQuality Issues ResolutionNonconformance TaggingQuality Records ManagementHigh Level Drawing ReadingDial CaliperOutside MicrometerInside MicrometerDepth GaugeHeight GuageTorque WrenchEPS Quality Management SystemAS9100D RequirementsQuality Processes ManagementNAVSEA S9086-AD-SOC-030NAVSEA SS800-AG-MAN-010/P-9290DoD Quality RequirementsMIL-STD-31000BIPC J-STD-001EIPC-a-610NAVSEA Procedures

Qualifications

High School5+ Years Quality Inspections Experience5+ Years Precision Measurements Experience5+ Years Audits ExperienceDepartment of Defense or Naval Engineering Programs ExperienceSecret Security ClearanceManned or Unmanned Submersibles ExperienceUnderwater Vehicles ExperienceMaritime Vessels Experience

Full job description

Lead Quality Technician - (843)

Share this job as a link in your status update to LinkedIn.

Job Title

Lead Quality Technician

Location

Florida - FL 32408 USPanama City Beach, FL 32401 US (Primary)

Job Type

Full-time

Education

High School

Career Level

Experienced (Non-Manager)

Category

Engineering

Job Description

EPS Corporation is seeking a Lead Quality Technician with at least five years of experience performing quality inspections, precision measurements, and audits of fabricated parts and assemblies supporting Department of Defense (DoD) or naval engineering programs. Experience supporting manned or unmanned submersibles, underwater vehicles, or maritime vessels is highly desirable.

Job Responsibilities

  • Provide quality-control support for work performed under the task order, including the inspection, validation, evaluation, repair, and overhaul of manned and unmanned submersibles.

  • Inspect fabricated parts, components, and assemblies for compliance with engineering drawings, specifications, contractual requirements, and established quality standards.

  • Identify, select, and properly use precision measurement and inspection equipment to verify Geometric Dimensioning and Tolerancing (GD&T) requirements.

  • Read and interpret engineering drawings, GD&T requirements, weld symbols, material specifications, and applicable military and Naval Sea Systems Command (NAVSEA) technical documentation.

  • Perform in-process, receiving, and final inspections, as applicable.

  • Identify, document, and assist in resolving nonconforming conditions and other quality deficiencies.

  • Support internal and external quality audits and monitor compliance with established QMS procedures.

  • Prepare, review, and submit Objective Quality Evidence (OQE) for applicable hardware and software deliverables. OQE may include completed test procedures, inspection records, material certifications, certificates of compliance or conformance, and other documentation required by the applicable drawings, specifications, or contractual requirements.

  • Perform OQE-related activities, including:

  • Inspecting components against drawing requirements and identifying critical characteristics.

  • Reviewing and accounting for all required OQE.

  • Verifying the accuracy and completeness of inspection and test documentation.

  • Generating inspection and quality reports.

  • Resolving and documenting quality issues.

  • Maintaining and filing inspection records.

  • Applying appropriate inspection-status or nonconformance tags to components.

  • Ensuring quality records are complete, accurate, traceable, and properly maintained.

Requirements

Required Experience:

  • High level drawing reading with GD&T (Geometric Dimensioning and Tolerancing)

  • Use of:

  • Dial Caliper

  • Outside Micrometer

  • Inside Micrometer

  • Depth Gauge

  • Height Guage

  • Torque Wrench

Desired Experience:

  • The Lead Quality Technician will oversee quality-control activities and support the EPS Quality Management System (QMS) in alignment with AS9100D requirements for the Special Missions Support Systems (SMSS) program.

  • Manage quality processes for SOC-designated systems in accordance with NAVSEA S9086-AD-SOC-030 and NAVSEA SS800-AG-MAN-010/P-9290 for deep submergence and life support systems.

  • Strong knowledge of DoD quality requirements, including MIL-STD-31000B, IPC J-STD-001E, IPC-A-610, and NAVSEA procedures.

  • Proficiency with quality data reporting, metrics tracking, and enterprise CM/QA tools (e.g., CMPRO, eCRAFT, or equivalent).

Desired Skills/Other Considerations

Type of Security Clearance Required

Secret

You've read the whole posting — now see how you match it.

Evaluate my fit — free